SPECIAL OFFER - Save 10% on all
orders over € 50
Offer valid for on-line orders only. Discount shown on final checkout screen. |
|
|
Digital Camera Cleaning KitsMicro-Tools
Europe
Your Audio-Visual, Photographic and Video Repair, Tool Source. |
| Picture | Add To Basket | Part # | Description |
Price Includes MwSt. ( VAT ) |
 |  | DIGI-KIT4-F | 1.6X Sensor DSLR Cleaning Kit w/SensorWand™
Digital Camera Cleaning Kit #4 w/SensorWand™ For Nikon D1/h/x, D100, D70, D50, D200, D2H,
D2Hs, D2X · Canon D30 & D60, Canon 10-D/20-D, Rebel XT / 350D, Rebel 300D · Sony/Konica/Minolta 7D, 5D · Olympus E-1
· Pentax *ist D, *ist DS This SensorWand™ Kits Come Complete
With:
Eclipse Cleaning System
Solution Part #: PSI-3-F ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
SensorWand™, 14mm for cleaning digital camera sensors Part #: SW1 Sensor Wands are used in conjunction with Eclipse
Cleaning Solution or Chamber Clean and PEC-PADs to clean SLR Digital Cameras.
PEC-PAD Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 PEC-PADs are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe to
wrap around applicators to clean the sensor in DSLR cameras.
Low Lint Cotton Tipped Applicator, 6" Part #: 36876-10
Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for reaching those corners or spot cleaning of the sensor. Can be used with one drop
if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
DSLR Sensor Cleaning
Instructions FREE Part #: DCC-INST Printed Version of the instructions found at www.cleaningdigitalcameras.com
 Recommended by
German Magazines PHOTO VIDEO DIGITAL & CHIP | € 35.95 |
 |  | DIGI-KIT4A-F | 1.6X Sensor DSLR Cleaning Kit w/SensorWand™
& Blower
Digital Camera Cleaning Kit #4 w/SensorWand™ For Nikon D1/h/x, D100, D70, D50, D200, D2H,
D2Hs, D2X · Canon D30 & D60, Canon 10-D/20-D, Rebel XT / 350D, Rebel 300D · Sony/Konica/Minolta 7D, 5D · Olympus E-1
· Pentax *ist D, *ist DS This SensorWand™ Kits Come Complete
With:
Eclipse Cleaning System
Solution Part #: PSI-3-F ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
SensorWand™, 14mm for cleaning digital camera sensors Part #: SW1 Sensor Wands are used in conjunction with Eclipse
Cleaning Solution or Chamber Clean and PEC-PADs to clean SLR Digital Cameras.
PEC-PAD Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 PEC-PADs are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe to
wrap around applicators to clean the sensor in DSLR cameras.
Low Lint Cotton Tipped Applicator, 6" Part #: 36876-10
Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for reaching those corners or spot cleaning of the sensor. Can be used with one drop
if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
DSLR Sensor Cleaning
Instructions FREE Part #: DCC-INST Printed Version of the instructions found at www.cleaningdigitalcameras.com
 Recommended by
German Magazines PHOTO VIDEO DIGITAL & CHIP | € 42.96 |
 |  | DIGI-KIT4C-F | 1.6X Sensor DSLR Cleaning Kit w/SensorWand™
& Brush
For Nikon D1/h/x, D100, D70, D50, D200, D2H, D2Hs, D2X · Canon D30 & D60, Canon 10-D/20-D, Rebel XT / 350D,
Rebel 300D · Sony/Konica/Minolta 7D, 5D · Olympus E-1 · Pentax *ist D, *ist DS This SensorWand Kits Come Complete With:
Eclipse™ Cleaning System
Solution Part #: PSI-3-F Eclipse™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
SensorWand, 14mm for cleaning digital camera sensors Part #: SW1 Sensor Wands are used in conjunction with Eclipse™
Cleaning Solution or Chamber Clean and Pec-Pads™ to clean SLR Digital Cameras.
Pec-Pad™ Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 Pec-Pads™ are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe
to wrap around applicators to clean the sensor in DSLR cameras.
