SPECIAL OFFER - Save 10% on all
orders over € 50 If you know the Part #, you can enter it here Offer valid for on-line orders only. Discount shown on final checkout screen.
Digital Camera Cleaning Supplies Micro-Tools Europe Your Audio-Visual, Photographic and Video Repair, Tool Source.
Picture	Add To Basket	Part #	Description	Price Includes MwSt. ( VAT )
Show Me!		AA1900	Blower, Giottos Rocket-Air 190mm - Natural and environmentally-friendly rubber - Air inlet valve design prevents backflow from air tube - Detachable directable super air stream air tube - Unique rocket base design provides standing function, convenient use and storage - The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity - Handy neck strap for easy carrying - Easy maintenance This Giotto is far superior to the typical blower brushes included in most cleaning kits!!!	€ 9.48
Show Me!		36876	Low Lint Cotton Tip Applicator, 6" 10/2 Low Lint Cotton Tip Applicator, 6 inch. 100 Packs of 2 Pieces. For smaller quantities order part no 36876-10 .	€ 11.60
Show Me!		VD-AB-700	Visible Dust Arctic Butterflyr SL700 Visible Dust Arctic Butterflyr SL700 Sensor Brush is an entry DSLR sensor cleaning tool for more budget orientated consumers. The Arctic Butterflyr SL700 Sensor Brush is compact and can be easily fitted into the photographer's pocket. It uses one AAA battery and has a lower spinning speed compared to the Arctic Butterflyr 724 Sensor Brush. It does not have interchangeable head with HDF( High Density Fiber) as Arctic Butterflyr 724 Sensor Brush does. It comes in one size and can be used in all DSLR sensor's for removing dust and fibers. Please take into regard the 10% discount at the checkout for orders above 50.- Euro.	€ 72.96
Show Me!		VD-AB-724	Sensor Brush Artic Butterfly 724 Sensor Brush Artic Butterfly 724 Ideal for Travel and for Light Dusting of sensor. The Arctic ButterflyT does not replace regular Sensor BrushT which has more filaments and is better suited for heavier dusting (colour may vary at time of shipment). Includes an elegant carry case for added protection and class. Requires two AAA batteries (not included). Redesigned to Include: 30% more powerful motor Durable plastic body Protective twist-off cap Snap-on battery cover On/Off Switch Design Soft Contoured Grip Durable carry case Please take into regard the 10% discount at the checkout for orders above 50.- Euro.	€ 109.96
Show Me!		VD-FSS	Visible Dust Focusing Screen SwabT Tailored for those hard to remove spots off of your focusing screen the Focusing Screen SwabT will, with the help of Visible Dust's fine array of liquids, remove any undesirable contamination. With its specially designed 45 degree angle swab head, the Focusing Screen SwabT fits into any DSLR to clear your sights through your viewfinder.	€ 35.96
Show Me!		VD-SL	Visible Dust Sensor LoupeT 5X Visible Dust Sensor LoupeT utilizes advanced (patent pending) features such as BriteVue XLT technology with high optical magnification and 6 super bright LEDs. The Sensor LoupeT is the only tool you need for locating debris on your sensor. The high quality optical glass is coated with MgF2 to reduce chromatic aberrations and to seal the lens so that no mildew buildup occurs. The high caliber materials used in construction of the Sensor LoupeT provide a high resolution, crystal clear image of the sensor. The BriteVue XLT design aids to easily spot dust on the sensor, succeeding where other tools fail. Please take into regard the 10% discount at the checkout for orders above 50.- Euro.	€ 94.95
Show Me!		VD-SL-BV	Visible Dust BriteVue Sensor LoupeT 7X The BriteVue Sensor LoupeT 7X is designed to provide a more in depth view of the sensor and chamber area. It has the ability to reveal the smallest dust particles and any other contaminants on the sensor. Utilizing advanced (patent pending) features such as BriteVue technology with high optical magnification and 6 super bright LEDs, the SensorLoupeT 7X is the only tool you need for locating debris on your sensor. The high quality optical glass is coated with MgF2 to reduce chromatic aberrations and to seal the lens so that no mildew buildup occurs. The high caliber materials used in construction of the SensorLoupeT provide a high resolution, distortion free, crystal clear image of the sensor. The BriteVue design aids to easily spot dust on the sensor, succeeding where other tools fail. The angled configuration of the 6 intensely lit LEDs, similar to that used in satellite imaging, provides a three dimensional image of the debris as opposed to linear lights of ordinary Loupes on the market. Other features include: compact design easy on/off switch high grade materials easy access to clean lens neck strap synthetic leather carrying case with belt clip The SensorLoupeT 7X from Visible Dust makes it easier then ever before in locating even the smallest dust speck without resorting to time consuming inspection through a computer monitor. Please take into regard the 10% discount at the checkout for orders above 50.- Euro.	€ 104.96
Show Me!		CS-50	Chamber SwabT 50 Pack Chamber SwabT is one of the very few true "PREVENTATIVE" products available for purchase today for assistance in preventing dust from reaching your sensor. The foamed tipped Chamber SwabT with a couple drops of EclipseT (or equivalent) will help remove the stray dust and excess lubricants from the walls of the mirror cage/chamber. By cleaning the chamber walls, you will reduce the chance of contaminating your sensor cleaning brush and help stop those unwanted critters from falling onto your sensor. We recommend cleaning the walls of your mirror chamber before every sensor cleaning. It is simple, quick to accomplish and very inexpensive. The Chamber SwabsT comes packaged in a heavy duty 6 mil resealable zipper bag for protection and storage while traveling. Also included is a set of printed instructions. www.TheDustPatrol.com	€ 12.95
Show Me!		D-SLR-16	D-SLR BrushT - Sensor Cleaning Brush 16 For 1.5x and 1.6x field-of-view magnification cameras, including Nikon D1/h/x, D100, D70, D50, D40, D200, D2H, D2Hs, D2X Canon D30 & D60, Canon 10D/20D/30D, Rebel XTi, XT / 350D, Rebel 300D Sony/Konica/Minolta 7D, 5D & Alpha Olympus E Series Contax N Digital Pentax ist D, ist DS, K110D, K100D, K10D Sigma GX-1S, SD9 and SD10 The D-SLR BrushT is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles of the D-SLR BrushT are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust particles still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor onto the bristles leaving you with a clean sensor. No sensor cleaning brush will totally eliminate the need for the wet method of sensor cleaning, but with the D-SLR BrushT you won't have to use the wet method as often, saving you time, products and money. The D-SLR BrushT kit comes complete with: 1 D-SLR BrushT & 3 ChamberSwabsT packaged inside of a polyurethane tube for protection and storage while traveling. This kit also comes with printed instructions, all of this inside a resealable, hangable 2 mil plastic bag. www.TheDustPatrol.com	€ 24.95
Show Me!		D-SLR-13	D-SLR-13- D-SLR BrushT - Sensor Cleaning For 1.3x field-of-view magnification cameras, including Kodak DCS Fuji S1, S2 & S3 Canon 1D, 1-D Mark II Sigma SD-10 / Foveon X3 The D-SLR BrushT is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles of the D-SLR BrushT are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust particles still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor onto the bristles leaving you with a clean sensor. No sensor cleaning brush will totally eliminate the need for the wet method of sensor cleaning, but with the D-SLR BrushT you won't have to use the wet method as often, saving you time, products and money. The D-SLR BrushT kit comes complete with: 1 D-SLR BrushT & 3 ChamberSwabsT packaged inside of a polyurethane tube for protection and storage while traveling. This kit also comes with printed instructions, all of this inside a resealable, hangable 2 mil plastic bag. www.TheDustPatrol.com	€ 24.95
Show Me!		D-SLR-10	D-SLR BrushT - Sensor Cleaning Brush 10 For 35mm full frame, including Canon 1Ds, EOS 5D Full Frame Sensor Kodak 14n, SLR/n, SLR/c Leica Digital Modul-R The D-SLR BrushT is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles of the D-SLR BrushT are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust particles still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor onto the bristles leaving you with a clean sensor. No sensor cleaning brush will totally eliminate the need for the wet method of sensor cleaning, but with the D-SLR BrushT you won't have to use the wet method as often, saving you time, products and money. The D-SLR BrushT kit comes complete with: 1 D-SLR BrushT & 3 ChamberSwabsT packaged inside of a polyurethane tube for protection and storage while traveling. This kit also comes with printed instructions, all of this inside a resealable, hangable 2 mil plastic bag. www.TheDustPatrol.com	€ 24.95