D-SLR Brush™ - Sensor Cleaning Brush for 1.5x & 1.6x Sensors
Part #: D-SLR-16 The D-SLR Brush™ is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles
of the D-SLR Brush™ are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust
particles still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor
onto the bristles leaving you with a clean sensor.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Chamber Swab™ Pkg
of 10Part #: CS-10 Used with Eclipse™ or ChamberClean™ to clean the walls of the mirror cage as a preventive measure. This helps
cut down on the dust in the mirror cage and keep the stray lubricants from contaminating a brush when using the brush method. You put a couple of drops of the chemical
on the foam swab and you clean the 3 walls of the mirror cage/chamber and the bottom side of the mirror.
DSLR Sensor Cleaning
Instructions FREE Part #: DCC-INST Printed Version of the instructions found at www.cleaningdigitalcameras.com
| € 59.95 |
 |  | DIGI-KIT4D-F | 1.6X Sensor DSLR Cleaning Kit
w/SensorWand™, Brush & Blower
For Nikon D1/h/x, D100, D70, D50, D200, D2H, D2Hs, D2X · Canon D30 & D60, Canon 10-D/20-D, Rebel XT / 350D,
Rebel 300D · Sony/Konica/Minolta 7D, 5D · Olympus E-1 · Pentax *ist D, *ist DS This SensorWand Kits Come Complete With:
Eclipse™ Cleaning
System Solution Part #: PSI-3-F Eclipse™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it
can be applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab or a Sensor Wand this is one of the best solutions for cleaning
your sensor.
SensorWand™, 14mm for cleaning digital camera sensors Part #: SW1 Sensor Wands are used in conjunction with Eclipse™
Cleaning Solution or Chamber Clean and Pec-Pads™ to clean SLR Digital Cameras.
Pec-Pad™ Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 Pec-Pads™ are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe
to wrap around applicators to clean the sensor in DSLR cameras.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Chamber Swab™ Pkg
of 10Part #: CS-10 Used with Eclipse™ or ChamberClean™ to clean the walls of the mirror cage as a preventive measure. This helps
cut down on the dust in the mirror cage and keep the stray lubricants from contaminating a brush when using the brush method. You put a couple of drops of the chemical
on the foam swab and you clean the 3 walls of the mirror cage/chamber and the bottom side of the mirror.
DSLR Sensor
Cleaning Instructions FREE Part #: DCC-INST Printed Version of the instructions found at www.cleaningdigitalcameras.com
Giottos Rocket-Air Blower
Part #: AA1900
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
This Giotto is far superior to the
typical blower brushes included in most cleaning kits!!!
| € 66.96 |
 |  | DIGI-KIT2-F | 1.6X DSLR Cleaning Kit w/Sensor Swab™
Type 2: For Nikon D1/h/x, D100, D70, D50, D200, D2H, D2Hs, D2X · Canon D30 &
D60, 10-D/20-D, Rebel XT / 350D, Rebel 300D · Sony/Konica/Minolta 7D, 5D · Olympus E-1 · Pentax *ist D, *ist DS
This SensorSwab Kits Come Complete With:
Eclipse Cleaning System
Solution Part #: PSI-3-F ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
Sensor Swab™ Cleans Digital Image Chips (Box of 12) Part #: PSI-5 Sensor Swabs are designed for cleaning CCD chips and
other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs are Officially
endorsed by Kodak, Fuji and Leica. These may be used with Eclipse or Sensor Clean.
Low Lint Cotton Tipped Applicator, 6" Part #: 36876-10
Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for reaching those corners or spot cleaning of the sensor. Can be used with one drop
if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
| € 82.95 |
 |  | DIGI-KIT2A-F | 1.6X DSLR Cleaning Kit w/Sensor Swab™ &
Blower
Type 2: For Nikon D1/h/x, D100, D70, D50, D200, D2H, D2Hs, D2X · Canon D30 &
D60, Canon 10-D/20-D, Rebel XT / 350D, Rebel 300D · Sony/Konica/Minolta 7D, 5D · Olympus E-1 · Pentax *ist D, *ist DS
This SensorSwab Kits Come Complete With:
Eclipse Cleaning System
Solution Part #: PSI-3-F ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
Sensor Swab™ Cleans Digital Image Chips (Box of 12) Part #: PSI-5 Sensor Swabs are designed for cleaning CCD chips and
other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs are Officially
endorsed by Kodak, Fuji and Leica. These may be used with Eclipse or Sensor Clean.
Low Lint Cotton Tipped Applicator, 6" Part #: 36876-10
Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for reaching those corners or spot cleaning of the sensor. Can be used with one drop
if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
Giottos Rocket-Air Blower
Part #: AA1900
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
This Giotto is far superior to the
typical blower brushes included in most cleaning kits!!! | € 89.95 |
 |  | DIGI-KIT2C-F | 1.6X DSLR Cleaning Kit w/Sensor Swab™ &
Brush
Type 2: For Nikon D1/h/x, D100, D70, D50, D200, D2H, D2Hs, D2X · Canon D30 &
D60, 10-D/20-D, Rebel XT / 350D, Rebel 300D · Sony/Konica/Minolta 7D, 5D · Olympus E-1 · Pentax *ist D, *ist DS
This SensorSwab Kits Come Complete With:
Eclipse Cleaning System
Solution Part #: PSI-3-F ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
Sensor Swab™ Cleans Digital Image Chips (Box of 12) Part #: PSI-5 Sensor Swabs are designed for cleaning CCD chips and
other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs are Officially
endorsed by Kodak, Fuji and Leica. These may be used with Eclipse or Sensor Clean.
D-SLR Brush™ - Sensor Cleaning Brush for 1.5x & 1.6x Sensors
Part #: D-SLR-16 The D-SLR Brush™ is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles
of the D-SLR Brush™ are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust
particles still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor
onto the bristles leaving you with a clean sensor.
Low Lint Cotton Tipped Applicator, 6" Part #: 36876-10
Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for reaching those corners or spot cleaning of the sensor. Can be used with one drop
if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
| € 106.96 |
 |  | DIGI-KIT2D-F | 1.6X DSLR Cleaning Kit w/Sensor Swab™,
Brush & Blower
Type 2: For Nikon D1/h/x, D100, D70, D50, D200, D2H, D2Hs, D2X · Canon D30 &
D60, Canon 10-D/20-D, Rebel XT / 350D, Rebel 300D · Sony/Konica/Minolta 7D, 5D · Olympus E-1 · Pentax *ist D, *ist DS
This SensorSwab Kits Come Complete With:
Eclipse Cleaning System
Solution Part #: PSI-3-F ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
Sensor Swab™ Cleans Digital Image Chips (Box of 12) Part #: PSI-5 Sensor Swabs are designed for cleaning CCD chips and
other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs are Officially
endorsed by Kodak, Fuji and Leica. These may be used with Eclipse or Sensor Clean.
D-SLR Brush™ - Sensor Cleaning Brush for 1.5x & 1.6x Sensors
Part #: D-SLR-16 The D-SLR Brush™ is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles
of the D-SLR Brush™ are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust
particles still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor
onto the bristles leaving you with a clean sensor.
Low Lint Cotton Tipped Applicator, 6" Part #: 36876-10
Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for reaching those corners or spot cleaning of the sensor. Can be used with one drop
if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
Giottos Rocket-Air Blower
Part #: AA1900
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
This Giotto is far superior to the
typical blower brushes included in most cleaning kits!!! | € 113.94 |
 |  | DIGI-KIT5-F | 1.3X Sensor DSLR Cleaning Kit w/SensorWand™
Digital Camera Cleaning Kit #5 w/SensorWand™ For Kodak DCS · Fuji S1, S2 & S3
· Canon 1D, 1-D Mark II · Sigma SD-10 / Foveon X3 This SensorWand™ Kits Come Complete With:
Eclipse Cleaning System
Solution Part #: PSI-3-F ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
SensorWand™, 16mm for cleaning digital camera sensors Part #: SW2 Sensor Wands are used in conjunction with Eclipse
Cleaning Solution or Chamber Clean and PEC-PADs to clean SLR Digital Cameras.