Show Me!		CS-10	Chamber SwabT 10 Pack Chamber SwabT is one of the very few true "PREVENTATIVE" products available for purchase today for assistance in preventing dust from reaching your sensor. The foamed tipped Chamber SwabT with a couple drops of EclipseT (or equivalent) will help remove the stray dust and excess lubricants from the walls of the mirror cage/chamber. By cleaning the chamber walls, you will reduce the chance of contaminating your sensor cleaning brush and help stop those unwanted critters from falling onto your sensor. We recommend cleaning the walls of your mirror chamber before every sensor cleaning. It is simple, quick to accomplish and very inexpensive. The Chamber SwabsT comes packaged in a heavy duty 6 mil resealable zipper bag for protection and storage while traveling. Also included is a set of printed instructions. www.TheDustPatrol.com	€ 2.86
Show Me!		SW1	SensorWandT, 14mm for cleaning digital c Sensor WandsT are used in conjunction with EclipseT Cleaning Solution (part # PSI-3-F) and PEC-PADs (part # PSI-1) to clean SLR Digital Cameras. Use The list below to make sure you choose the correct size. 14mm for Nikon D1/h/x, D100,D70, D2H Canon D30 & D60, Canon 10-D, 20-D, 300D,Pentax ist D, Olympus E-10 16mm* for Kodak DCS, Fuji S1 & S2, Canon 1D, 1-D Mark II 18mm for Kodak 14n and Canon 1Ds Full Frame Sensor	€ 6.66
Show Me!		SW2	SensorWandT, 16mm for cleaning digital c Sensor WandsT are used in conjunction with EclipseT Cleaning Solution (part # PSI-3-F) and PEC-PADs (part # PSI-1) to clean SLR Digital Cameras. Use The list below to make sure you choose the correct size. 14mm for Nikon D1/h/x, D100,D70, D2H Canon D30 & D60, Canon 10-D, Rebel 300D,Pentax ist D 16mm* for Kodak DCS, Fuji S1 & S2, Canon 1D, 1-D Mark II 18mm for Kodak 14n and Canon 1Ds Full Frame Sensor	€ 6.66
Show Me!		SW3	SensorWandT, 18mm for cleaning digital c Sensor WandsT are used in conjunction with EclipseT Cleaning Solution (part # PSI-3-F) and PEC-PADs (part # PSI-1) to clean SLR Digital Cameras. Use The list below to make sure you choose the correct size. 14mm for Nikon D1/h/x, D100,D70, D2H Canon D30 & D60, Canon 10-D, Rebel 300D,Pentax ist D 16mm* for Kodak DCS, Fuji S1 & S2, Canon 1D, 1-D Mark II 18mm for Kodak 14n and Canon 1Ds Full Frame Sensor	€ 6.66
Show Me!		PSI-4	Sensor SwabT Cleans Digital Image Chips (Box of 12) For Kodak DCS, Fuji S1, S2 & S3, Canon 1D, 1-D Mark II, Sigma SD10 & Foveon X3 Sensor Swabs are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. 12 swabs per box Recommended by EASTMAN KODAK COMPANY for cleaning the DCS family of digital cameras when used with EclipseT Optic Cleaner (sold separately). Sensor Swabs are also ideal for cleaning other recessed imaging surfaces. FUJI recommends Eclipse and Sensor Swabs for cleaning their S1 Digital Pro Camera! "Sensor SwabT is recommended by LEICA CAMERA AG for cleaning the LEICA S1 CCD chip." (when used without liquid) We recommend to order cleaning fluid PSI-3-F also !	€ 63.75
Show Me!		PSI-4-1	Sensor SwabT CCD Cleaner (Pkg of 1) For Kodak DCS, Fuji S1, S2 & S3, Canon 1D, 1-D Mark II, Sigma SD10 & Foveon X3 Sensor Swabs are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. 1 single swab. Recommended by EASTMAN KODAK COMPANY for cleaning the DCS family of digital cameras when used with EclipseT Optic Cleaner (sold separately). Sensor Swabs are also ideal for cleaning other recessed imaging surfaces. FUJI recommends Eclipse and Sensor Swabs for cleaning their S1 Digital Pro Camera! "Sensor SwabT is recommended by LEICA CAMERA AG for cleaning the LEICA S1 CCD chip." (when used without liquid) We recommend to order cleaning fluid PSI-3-F also !	€ 5.78
Show Me!		PSI-5	Sensor SwabT for Nikon & Canon digital cameras (Box of 12) These Sensor Swabs are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces on Digital cameras. For Nikon D1/h/x, D100,D70, D50, D200, D2H, D2Hs, D2X, Canon EOS D30, D60, 10-D, 20-D, 300D, EOS 350D, KonicaMinolta 5D, 7D, Olympus E1, Pentax ist D, ist DS Clean room manufactured and sealed, these swabs are the ultimate in purity. 12 swabs per box We recommend to order cleaning fluid PSI-3-F also !	€ 63.75
Show Me!		PSI-5-1	Sensor SwabT for Nikon & Can (Pkg of 1) These Sensor Swabs are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces on Digital cameras. 1 single swab. For Nikon D1/h/x, D100,D70, D50, D200, D2H, D2Hs, D2X, Canon EOS D30, D60, 10-D, 20-D, 300D, EOS 350D, KonicaMinolta 5D, 7D, Olympus E1, Pentax ist D, ist DS Clean room manufactured and sealed, these swabs are the ultimate in purity. 1 swab We recommend to order cleaning fluid PSI-3-F also !	€ 5.78
Show Me!		PSI-6	Sensor SwabT for Full Frame (Box of 12) For Canon 1Ds, 1Ds Mk II, 5D, Kodak 14n, SLR/n, SLR/c, Leica Digitlal Modul-R and all Full Frame Sensor Sensor SwabsT are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. Although these items are not officially approved by Nikon or Canon, several digital imaging site message boards have threads discussing the need for cleaning these cameras, and the success with using these products. Do so at your own risk. Read all instructions first and call us if you have questions - before proceeding. When used as directed these products are easy to use and safe and yield excellent results!	€ 63.75
Show Me!		PSI-6-1	Sensor SwabT for Full Frame (Pkg of 1) For Canon 1Ds, 1Ds Mk II, 5D, Kodak 14n, SLR/n, SLR/c, Leica Digitlal Modul-R and all Full Frame Sensor Cameras Sensor SwabsT are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. 1 single swab. Although these items are not officially approved by Nikon or Canon, several digital imaging site message boards have threads discussing the need for cleaning these cameras, and the success with using these products. Do so at your own risk. Read all instructions first and call us if you have questions - before proceeding. When used as directed these products are easy to use and safe and yield excellent results!	€ 5.78
Show Me!		PSI-1	PEC-PADT Lint Free Wipes 4"x4" 100per/Pkg PEC-PADs are the ideal photo wipes for those who hate photowipes! Until PEC-PADs came along, photowipes fell apart, left lint and scratched emulsions. PEC-PADs are extremely strong, lint-free and so soft and pure (99.999%) it is almost impossible to scratch an emulsion with them. PEC-PADs are so soft they can be safely used to clean all types of sensitive surfaces : scanners, CD's, mirrors, lenses, telescopes etc. When PEC-PADs are used with PEC-12, they are ideally suited for cleaning photographic film and print emulsions. PEC-PADs are available in two convenient sizes. The 4 x 4 inch (10 cm.sq.) wipes are perfect for cleaning 35mm and other small areas; the 9 x 9 inch (25 cm.sq.) wipes are best suited for larger film or print formats, murals, scanners etc. We recommend to order cleaning fluid PSI-3-F also !	€ 9.57
Show Me!		PSI-E2-F	Eclipse E2T Cleaning System Solution ECLIPSE E2T lens cleaner is the highest purity Tin Oxide CCD cleaner available, containing less than 5 parts per million (ppm) of contamination (the whitish residue left after evaporation) It dries as quickly as it can be applied leaving absolutely no residue, making it the only recommended cleaner for Tin Oxide CCD and CMOS sensor cleaning when used with Sensor Swabs. "Recommended by Sony ( USA ) for cleaning their DSLR CCD sensor when used with Sensor Swab." "E2T is guaranteed safe by Photographic Solutions. Note: E2T may be used with conventional CMOS / CCD Sensors. IMPORTANT: E2T should not be used on other critial optics.	€ 10.15
Show Me!		PSI-3-F	EclipseT Cleaning System Solution EclipseT lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be applied leaving absolutely no residue. When used with PEC-PAD photo wipes, it is possible to clean only the portion of lens which is dirty eliminating "hazy swirls". Dispense several drops onto a clean, folded PEC-PAD and lightly wipe surface in a single direction. Refold pad to expose a clean side and re-wipe as necessary. Other lens tissues may not work as well, and some experimentation may be required. Each box contains a 59 ml. (2 fl. oz.) bottle with dropper applicator. PEC-PAD's are available in 10 and 23 cm sq. (4 and 9 sq. inch) packages. Recommended by Fuji, Kodak and Leica Camera for cleaning digital CCD sensors. Used by most camera manufactureres.	€ 10.15