PEC-PAD Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 PEC-PADs are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe to
wrap around applicators to clean the sensor in DSLR cameras.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
DSLR Sensor Cleaning
Instructions FREE Part #: DCC-INST Printed Version of the instructions found at www.cleaningdigitalcameras.com
 Recommended by
German Magazines PHOTO VIDEO DIGITAL & CHIP | € 35.95 |
 |  | DIGI-KIT5A-F | 1.3X Sensor DSLR Cleaning Kit w/SensorWand™
& Blower
Digital Camera Cleaning Kit #5A w/SensorWand™ For Kodak DCS · Fuji S1, S2 &
S3 · Canon 1D, 1-D Mark II · Sigma SD-10 / Foveon X3 This SensorWand™ Kits Come Complete With:
Eclipse Cleaning System
Solution Part #: PSI-3-F ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
SensorWand™, 16mm for cleaning digital camera sensors Part #: SW2 Sensor Wands are used in conjunction with Eclipse
Cleaning Solution or Chamber Clean and PEC-PADs to clean SLR Digital Cameras.
PEC-PAD Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 PEC-PADs are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe to
wrap around applicators to clean the sensor in DSLR cameras.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
DSLR Sensor Cleaning
Instructions FREE Part #: DCC-INST Printed Version of the instructions found at www.cleaningdigitalcameras.com
Giottos Rocket-Air Blower
Part #: AA1900
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
This Giotto is far superior to the
typical blower brushes included in most cleaning kits!!!
 Recommended by German Magazines PHOTO VIDEO DIGITAL & CHIP | € 42.96 |
 |  | DIGI-KIT5C-F | 1.3X Sensor DSLR Cleaning Kit w/SensorWand™
& Brush
For Kodak DCS · Fuji S1, S2 & S3 · Canon 1D, 1-D Mark II · Sigma SD-10 /
Foveon X3 This SensorWand Kits Come Complete With:
Eclipse™ Cleaning
System Solution Part #: PSI-3-F Eclipse™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it
can be applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab or a Sensor Wand this is one of the best solutions for cleaning
your sensor.
SensorWand™, 16mm for cleaning digital camera sensors Part #: SW2 Sensor Wands are used in conjunction with Eclipse™
Cleaning Solution or Chamber Clean and Pec-Pads™ to clean SLR Digital Cameras.
Pec-Pad™ Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 Pec-Pads™ are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe
to wrap around applicators to clean the sensor in DSLR cameras.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Chamber Swab™ Pkg
of 10Part #: CS-10 Used with Eclipse™ or ChamberClean™ to clean the walls of the mirror cage as a preventive measure. This helps
cut down on the dust in the mirror cage and keep the stray lubricants from contaminating a brush when using the brush method. You put a couple of drops of the chemical
on the foam swab and you clean the 3 walls of the mirror cage/chamber and the bottom side of the mirror.
DSLR Sensor
Cleaning Instructions FREE Part #: DCC-INST Printed Version of the instructions found at
www.cleaningdigitalcameras.com
| € 59.95 |
 |  | DIGI-KIT5D-F | 1.3X Sensor DSLR Cleaning Kit
w/SensorWand™, Brush & Blower
For Kodak DCS · Fuji S1, S2 & S3 · Canon 1D, 1-D Mark II · Sigma SD-10 /
Foveon X3 This SensorWand Kits Come Complete With:
Eclipse™ Cleaning System
Solution Part #: PSI-3-F Eclipse™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
SensorWand™, 16mm for cleaning digital camera sensors Part #: SW2 Sensor Wands are used in conjunction with Eclipse™
Cleaning Solution or Chamber Clean and Pec-Pads™ to clean SLR Digital Cameras.
Pec-Pad™ Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 Pec-Pads™ are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe
to wrap around applicators to clean the sensor in DSLR cameras.
D-SLR Brush™ - Sensor Cleaning Brush for 1.3x Sensors Part #: D-SLR-13 The D-SLR Brush™ is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles of the
D-SLR Brush™ are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust particles
still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor onto the
bristles leaving you with a clean sensor.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Chamber Swab™ Pkg
of 10Part #: CS-10 Used with Eclipse™ or ChamberClean™ to clean the walls of the mirror cage as a preventive measure. This helps
cut down on the dust in the mirror cage and keep the stray lubricants from contaminating a brush when using the brush method. You put a couple of drops of the chemical
on the foam swab and you clean the 3 walls of the mirror cage/chamber and the bottom side of the mirror.
DSLR Sensor Cleaning
Instructions FREE Part #: DCC-INST Printed Version of the instructions found at www.cleaningdigitalcameras.com
Giottos Rocket-Air Blower
Part #: AA1900
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
This Giotto is far superior to the
typical blower brushes included in most cleaning kits!!!
| € 66.96 |
 |  | DIGI-KIT1-F | 1.3X DSLR Cleaning Kit w/Sensor Swab™
Type 1: For Kodak DCS · Fuji S1, S2 & S3 · Canon 1D, 1-D Mark
II · Sigma SD-10 / Foveon X3 This SensorSwab Kits Come Complete
With:
Eclipse Cleaning System
Solution Part #: PSI-3-F ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
Sensor Swab™ Cleans Digital Image Chips (Box of 12) Part #: PSI-4 Sensor Swabs are designed for cleaning CCD chips and
other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs are Officially
endorsed by Kodak, Fuji and Leica. These may be used with Eclipse or Sensor Clean.
Low Lint Cotton Tipped Applicator, 6" Part #: 36876-10
Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for reaching those corners or spot cleaning of the sensor. Can be used with one drop
if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
| € 82.95 |
 |  | DIGI-KIT1A-F | 1.3X DSLR Cleaning Kit w/SensorSwab &
Blower
Type 1: For Kodak DCS · Fuji S1, S2 & S3 · Canon 1D, 1-D
Mark II · Sigma SD-10 / Foveon X3
This SensorSwab Kits Come Complete With:
Eclipse Cleaning System Solution Part #: PSI-3-F
ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be applied leaving absolutely no residue. Used with an appropriate
applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your sensor.
Sensor Swab™ Cleans Digital Image Chips (Box of 12) Part #: PSI-4
Sensor Swabs are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs
are the ultimate in purity. Sensor Swabs are Officially endorsed by Kodak, Fuji and Leica. These may be used with Eclipse or Sensor Clean.
Low Lint Cotton Tipped Applicator, 6" Part #: 36876-10
Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for reaching those corners or spot cleaning of the sensor. Can be used with one drop
if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6" long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10
Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive
measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants from contaminating a brush when using the brush method. You put a couple of
drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber and the bottom side of the mirror.
Giottos Rocket-Air Blower Part #: AA1900
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
This Giotto is far superior to the typical blower brushes included in most cleaning kits!!! | € 89.95 |
 |  | DIGI-KIT1C-F | 1.3X DSLR Cleaning Kit w/Sensor Swab™ &
Brush
Type 1: For Kodak DCS · Fuji S1, S2 & S3 · Canon 1D, 1-D
Mark II · Sigma SD-10 / Foveon X3 This SensorSwab Kits Come
Complete With:
Eclipse™ Cleaning System
Solution Part #: PSI-3-F Eclipse™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
Sensor
Swab Cleans Digital Image Chips (Box of 12) Part #: PSI-4 Sensor Swabs™ are designed for cleaning CCD chips and other delicate
or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs™ are Officially endorsed by
Kodak, Fuji and Leica. These may be used with Eclipse™ or Sensor Clean.
D-SLR Brush™ - Sensor Cleaning Brush for 1.3x Sensors Part #: D-SLR-13 The D-SLR Brush™ is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles of the
D-SLR Brush™ are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust particles
still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor onto the
bristles leaving you with a clean sensor.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Chamber Swab™ Pkg
of 10Part #: CS-10 Used with Eclipse™ or ChamberClean™ to clean the walls of the mirror cage as a preventive measure. This helps
cut down on the dust in the mirror cage and keep the stray lubricants from contaminating a brush when using the brush method. You put a couple of drops of the chemical
on the foam swab and you clean the 3 walls of the mirror cage/chamber and the bottom side of the mirror.
| € 106.96 |
 |  | DIGI-KIT1D-F | 1.3X DSLR Cleaning Kit w/SensorSwab , Brush
& Blower
Type 1: For Kodak DCS · Fuji S1, S2 & S3 · Canon 1D, 1-D
Mark II · Sigma SD-10 / Foveon X3 This SensorSwab Kits Come
Complete With:
Eclipse™ Cleaning
System Solution Part #: PSI-3-F Eclipse™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it
can be applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab or a Sensor Wand this is one of the best solutions for cleaning
your sensor.
Sensor
Swab Cleans Digital Image Chips (Box of 12) Part #: PSI-4 Sensor Swabs™ are designed for cleaning CCD chips and other delicate
or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs™ are Officially endorsed by
Kodak, Fuji and Leica. These may be used with Eclipse™ or Sensor Clean.