Show Me!		PSI-2	E-WipeT Cleaning Pad for Optics 24per/box Safe for use on monochrome CCD's, scanners, optical mirrors and other sensitive electronic and photographic image-forming surfaces when used as directed. E-wipe combines an ultra pure lint-free wipe and a precise pre-measured amount of an ultra-pure, highly refined alcohol mixture. This convenient packaging prevents over usage and contamination which can destroy an expensive component. As originally sealed, this packet contains not more than 5 parts per million of contaminants and when used, will dry instantly leaving absolutely no residue! To use, tear open a packet at notch and remove wipe. With a gentle flick of the wrist, the pad will unfold. This should be done with one hand to minimize handling. Lightly wipe across the surface to be cleaned in a single direction only. Do not go over a previously cleaned area with the same wipe, or re-use a wipe at any time, as the dirt collected can cause severe damage. Recommended by manufacturers of digital cameras, scanners and other devices with critical cleaning requirements. This product meets or exceeds SEMI standards. Not for use with Dye-On CCD chip. We recommend to order cleaning fluid PSI-3-F also !	€ 34.69
Show Me!		PSI-BO	BrushOFFT Sensor Cleaning Brush Calculating 10% discount price is Euro 46,98 Euro BrushOFF Sensor cleaning brush Features & Benefits Photographic Solutions' "BRUSHOFF" Brush is unique in the digital cleaning world. BRUSHOFFT is unlike any other sensor brush on the market. The BRUSHOFF design evolved from a NASA design and engineered to meet their rigorous requirements and specifications. It is not just an ordinary artist supply brush with a fancy name and high price tag ! Hold the BRUSHOFF and one instantly can see this is a solidly designed and built electronic tool utilizing science to produce unparalleled cleaning power ! Although the brush head is remarkably soft, the brush core is entirely electronically conductive, through an ingeniously designed grounding plug. BRUSHOFF is conductive because the dust and lint that attaches to the sensor or lens surface is attached there electronically [dust has a negative charge and the sensor/ lens a positive one]. Breaking that electronic bond is the only way to both remove the debris and discharge the sensor or lens surface so new particles are not again immediately attracted to it. A mere artist brush cannot clean all of the dust, nor can it prevent dust accumulation, even immediately after its use. To draw a parallel, the sensor surface is much like the face of a computer monitor. The dust is very hard to wipe off with a dry cloth. The result of trying is better described as "dust rearrangement" rather than "dust removal". Use BRUSHOFF prove it to yourself - a conductive brush can, if it is grounded, brush the dirt cleanly off the computer screen just as it will off your sensor. No longer attracted, the dust easily falls off. As the amount of charge (and therefore the amount of attraction) on either the sensor or the dust is unknown, using a fiber with a predetermined amount of positive charge hoping to electronically "vacuum" up the debris, may or may not remove all of the dust particles. It will remove particles when the fiber's positive charge is greater than the sensor's positive charge. The only way to always remove all of the particles clinging to the sensor is by discharging both the sensor and the particles. Then, and only then, can you be certain of having a clean sensor that electronically wants to remain clean. BRUSHOFF's unique blend of extremely fine fibers, softer than a lady's blush brush, provides not only a conductive path, but includes fibers with characteristics that make the debris want to mechanically cling to them. The debris is removed from the camera with the brush. BRUSHOFF utilizes an especially designed micro-scopically fine special filament. This fiber acts as the "vacuum" to pick up negatively charged dust from the positively charged sensor. Another feature found only on BRUSHOFF is the grounding plug which works because it provides a path to ground for the charges on both the debris and the sensor. While normally a human can briefly serve as a ground for small charges, in fact, if the human is ungrounded, the body electronically acts like a capacitor, not a ground. The human body can also be a lightening bolt to the sensor if it has a static charge. Just walking across the carpet on a dry day, a person can generate a 30,000v charge [that is what causes the spark between your finger and the doorknob]. The grounding plug insures that, regardless of any charges around it, the brush is grounded and electronically neutral. The plastic handle itself is a non-conductor which isolates the human from the brush. This allows the brush to be used in the field, away from any grounding source until one can locate a ground and discharge the BRUSHOFF. Cleaning it is also quite simple. Use a clean PECPAD & EclipseT to wipe the bristles before your first use. A moistened towelette is provided with each BRUSHOFF. Be sure your fingers do not touch any of the PAD that will come in contact with the unique and patented fibre materials. If brush should become contaminated, simple saturate a PECPAD with ECLIPSE Optic Cleaner and gently wipe bristles. Air dry for a few seconds and replace protective cap being sure cap itself has not become contaminated. To further protect the BRUSHOFF fibres, they are fully retractable into the handle when not in use and a protective cap is also supplied. Here's a great way to test the BRUSHOFF : on your TV screen or monitor, which is probably covered with dust . First, turn off the screen so you have a dark background against which to see. Then, carefully blow on a corner of the screen (using your breath rather than canned air) ..... the dust seems glued in place. Now use the Brush Off in that same corner ..... Dust is easily removed but a few bits will likely remain. Now carefully blow on those few bits. The dust is easily blown away !!!! BRUSHOFF has removed the static charge and the dust practically falls off. Imagine this effect on your CCD !!!!! Summary : designed in conjunction with and engineered to NASA specs unique blend of fibers designed to neutralize charged dust particles AND to neutralize the sensor surface to prevent further dust attraction detachable grounding cable retractable shaft to protect brush when not in use protective cap insulated handle the brush barrel is its own solid carrying case very competitively priced not just a high-priced artist brush and most importantly : backed by the company that invented sensor cleaning in 1998 - Photographic Solutions, Inc. Expertise you can count on. Remember no other company has any sensor cleaning product which is officially recommended by any camera manufacturer. We have over half a dozen, and counting ! IMPORTANT : In some cameras, the baffle is covered by a fine oily residue which is used as a lubricant. If any of the BRUSHOFF bristles come in contact with this residue, it will cause smearing on your sensor. Avoiding the baffle altogether is next to impossible. Thorough cleaning of the brush will be needed using Eclipse and Pec* Pad. If oil transfers to the sensor, from the brush, use the correct size Sensor SwabT and Eclipse to clean.	€ 52.21
Show Me!		SK1	Sensor Klear, by Lens Pen SensorKlear uses the LensPen brush and the patented cleaning compound to safely and effectively clean the sensors on digital cameras. The product is environmentally friendly and the compound will not spill or dry out. INSTRUCTIONS FOR CLEANING DIGITAL CAMERA SENSORS Raise the mirror so that you can access the sensor. Be sure to use a fresh battery and to follow the directions in the camera body manual carefully. Hold the camera firmly in your non-dominant hand and point it so that the opening on the front of the camera faces down about 15-30 degrees. Use a large rocket blower to thoroughly blow loose dust off of the sensor. Do not insert the tip of the blower past the front of the camera. Continue to hold the camera firmly as you work. Be careful not to jab the inside of the camera with the tip of the blower brush. Hold the camera, again in your non-dominant hand, about a foot (30cm) away from your body at about chest height. The opening on the front of the camera should be facing you. Do not hold the camera close to you and look down into it. Insert the tip of the SensorKlear into the chamber and place it in the center of the sensor. Begin to rub the tip of the SensorKlear back and forth on the sensor. Work from the center to the edges and then finish up by going around the edges. Repeat Step 3. If the sensor is still dirty or very dirty after your first pass with the SensorKlear, or if you have one or two stubborn dust spots that resist your best efforts, it is most likely because you have neglected cleaning your sensor for too long and the dust has become stuck to the sensor. Use approved wet cleaning method or send to manufacturer fo cleaning. IMPORTANT: Follow instructions carefully. Cleaning CCD sensors is recommended to be performed by the service centers of camera manufacturers and dealers who have skilled technicians. Many service centers have been using our LensPen products for years to clean CCD sensors. SensorKlear is a highly recommended tool for cleaning CCD sensors but Parkside Optical assumes no responsibility for any damage to the sensor during the cleaning process.	€ 9.94