D-SLR Brush™ - Sensor Cleaning Brush for 1.3x Sensors Part #: D-SLR-13 The D-SLR Brush™ is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles of the
D-SLR Brush™ are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust particles
still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor onto the
bristles leaving you with a clean sensor.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Chamber Swab™ Pkg
of 10Part #: CS-10 Used with Eclipse™ or ChamberClean™ to clean the walls of the mirror cage as a preventive measure. This helps
cut down on the dust in the mirror cage and keep the stray lubricants from contaminating a brush when using the brush method. You put a couple of drops of the chemical
on the foam swab and you clean the 3 walls of the mirror cage/chamber and the bottom side of the mirror.
Giottos Rocket-Air Blower
Part #: AA1900
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
This Giotto is far superior to the
typical blower brushes included in most cleaning kits!!!
| € 113.94 |
 |  | DIGI-KIT6-F | 1.0X Sensor DSLR Cleaning Kit w/SensorWand™
Digital Camera Cleaning Kit #6 w/SensorWand™ For Canon 1Ds, EOS 5D Full Frame Sensor ·
Kodak 14n, SLR/n, SLR/c · Leica Digital Modul-R This SensorWand™ Kits Come Complete With:
Eclipse™ Cleaning System
Solution Part #: PSI-3-F ECLIPSE™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
SensorWand™, 18mm for cleaning digital camera sensors Part #: SW3 Sensor Wands are used in conjunction with Eclipse
Cleaning Solution or Chamber Clean and PEC-PADs to clean SLR Digital Cameras.
PEC-PAD Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 PEC-PADs are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe to
wrap around applicators to clean the sensor in DSLR cameras.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
DSLR Sensor Cleaning
Instructions FREE Part #: DCC-INST Printed Version of the instructions found at www.cleaningdigitalcameras.com
 Recommended by
German Magazines PHOTO VIDEO DIGITAL & CHIP | € 35.95 |
 |  | DIGI-KIT6A-F | 1.0X Sensor DSLR Cleaning Kit w/SensorWand™
& Blower
Digital Camera Cleaning Kit #6A w/SensorWand™ For Canon 1Ds, EOS 5D Full Frame Sensor ·
Kodak 14n, SLR/n, SLR/c · Leica Digital Modul-R This SensorWand™ Kits Come Complete With:
Eclipse™ Cleaning System
Solution Part #: PSI-3-F ECLIPSE™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
SensorWand™, 18mm for cleaning digital camera sensors Part #: SW3 Sensor Wands are used in conjunction with Eclipse™
Cleaning Solution or Chamber Clean and PEC-PADs to™ clean SLR Digital Cameras.
PEC-PAD Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 PEC-PADs are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe to
wrap around applicators to clean the sensor in DSLR cameras.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
DSLR Sensor Cleaning
Instructions FREE Part #: DCC-INST Printed Version of the instructions found at www.cleaningdigitalcameras.com
Giottos Rocket-Air Blower
Part #: AA1900
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
This Giotto is far superior to the
typical blower brushes included in most cleaning kits!!!
 Recommended by
German Magazines PHOTO VIDEO DIGITAL & CHIP | € 42.96 |
 |  | DIGI-KIT6C-F | 1.0X Sensor DSLR Cleaning Kit w/SensorWand™
& Brush
For Canon 1Ds, EOS 5D Full Frame Sensor · Kodak 14n, SLR/n, SLR/c · Leica Digital Modul-R
This SensorWand Kits Come Complete With:
Eclipse™ Cleaning
System Solution Part #: PSI-3-F Eclipse™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it
can be applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab or a Sensor Wand this is one of the best solutions for cleaning
your sensor.
SensorWand™, 18mm for cleaning digital camera sensors Part #: SW3 Sensor Wands are used in conjunction with Eclipse™
Cleaning Solution or Chamber Clean and Pec-Pads™ to clean SLR Digital Cameras.
Pec-Pad™ Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 Pec-Pads™ are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe
to wrap around applicators to clean the sensor in DSLR cameras.
D-SLR Brush™ - Sensor Cleaning Brush for Full Frame Sensors
Part #: D-SLR-10 The D-SLR Brush™ is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles
of the D-SLR Brush™ are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust
particles still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor
onto the bristles leaving you with a clean sensor.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Chamber Swab™ Pkg
of 10Part #: CS-10 Used with Eclipse™ or ChamberClean™ to clean the walls of the mirror cage as a preventive measure. This helps
cut down on the dust in the mirror cage and keep the stray lubricants from contaminating a brush when using the brush method. You put a couple of drops of the chemical
on the foam swab and you clean the 3 walls of the mirror cage/chamber and the bottom side of the mirror.
DSLR Sensor
Cleaning Instructions FREE Part #: DCC-INST Printed Version of the instructions found at
www.cleaningdigitalcameras.com
| € 59.95 |
 |  | DIGI-KIT6D-F | 1.0X Sensor DSLR Cleaning Kit
w/SensorWand™, Brush & Blower
For Canon 1Ds, EOS 5D Full Frame Sensor · Kodak 14n, SLR/n, SLR/c · Leica Digital Modul-R
This SensorWand Kits Come Complete With:
Eclipse™ Cleaning System
Solution Part #: PSI-3-F Eclipse™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
SensorWand™, 18mm for cleaning digital camera sensors Part #: SW3 Sensor Wands are used in conjunction with Eclipse™
Cleaning Solution or Chamber Clean and Pec-Pads™ to clean SLR Digital Cameras.
Pec-Pad™ Lint Free Wipes 4"x4"
100per/Pkg Part #: PSI-1 Pec-Pads™ are extremely strong, lint-free and so soft and pure (99.999%) Making them the perfect wipe
to wrap around applicators to clean the sensor in DSLR cameras.
D-SLR Brush™ - Sensor Cleaning Brush for Full Frame Sensors
Part #: D-SLR-10 The D-SLR Brush™ is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles
of the D-SLR Brush™ are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust
particles still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor
onto the bristles leaving you with a clean sensor.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Chamber Swab™ Pkg
of 10Part #: CS-10 Used with Eclipse™ or ChamberClean™ to clean the walls of the mirror cage as a preventive measure. This helps
cut down on the dust in the mirror cage and keep the stray lubricants from contaminating a brush when using the brush method. You put a couple of drops of the chemical
on the foam swab and you clean the 3 walls of the mirror cage/chamber and the bottom side of the mirror.
DSLR Sensor
Cleaning Instructions FREE Part #: DCC-INST Printed Version of the instructions found at www.cleaningdigitalcameras.com
Giottos Rocket-Air Blower
Part #: AA1900
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
This Giotto is far superior to the
typical blower brushes included in most cleaning kits!!!
| € 66.96 |
 |  | DIGI-KIT3-F | 1.0X DSLR Cleaning Kit w/Sensor Swab™
Type 3: For Canon 1Ds, EOS 5D Full Frame Sensor · Kodak 14n, SLR/n, SLR/c ·
Leica Digital Modul-R This SensorSwab Kits Come Complete
With:
Eclipse Cleaning System
Solution Part #: PSI-3-F ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
Sensor Swab™ Cleans Digital Image Chips (Box of 12) Part #: PSI-6 Sensor Swabs are designed for cleaning CCD chips and
other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs are Officially
endorsed by Kodak, Fuji and Leica. These may be used with Eclipse or Sensor Clean.
Low Lint Cotton Tipped Applicator, 6" Part #: 36876-10
Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for reaching those corners or spot cleaning of the sensor. Can be used with one drop
if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
| € 82.95 |
 |  | DIGI-KIT3A-F | 1.0X DSLR Cleaning Kit w/Sensor Swab™ &
Blower
Type 3: For Canon 1Ds, EOS 5D Full Frame Sensor · Kodak 14n, SLR/n, SLR/c ·
Leica Digital Modul-R This SensorSwab Kits Come Complete
With:
Eclipse Cleaning System
Solution Part #: PSI-3-F ECLIPSE lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab™ or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
Sensor Swab™ Cleans Digital Image Chips (Box of 12) Part #: PSI-6 Sensor Swabs are designed for cleaning CCD chips and
other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs are Officially
endorsed by Kodak, Fuji and Leica. These may be used with Eclipse or Sensor Clean.