Show Me!		VD-1K	Sensor Brush Kit 1.6 + 1.5 Sensors w/Spinning Device A New design 16mm Sensor BrushT and a 16mm SBF brush for 1.5x and 1.6x field-of-view magnification cameras, including all of Nikon's digital SLR cameras and Canon's EOS D30, D60, 10D, 20D and Digital Rebel/300D. The brush is roughly the vertical width of the sensor in these models. Sensor BrushT lifts and removes the dust particles away from the surface eliminating the risk of scratches. The Sensor BrushT also works like a vacuum cleaner by lifting the dust instead of misplacing it. SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations: When there are one or two spots on the sensor (used as Touch Up brush) or when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specks in these areas do not show in the final image, but cleaning will make the sensor stay clean longer. View on-line instructions at http://www.sensor-brush.com/instructions.html	€ 147.32
Show Me!		VD-1	Sensor Brush Kit 1.6 + 1.5 Sensors A New design 16mm Sensor BrushT and a 16mm SBF brush for 1.5x and 1.6x field-of-view magnification cameras, including all of Nikon's digital SLR cameras and Canon's EOS D30, D60, 10D, 20D and Digital EOS 300D, EOS 350D. The brush is roughly the vertical width of the sensor in these models. Sensor BrushT lifts and removes the dust particles away from the surface eliminating the risk of scratches. The Sensor BrushT also works like a vacuum cleaner by lifting the dust instead of misplacing it. SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations: When there are one or two spots on the sensor (used as Touch Up brush) or when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specks in these areas do not show in the final image, but cleaning will make the sensor stay clean longer. View on-line instructions at http://www.sensor-brush.com/instructions.html	€ 98.31
Show Me!		VD-2K	Sensor Brush Kit 1.3 Sensors w/Spinning Device A New design 20mm Sensor BrushT and a 20mm SBF brush for 1.3x field-of-view magnification cameras, including the Canon EOS-1D and EOS-1D Mark II. The brush is roughly the vertical width of the sensor in these models. Sensor BrushT lifts and removes the dust particles away from the surface eliminating the risk of scratches. The Sensor BrushT also works like a vacuum cleaner by lifting the dust instead of misplacing it. SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations: When there are one or two spots on the sensor (used as Touch Up brush) or when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specks in these areas do not show in the final image, but cleaning will make the sensor stay clean longer. Pro 1.3X Kit A New design 20mm Sensor BrushT and a 20mm SBF brush (Why do I need the SBF?) View on-line instructions at http://www.sensor-brush.com/instructions.html Cleaning the mirror chamber first with Chamber Clean before using a brush for the first time is MANDATORY on the Canon 1D, 1Ds, 1D Mark II and 1Ds Mark II cameras.	€ 147.32
Show Me!		VD-2	Sensor Brush Kit 1.3 Sensors A New design 20mm Sensor BrushT and a 20mm SBF brush for 1.3x field-of-view magnification cameras, including the Canon EOS-1D and EOS-1D Mark II. The brush is roughly the vertical width of the sensor in these models. Sensor BrushT lifts and removes the dust particles away from the surface eliminating the risk of scratches. The Sensor BrushT also works like a vacuum cleaner by lifting the dust instead of misplacing it. SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations: When there are one or two spots on the sensor (used as Touch Up brush) or when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specks in these areas do not show in the final image, but cleaning will make the sensor stay clean longer. Pro 1.3X Kit A New design 20mm Sensor BrushT and a 20mm SBF brush (Why do I need the SBF?) View on-line instructions at http://www.sensor-brush.com/instructions.html Cleaning the mirror chamber first with Chamber Clean before using a brush for the first time is MANDATORY on the Canon 1D, 1Ds, 1D Mark II and 1Ds Mark II cameras.	€ 108.60
Show Me!		VD-3K	Sensor Brush Kit 1.0 Sensors w/Spinning A New design 24mm Sensor BrushT and a 24mm SBF brush for digital SLR cameras whose sensors are about the same size as a 35mm film frame, including the Canon EOS-1Ds and EOS-1Ds Mark II, as well as the Kodak DCS Pro 14n, SLR/n and SLR/c. The brush is roughly the vertical width of the sensor in these models. If you own the Canon 1Ds or the Canon 1Ds Mark II it is very-highly recommended that you clean your chamber (with Chamber CleanT) before using the Sensor BrushT to avoid contaminating the brush and your sensor!!!! Sensor BrushT lifts and removes the dust particles away from the surface eliminating the risk of scratches. The Sensor BrushT also works like a vacuum cleaner by lifting the dust instead of misplacing it. SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations: When there are one or two spots on the sensor (used as Touch Up brush) or when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specs in these areas do not show in the final image, but cleaning will make the sensor stay clean longer. View on-line instructions at http://www.sensor-brush.com/instructions.html Cleaning the mirror chamber first with Chamber Clean before using a brush for the first time is MANDATORY on the Canon 1D, 1Ds, 1D Mark II and 1Ds Mark II cameras.	€ 158.92
Show Me!		VD-3	Sensor Brush Kit 1.0/Full Frame Sensors A New design 24mm Sensor BrushT and a 24mm SBF brush for digital SLR cameras whose sensors are about the same size as a 35mm film frame, including the Canon EOS-1Ds and EOS-1Ds Mark II, as well as the Kodak DCS Pro 14n, SLR/n and SLR/c. The brush is roughly the vertical width of the sensor in these models. If you own the Canon 1Ds or the Canon 1Ds Mark II it is very-highly recommended that you clean your chamber (with Chamber CleanT) before using the Sensor BrushT to avoid contaminating the brush and your sensor!!!! Sensor BrushT lifts and removes the dust particles away from the surface eliminating the risk of scratches. The Sensor BrushT also works like a vacuum cleaner by lifting the dust instead of misplacing it. SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations: When there are one or two spots on the sensor (used as Touch Up brush) or when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specs in these areas do not show in the final image, but cleaning will make the sensor stay clean longer. View on-line instructions at http://www.sensor-brush.com/instructions.html Cleaning the mirror chamber first with Chamber Clean before using a brush for the first time is MANDATORY on the Canon 1D, 1Ds, 1D Mark II and 1Ds Mark II cameras.	€ 120.04
Show Me!		VD-36	Sensor Brush 36mm (digital back) A 36mm brush for use on 16 megapixel cameras with a 36x36mm capture area. This brush can also be used for cleaning negatives. View on-line instructions at http://www.sensor-brush.com/instructions.html	€ 123.24
Show Me!		VD-40	Sensor Brush 40mm (digital back) A 40mm brush for use with 22 megapixel cameras with a 40x50mm capture area. This brush can also be used for cleaning negatives. View on-line instructions at http://www.sensor-brush.com/instructions.html	€ 134.91
Show Me!		VD-SD-1	Sensor Brush Spinning Device Self-Cleaning & Self-Charging Spinning Device (SD) For Sensor Brush VD-1 Due to problems related to liquid in canned air and flight restrictions we have developed a spinning device for the different Sensor Brush™ sizes which eliminates the requirement for canned air. Colors may vary at time of shipment Brush easily inserted into adapter and removed from adapter for swift cleaning (brush sold separately) Requires 2 "AAA" batteries (not included) WARNING: do not spin while on sensor	€ 38.85
Show Me!		VD-SD-3	Sensor Brush Spinning Device for VD-3 Self-Cleaning & Self-Charging Spinning Device (SD) For Sensor Brush VD-3 Due to problems related to liquid in canned air and flight restrictions we have developed a spinning device for the different Sensor Brush™ sizes which eliminates the requirement for canned air. Colors may vary at time of shipment Brush easily inserted into adapter and removed from adapter for swift cleaning (brush sold separately) Requires 2 "AAA" batteries (not included) WARNING: do not spin while on sensor	€ 38.85
Show Me!		VD-SD-3N	Sensor Brush Spinning Device for VD-3 (New Style) Self-Cleaning & Self-Charging Spinning Device (SD) For Sensor Brush Due to problems related to liquid in canned air and flight restrictions we have developed a spinning device for the different Sensor Brush™ sizes which eliminates the requirement for canned air. Colors may vary at time of shipment Brush easily inserted into adapter and removed from adapter for swift cleaning (brush sold separately) Requires 2 "AAA" batteries (not included) WARNING: do not spin while on sensor	€ 38.85
Show Me!		VD-SD-P	Sensor Brush Spinning Device Adapter Sensor Brush Spinning Device Adapter for VD-1 1.6x Sensor Brush. Purple Adapter for Visible Dust VD-2 1.3x Sensor Brush .	€ 14.96
Show Me!		VD-SD-B	Sensor Brush Spinning Device Adapter Sensor Brush Spinning Device Adapter for VD-2 1.3x Sensor Brush. Blue Adapter for Visible Dust VD-2 1.3x Sensor Brush .	€ 14.96
Show Me!		VD-SD-O	Sensor Brush Spinning Device Adapter Sensor Brush Spinning Device Adapter for SBF ( touch up brush ) . Orange Adapter for Visible Dust SBF.	€ 14.96
Show Me!		VD-SD-Y	Sensor Brush Spinning Device Adapter Sensor Brush Spinning Device Adapter for Full Format Brush. Yellow Adapter for Visible Dust VD-3 Full Format Brush . This Adapter is for the new style VD-3 with silver coloured metall holding the brush.	€ 14.96
Show Me!		VD-SD-G	Sensor Brush Spinning Device Adapter Sensor Brush Spinning Device Adapter for 8mm Brush. Green Adapter for Visible Dust VD-8 8mm Chamber Brush .	€ 14.96
Show Me!		VD-SD-2	Sensor Brush Spinning Device for VD-2 Self-Cleaning & Self-Charging Spinning Device (SD) For Sensor Brush VD-2 Due to problems related to liquid in canned air and flight restrictions we have developed a spinning device for the different Sensor Brush™ sizes which eliminates the requirement for canned air. Colors may vary at time of shipment Brush easily inserted into adapter and removed from adapter for swift cleaning (brush sold separately) Requires 2 "AAA" batteries (not included) WARNING: do not spin while on sensor	€ 38.85
Show Me!		VD-SC	Sensor Clean Kit Some dust may not be removable with Sensor BrushT and is probably a liquid spot. In this case you should remove the spot using the wet cleaning method (Sensor CleanT). You may also use Chamber CleanT for better preventive maintenance. Based on our research cleaning your chamber will prolong the cleanliness of the sensor by up to 90%. Sensor Clean™ is specifically formulated to have the following advantages over Methanol and Alcohol. To prevent dust build up To have strong cleaning property To remove static and static build up To be compatible with other applicators To leave no organic residue or film Non-alcoholic Non-Hygroscopic Non-flammable Non-toxic Non-corrosive to the sensor Streak Free Travel Safe View on-line instructions at http://www.sensor-brush.com/instructions.html	€ 33.94
Show Me!		VD-CC	Chamber Clean Kit Some dust may not be removable with Sensor BrushT and is probably a liquid spot. In this case you should remove the spot using the wet cleaning method (Sensor CleanT). You may also use Chamber CleanT for better preventive maintenance. Based on our research cleaning your chamber will prolong the cleanliness of the sensor by up to 90%. Chamber Clean™ is specifically formulated to have the following properties: Antistatic - to prevent dust accumulation Coating - to act as a barrier Cleaning - to remove stubborn flecks, mirror dust and fabrics Lubricant - to reduce flecks by reducing friction Chamber Clean™ solution is filtered to less than 0.2 micron, 40 times smaller than an 8 micron pixel size. Visible Dust does not recommend using other cleaning solutions, which may contaminate the sensor. View on-line instructions at http://www.sensor-brush.com/instructions.html	€ 26.25
Show Me!		VD-SC-CC	Sensor Clean & Chamber Clean Kit Save by ordering both of these products together. Some dust may not be removable with Sensor BrushT and is probably a liquid spot. In this case you should remove the spot using the wet cleaning method (Sensor CleanT). You may also use Chamber CleanT for better preventive maintenance. Based on our research cleaning your chamber will prolong the cleanliness of the sensor by up to 90%. NEVER ATTEMPT TO CLEAN YOUR CHAMBER WITH MICROFIBRE CLOTH OR COTTON SWABS. These materials will tear and leave more behind.	€ 48.90
Show Me!		53108	Anti Static Gloves (Size LG) PowerCleanT Anti-Static Gloves Breathable Polyester with conductive Carbon fibers woven in. Available in sizes: L, XL Safely handle film, cameras, electronics Added protection when cleaning the sensor on DSLR's Clean Room and Assembly area ready Charge Decay: <0.1 Seconds Surface Resistivity: <108 Reuseable - washable Sensitive electronics are easily ruined by static discharge. Can you risk loosing data and your equipment to a stray charge when handling film and plastics? Probably not, so slip on these comfortable and reliable static dissipation gloves and work effortlessly. Keep an extra pair in your gadget bag and one set in with your test equipment. Effectiveness is observed through 10-12 washings.	€ 9.35
Show Me!		53116	Anti Static Gloves (size XL) PowerCleanT Anti-Static Gloves Breathable Polyester with conductive Carbon fibers woven in. Available in sizes: L, XL Safely handle film, cameras, electronics Added protection when cleaning the sensor on DSLR's Clean Room and Assembly area ready Charge Decay: <0.1 Seconds Surface Resistivity: <108 Reuseable - washable Sensitive electronics are easily ruined by static discharge. Can you risk loosing data and your equipment to a stray charge when handling film and plastics? Probably not, so slip on these comfortable and reliable static dissipation gloves and work effortlessly. Keep an extra pair in your gadget bag and one set in with your test equipment. Effectiveness is observed through 10-12 washings.	€ 9.35
Show Me!		3862E	Gepe Extreeme Card Safe Extreme Memory Card Protector Holds 4 Memory Cards Holds CompactFlash, MMC/SD, MemoryStick & SmartMedia Crushproof Case Shock Resistant Waterproof Antistatic Viewing Window Floats	€ 24.16
Show Me!		36876-10	Low Lint Cotton Tip Applicator, 6" 10/2 Low Lint Cotton Tip Applicator, 6 inch. 10 Packs of 2 Pieces. For larger quantities order part no 36876 .	€ 1.45
Show Me!		36815-10	Polyester Tipped Applicator, 6" 10/2 Polyester Tipped Applicator, 6" Sterile. 10 Packs of 2 Pieces. For larger quantities order part no 36815 .	€ 2.26
Show Me!		36815	Polyester Tipped Applicator, 6" 100/2 Polyester Tipped Applicator, 6" Sterile. 100 Packs of 2 Pieces. For smaller quantities order part no 36815-10 .	€ 15.02
Show Me!		LW2000W	Flashlight, LED 3 "AA" cell White 14 DAYS+ CONTINUOUS LIGHT -- That's all day..all night..all day....On 3 plain alkaline AA batteries (That's 336 Hours!) . Visible for over a mile. . Easy Twist head for on and off. . Comes with wrist strap. . Dimensions: 7 inches by 1 inch. 1.25 inch at head.	€ 42.98
Show Me!		LP-77	DigiKlear Cleaning System for Digital Cameras (LensPen) DigiKlearT Cleaning system for digital camera lenses & LCD's. Also used by many including Canon to "Polish Off" the low pass filters. Designed for Digital and Video camera lenses and LCD screens. Uses a non-liquid cleaning compound. Safe for all lenses and screens	€ 11.77
Show Me!		MP1	Lens Pen, Mini-Pro Lens Pen, Mini-Pro High-Tech Cleaning For Camera, Camcorder & Binocular Lenses! LensPen Mini-Pro's all natural chamois tip is impregnated with a revolutionary non-liquid cleaning compound that absorbs oily residues and contaminants safer, easier and more-effectively than by any other method.	€ 12.29
Show Me!		ELP-505-00	Optivisor 2.5X at 8" OptiVisor is a precision binocular headband magnifier which permits unrestricted user efficiency while reducing eye strain - leaves both hands free and allows three dimensional vision - Used by anyone whose profession or craft requires close accurate work - Can be worn over prescription or safety eyeglasses. Optivisor is equipped with these unique features Optical Glass Prismatic Lenses - Ground and polished to precision optical standards - bevel edged and mounted in interchangeable plastic frame. It tilts - Adjustable pivots allow the visor to be tilted out of the way when not needed and at your fingertips when you need magnification. Adjustable Headband - Conforms to fit all head sizes - fabricated from a special blend of lightweight material - comfortable when worn for long periods of time. High Impact visor - Provides a tough, durable, always new appearance. Genuine Leather Comfort Band - Padded with orthopedic felt adds to comfort. Special Optiloupe attachment also available for extra power. Other magnifications and replacement lenses available by special order.	€ 45.65
Show Me!		PAN-350	PanaVise, Multi-Purpose Work Center This is one of our most versatile combinations, perfect for holding a camera or hobby needs. We start with a PAN-376 Self-Centering Extra-Wide Opening Head which is recommended for holding heavier objects but which can be used to hold delicate ones, too. We include the PAN-300 Standard Base with its single knob for "tilt, turn and rotate control," and finish off with the PAN-312 Parts Tray Base Mount. This is an economical and convenient combination - you'll find a million and one uses for it! The PAN-350 Multi-Purpose Work Center stands 7 7/8" (20cm) tall and weighs 5 lbs. (2.3kg). For electronics buffs, a PAN-371 Solder Station can be added for increased versatility.	€ 122.90