Low Lint Cotton Tipped Applicator, 6" Part #: 36876-10
Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for reaching those corners or spot cleaning of the sensor. Can be used with one drop
if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Foam Swabs, 6"
long 1/4 tip Anti-Static Pkg of 10 Part #: CS-10 Used with EclipseTM or ChamberCleanTM to clean the walls of the mirror cage as a preventive measure. This helps cut down on the dust in the mirror cage and keep the stray lubricants
from contaminating a brush when using the brush method. You put a couple of drops of the chemical on the foam swab and you clean the 3 walls of the mirror cage/chamber
and the bottom side of the mirror.
Giottos Rocket-Air Blower
Part #: AA1900
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
This Giotto is far superior to the
typical blower brushes included in most cleaning kits!!! | € 89.95 |
 |  | DIGI-KIT3C-F | 1.0X DSLR Cleaning Kit w/Sensor Swab™ &
Brush
Type 3: For Canon 1Ds, EOS 5D Full Frame Sensor · Kodak 14n, SLR/n, SLR/c ·
Leica Digital Modul-R This SensorSwab Kits Come Complete
With:
Eclipse™ Cleaning
System Solution Part #: PSI-3-F Eclipse™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it
can be applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab or a Sensor Wand this is one of the best solutions for cleaning
your sensor.
Sensor
Swab Cleans Digital Image Chips (Box of 12) Part #: PSI-6 Sensor Swabs™ are designed for cleaning CCD chips and other delicate
or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs™ are Officially endorsed by
Kodak, Fuji and Leica. These may be used with Eclipse™ or Sensor Clean.
D-SLR Brush™ - Sensor Cleaning Brush for Full Frame Sensors
Part #: D-SLR-10 The D-SLR Brush™ is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles
of the D-SLR Brush™ are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust
particles still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor
onto the bristles leaving you with a clean sensor.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Chamber Swab™ Pkg
of 10Part #: CS-10 Used with Eclipse™ or ChamberClean™ to clean the walls of the mirror cage as a preventive measure. This helps
cut down on the dust in the mirror cage and keep the stray lubricants from contaminating a brush when using the brush method. You put a couple of drops of the chemical
on the foam swab and you clean the 3 walls of the mirror cage/chamber and the bottom side of the mirror.
| €
106.96 |
 |  | DIGI-KIT3D-F | 1.0X DSLR Cleaning Kit w/Sensor Swab™,
Brush & Blower
Type 3: For Canon 1Ds, EOS 5D Full Frame Sensor · Kodak 14n, SLR/n, SLR/c ·
Leica Digital Modul-R This SensorSwab Kits Come Complete
With:
Eclipse™ Cleaning System
Solution Part #: PSI-3-F Eclipse™ lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be
applied leaving absolutely no residue. Used with an appropriate applicator like a Sensor Swab or a Sensor Wand this is one of the best solutions for cleaning your
sensor.
Sensor
Swab Cleans Digital Image Chips (Box of 12) Part #: PSI-6 Sensor Swabs™ are designed for cleaning CCD chips and other delicate
or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Sensor Swabs™ are Officially endorsed by
Kodak, Fuji and Leica. These may be used with Eclipse™ or Sensor Clean.
D-SLR Brush™ - Sensor Cleaning Brush for Full Frame Sensors Part #: D-SLR-10 The D-SLR Brush™ is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles of the
D-SLR Brush™ are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust particles
still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor onto the
bristles leaving you with a clean sensor.
Low Lint Cotton
Tipped Applicator, 6" Part #: 36876-10 Commercial Grade Low Lint Cotton Tipped Applicator - 10 packages of 2 - Great for
reaching those corners or spot cleaning of the sensor. Can be used with one drop if sensor cleaning fluid or dry for polishing off the sensor after a cleaning.
Chamber Swab™ Pkg
of 10Part #: CS-10 Used with Eclipse™ or ChamberClean™ to clean the walls of the mirror cage as a preventive measure. This helps
cut down on the dust in the mirror cage and keep the stray lubricants from contaminating a brush when using the brush method. You put a couple of drops of the chemical
on the foam swab and you clean the 3 walls of the mirror cage/chamber and the bottom side of the mirror.
Giottos Rocket-Air Blower
Part #: AA1900
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
This Giotto is far superior to the
typical blower brushes included in most cleaning kits!!! | € 113.94 |