SPECIAL OFFER - Save 10% on all

orders over € 50

Digital Camera Cleaning Supplies

Micro-Tools Europe
Your Audio-Visual, Photographic and Video Repair, Tool Source.

Picture

Add
To
Basket

Part #

Description

Price
Includes
MwSt. ( VAT )

Show Me!

AA1900

Blower, Giottos Rocket-Air 190mm
- Natural and environmentally-friendly rubber
- Air inlet valve design prevents backflow from air tube
- Detachable directable super air stream air tube
- Unique rocket base design provides standing function, convenient use and storage
- The Giottos Rocket-Air can blow off dust particles, even those clinging to camera CCDs due to static electricity
- Handy neck strap for easy carrying
- Easy maintenance

This Giotto is far superior to the typical blower brushes included in most cleaning kits!!!

€ 9.48

Show Me!

36876

Low Lint Cotton Tip Applicator, 6" 10/2
Low Lint Cotton Tip Applicator, 6 inch.
100 Packs of 2 Pieces.
For smaller quantities order part no 36876-10 .

€ 11.60

Show Me!

VD-AB-700

Visible Dust Arctic Butterflyr SL700
Visible Dust Arctic Butterflyr SL700 Sensor Brush is an entry DSLR sensor cleaning tool for more budget orientated consumers. The Arctic Butterflyr SL700 Sensor Brush is compact and can be easily fitted into the photographer's pocket. It uses one AAA battery and has a lower spinning speed compared to the Arctic Butterflyr 724 Sensor Brush. It does not have interchangeable head with HDF( High Density Fiber) as Arctic Butterflyr 724 Sensor Brush does. It comes in one size and can be used in all DSLR sensor's for removing dust and fibers.
Please take into regard the 10% discount at the checkout for orders above 50.- Euro.

€ 72.96

Show Me!

VD-AB-724

Sensor Brush Artic Butterfly 724

Sensor Brush Artic Butterfly 724

Ideal for Travel and for Light Dusting of sensor. The Arctic ButterflyT does not replace regular Sensor BrushT which has more filaments and is better suited for heavier dusting (colour may vary at time of shipment). Includes an elegant carry case for added protection and class. Requires two AAA batteries (not included).

Redesigned to Include:

30% more powerful motor
Durable plastic body
Protective twist-off cap
Snap-on battery cover
On/Off Switch Design
Soft Contoured Grip
Durable carry case

Please take into regard the 10% discount at the checkout for orders above 50.- Euro.

€ 109.96

Show Me!

VD-FSS

Visible Dust Focusing Screen SwabT
Tailored for those hard to remove spots off of your focusing screen the Focusing Screen SwabT will, with the help of Visible Dust's fine array of liquids, remove any undesirable contamination. With its specially designed 45 degree angle swab head, the Focusing Screen SwabT fits into any DSLR to clear your sights through your viewfinder.

€ 35.96

Show Me!

VD-SL

Visible Dust Sensor LoupeT 5X
Visible Dust Sensor LoupeT utilizes advanced (patent pending) features such as BriteVue XLT technology with high optical magnification and 6 super bright LEDs. The Sensor LoupeT is the only tool you need for locating debris on your sensor. The high quality optical glass is coated with MgF2 to reduce chromatic aberrations and to seal the lens so that no mildew buildup occurs. The high caliber materials used in construction of the Sensor LoupeT provide a high resolution, crystal clear image of the sensor. The BriteVue XLT design aids to easily spot dust on the sensor, succeeding where other tools fail.
Please take into regard the 10% discount at the checkout for orders above 50.- Euro.

€ 94.95

Show Me!

VD-SL-BV

Visible Dust BriteVue Sensor LoupeT 7X

The BriteVue Sensor LoupeT 7X is designed to provide a more in depth view of the sensor and chamber area. It has the ability to reveal the smallest dust particles and any other contaminants on the sensor. Utilizing advanced (patent pending) features such as BriteVue technology with high optical magnification and 6 super bright LEDs, the SensorLoupeT 7X is the only tool you need for locating debris on your sensor.

The high quality optical glass is coated with MgF2 to reduce chromatic aberrations and to seal the lens so that no mildew buildup occurs. The high caliber materials used in construction of the SensorLoupeT provide a high resolution, distortion free, crystal clear image of the sensor. The BriteVue design aids to easily spot dust on the sensor, succeeding where other tools fail. The angled configuration of the 6 intensely lit LEDs, similar to that used in satellite imaging, provides a three dimensional image of the debris as opposed to linear lights of ordinary Loupes on the market.

Other features include:

compact design
easy on/off switch
high grade materials
easy access to clean lens
neck strap
synthetic leather carrying case with belt clip

The SensorLoupeT 7X from Visible Dust makes it easier then ever before in locating even the smallest dust speck without resorting to time consuming inspection through a computer monitor.

Please take into regard the 10% discount at the checkout for orders above 50.- Euro.

€ 104.96

Show Me!

CS-50

Chamber SwabT 50 Pack
Chamber SwabT is one of the very few true "PREVENTATIVE" products available for purchase today for assistance in preventing dust from reaching your sensor. The foamed tipped Chamber SwabT with a couple drops of EclipseT (or equivalent) will help remove the stray dust and excess lubricants from the walls of the mirror cage/chamber. By cleaning the chamber walls, you will reduce the chance of contaminating your sensor cleaning brush and help stop those unwanted critters from falling onto your sensor.

We recommend cleaning the walls of your mirror chamber before every sensor cleaning. It is simple, quick to accomplish and very inexpensive.

The Chamber SwabsT comes packaged in a heavy duty 6 mil resealable zipper bag for protection and storage while traveling. Also included is a set of printed instructions.

www.TheDustPatrol.com

€ 12.95

Show Me!

D-SLR-16

D-SLR BrushT - Sensor Cleaning Brush 16

For 1.5x and 1.6x field-of-view magnification cameras, including
Nikon D1/h/x, D100, D70, D50, D40, D200, D2H, D2Hs, D2X
Canon D30 & D60, Canon 10D/20D/30D, Rebel XTi, XT / 350D, Rebel 300D
Sony/Konica/Minolta 7D, 5D & Alpha
Olympus E Series
Contax N Digital
Pentax *ist D, *ist DS, K110D, K100D, K10D
Sigma GX-1S, SD9 and SD10

The D-SLR BrushT is a high quality, fine bristled/fiber sensor cleaning brush from Germany. The nylon bristles of the D-SLR BrushT are statically charged by blowing air through them. This not only charges the brush but it helps dislodge and remove any previously captured dust particles still in the brush. With a freshly charged brush, you whisk ever so lightly across the sensor, the charge on the bristles attracts the dust from the sensor onto the bristles leaving you with a clean sensor.

No sensor cleaning brush will totally eliminate the need for the wet method of sensor cleaning, but with the D-SLR BrushT you won't have to use the wet method as often, saving you time, products and money.

The D-SLR BrushT kit comes complete with:
1 D-SLR BrushT &
3 ChamberSwabsT
packaged inside of a polyurethane tube for protection and storage while traveling. This kit also comes with printed instructions, all of this inside a resealable, hangable 2 mil plastic bag.

www.TheDustPatrol.com

€ 24.95

Show Me!

D-SLR-13

D-SLR-13- D-SLR BrushT - Sensor Cleaning

For 1.3x field-of-view magnification cameras, including
Kodak DCS
Fuji S1, S2 & S3
Canon 1D, 1-D Mark II
Sigma SD-10 / Foveon X3

www.TheDustPatrol.com

€ 24.95

Show Me!

D-SLR-10

D-SLR BrushT - Sensor Cleaning Brush 10

For 35mm full frame, including
Canon 1Ds, EOS 5D Full Frame Sensor
Kodak 14n, SLR/n, SLR/c
Leica Digital Modul-R

www.TheDustPatrol.com

€ 24.95

Show Me!

CS-10

Chamber SwabT 10 Pack
Chamber SwabT is one of the very few true "PREVENTATIVE" products available for purchase today for assistance in preventing dust from reaching your sensor. The foamed tipped Chamber SwabT with a couple drops of EclipseT (or equivalent) will help remove the stray dust and excess lubricants from the walls of the mirror cage/chamber. By cleaning the chamber walls, you will reduce the chance of contaminating your sensor cleaning brush and help stop those unwanted critters from falling onto your sensor.

We recommend cleaning the walls of your mirror chamber before every sensor cleaning. It is simple, quick to accomplish and very inexpensive.

The Chamber SwabsT comes packaged in a heavy duty 6 mil resealable zipper bag for protection and storage while traveling. Also included is a set of printed instructions.

www.TheDustPatrol.com

€ 2.86

Show Me!

SW1

SensorWandT, 14mm for cleaning digital c
Sensor WandsT are used in conjunction with EclipseT Cleaning Solution (part # PSI-3-F) and PEC-PADs (part # PSI-1) to clean SLR Digital Cameras. Use The list below to make sure you choose the correct size.

14mm for Nikon D1/h/x, D100,D70, D2H Canon D30 & D60, Canon 10-D, 20-D, 300D,Pentax *ist D, Olympus E-10
16mm for Kodak DCS, Fuji S1 & S2, Canon 1D, 1-D Mark II
18mm for Kodak 14n and Canon 1Ds Full Frame Sensor

€ 6.66

Show Me!

SW2

SensorWandT, 16mm for cleaning digital c
Sensor WandsT are used in conjunction with EclipseT Cleaning Solution (part # PSI-3-F) and PEC-PADs (part # PSI-1) to clean SLR Digital Cameras. Use The list below to make sure you choose the correct size.

14mm for Nikon D1/h/x, D100,D70, D2H Canon D30 & D60, Canon 10-D, Rebel 300D,Pentax *ist D
16mm for Kodak DCS, Fuji S1 & S2, Canon 1D, 1-D Mark II
18mm for Kodak 14n and Canon 1Ds Full Frame Sensor

€ 6.66

Show Me!

SW3

SensorWandT, 18mm for cleaning digital c
Sensor WandsT are used in conjunction with EclipseT Cleaning Solution (part # PSI-3-F) and PEC-PADs (part # PSI-1) to clean SLR Digital Cameras. Use The list below to make sure you choose the correct size.

€ 6.66

Show Me!

PSI-4

Sensor SwabT Cleans Digital Image Chips (Box of 12)
For Kodak DCS, Fuji S1, S2 & S3, Canon 1D, 1-D Mark II, Sigma SD10 & Foveon X3
Sensor Swabs are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity. 12 swabs per box Recommended by EASTMAN KODAK COMPANY for cleaning the DCS family of digital cameras when used with EclipseT Optic Cleaner (sold separately). Sensor Swabs are also ideal for cleaning other recessed imaging surfaces. FUJI recommends Eclipse and Sensor Swabs for cleaning their S1 Digital Pro Camera! "Sensor SwabT is recommended by LEICA CAMERA AG for cleaning the LEICA S1 CCD chip." (when used without liquid)
We recommend to order cleaning fluid PSI-3-F also !

€ 63.75

Show Me!

PSI-4-1

Sensor SwabT CCD Cleaner (Pkg of 1)
For Kodak DCS, Fuji S1, S2 & S3, Canon 1D, 1-D Mark II, Sigma SD10 & Foveon X3
Sensor Swabs are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity.
1 single swab.
Recommended by EASTMAN KODAK COMPANY for cleaning the DCS family of digital cameras when used with EclipseT Optic Cleaner (sold separately). Sensor Swabs are also ideal for cleaning other recessed imaging surfaces. FUJI recommends Eclipse and Sensor Swabs for cleaning their S1 Digital Pro Camera! "Sensor SwabT is recommended by LEICA CAMERA AG for cleaning the LEICA S1 CCD chip." (when used without liquid)
We recommend to order cleaning fluid PSI-3-F also !

€ 5.78

Show Me!

PSI-5

Sensor SwabT for Nikon & Canon digital cameras (Box of 12)
These Sensor Swabs are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces on Digital cameras.
For Nikon D1/h/x, D100,D70, D50, D200, D2H, D2Hs, D2X, Canon EOS D30, D60, 10-D, 20-D, 300D, EOS 350D, KonicaMinolta 5D, 7D, Olympus E1, Pentax *ist D, *ist DS
Clean room manufactured and sealed, these swabs are the ultimate in purity. 12 swabs per box
We recommend to order cleaning fluid PSI-3-F also !

€ 63.75

Show Me!

PSI-5-1

Sensor SwabT for Nikon & Can (Pkg of 1)
These Sensor Swabs are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces on Digital cameras.
1 single swab.
For Nikon D1/h/x, D100,D70, D50, D200, D2H, D2Hs, D2X, Canon EOS D30, D60, 10-D, 20-D, 300D, EOS 350D, KonicaMinolta 5D, 7D, Olympus E1, Pentax *ist D, *ist DS
Clean room manufactured and sealed, these swabs are the ultimate in purity. 1 swab
We recommend to order cleaning fluid PSI-3-F also !

€ 5.78

Show Me!

PSI-6

Sensor SwabT for Full Frame (Box of 12)
For Canon 1Ds, 1Ds Mk II, 5D, Kodak 14n, SLR/n, SLR/c, Leica Digitlal Modul-R and all Full Frame Sensor

Sensor SwabsT are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity.

Although these items are not officially approved by Nikon or Canon, several digital imaging site message boards have threads discussing the need for cleaning these cameras, and the success with using these products. Do so at your own risk. Read all instructions first and call us if you have questions - before proceeding. When used as directed these products are easy to use and safe and yield excellent results!

€ 63.75

Show Me!

PSI-6-1

Sensor SwabT for Full Frame (Pkg of 1)
For Canon 1Ds, 1Ds Mk II, 5D, Kodak 14n, SLR/n, SLR/c, Leica Digitlal Modul-R and all Full Frame Sensor Cameras

Sensor SwabsT are designed for cleaning CCD chips and other delicate or hard to reach optical and imaging surfaces. Clean room manufactured and sealed, these swabs are the ultimate in purity.

1 single swab.
Although these items are not officially approved by Nikon or Canon, several digital imaging site message boards have threads discussing the need for cleaning these cameras, and the success with using these products. Do so at your own risk. Read all instructions first and call us if you have questions - before proceeding. When used as directed these products are easy to use and safe and yield excellent results!

€ 5.78

Show Me!

PSI-1

PEC-PADT Lint Free Wipes 4"x4" 100per/Pkg
PEC-PADs are the ideal photo wipes for those who hate photowipes! Until PEC-PADs came along, photowipes fell apart, left lint and scratched emulsions. PEC-PADs are extremely strong, lint-free and so soft and pure (99.999%) it is almost impossible to scratch an emulsion with them. PEC-PADs are so soft they can be safely used to clean all types of sensitive surfaces : scanners, CD's, mirrors, lenses, telescopes etc. When PEC-PADs are used with PEC-12, they are ideally suited for cleaning photographic film and print emulsions. PEC-PADs are available in two convenient sizes. The 4 x 4 inch (10 cm.sq.) wipes are perfect for cleaning 35mm and other small areas; the 9 x 9 inch (25 cm.sq.) wipes are best suited for larger film or print formats, murals, scanners etc.
We recommend to order cleaning fluid PSI-3-F also !

€ 9.57

Show Me!

PSI-E2-F

Eclipse E2T Cleaning System Solution

ECLIPSE E2T lens cleaner is the highest purity Tin Oxide CCD cleaner available, containing less than 5 parts per million (ppm) of contamination (the whitish residue left after evaporation) It dries as quickly as it can be applied leaving absolutely no residue, making it the only recommended cleaner for Tin Oxide CCD and CMOS sensor cleaning when used with Sensor Swabs.

"Recommended by Sony ( USA ) for cleaning their DSLR CCD sensor when used with Sensor Swab."
"E2T is guaranteed safe by Photographic Solutions.

Note: E2T may be used with conventional CMOS / CCD Sensors.

IMPORTANT: E2T should not be used on other critial optics.

€ 10.15

Show Me!

PSI-3-F

EclipseT Cleaning System Solution
EclipseT lens cleaner is the highest purity lens cleaner available. It dries as quickly as it can be applied leaving absolutely no residue. When used with PEC-PAD photo wipes, it is possible to clean only the portion of lens which is dirty eliminating "hazy swirls". Dispense several drops onto a clean, folded PEC-PAD and lightly wipe surface in a single direction. Refold pad to expose a clean side and re-wipe as necessary. Other lens tissues may not work as well, and some experimentation may be required. Each box contains a 59 ml. (2 fl. oz.) bottle with dropper applicator. PEC-PAD's are available in 10 and 23 cm sq. (4 and 9 sq. inch) packages. Recommended by Fuji, Kodak and Leica Camera for cleaning digital CCD sensors. Used by most camera manufactureres.

€ 10.15

Show Me!

PSI-2

E-WipeT Cleaning Pad for Optics 24per/box
Safe for use on monochrome CCD's, scanners, optical mirrors and other sensitive electronic and photographic image-forming surfaces when used as directed. E-wipe combines an ultra pure lint-free wipe and a precise pre-measured amount of an ultra-pure, highly refined alcohol mixture. This convenient packaging prevents over usage and contamination which can destroy an expensive component. As originally sealed, this packet contains not more than 5 parts per million of contaminants and when used, will dry instantly leaving absolutely no residue! To use, tear open a packet at notch and remove wipe. With a gentle flick of the wrist, the pad will unfold. This should be done with one hand to minimize handling. Lightly wipe across the surface to be cleaned in a single direction only. Do not go over a previously cleaned area with the same wipe, or re-use a wipe at any time, as the dirt collected can cause severe damage. Recommended by manufacturers of digital cameras, scanners and other devices with critical cleaning requirements. This product meets or exceeds SEMI standards. Not for use with Dye-On CCD chip.
We recommend to order cleaning fluid PSI-3-F also !

€ 34.69

Show Me!

PSI-BO

BrushOFFT Sensor Cleaning Brush
Calculating 10% discount price is Euro 46,98

Euro BrushOFF Sensor cleaning brush Features & Benefits Photographic Solutions' "BRUSHOFF" Brush is unique in the digital cleaning world. BRUSHOFFT is unlike any other sensor brush on the market. The BRUSHOFF design evolved from a NASA design and engineered to meet their rigorous requirements and specifications. It is not just an ordinary artist supply brush with a fancy name and high price tag ! Hold the BRUSHOFF and one instantly can see this is a solidly designed and built electronic tool utilizing science to produce unparalleled cleaning power ! Although the brush head is remarkably soft, the brush core is entirely electronically conductive, through an ingeniously designed grounding plug. BRUSHOFF is conductive because the dust and lint that attaches to the sensor or lens surface is attached there electronically [dust has a negative charge and the sensor/ lens a positive one]. Breaking that electronic bond is the only way to both remove the debris and discharge the sensor or lens surface so new particles are not again immediately attracted to it. A mere artist brush cannot clean all of the dust, nor can it prevent dust accumulation, even immediately after its use. To draw a parallel, the sensor surface is much like the face of a computer monitor. The dust is very hard to wipe off with a dry cloth. The result of trying is better described as "dust rearrangement" rather than "dust removal". Use BRUSHOFF prove it to yourself - a conductive brush can, if it is grounded, brush the dirt cleanly off the computer screen just as it will off your sensor. No longer attracted, the dust easily falls off. As the amount of charge (and therefore the amount of attraction) on either the sensor or the dust is unknown, using a fiber with a predetermined amount of positive charge hoping to electronically "vacuum" up the debris, may or may not remove all of the dust particles. It will remove particles when the fiber's positive charge is greater than the sensor's positive charge. The only way to always remove all of the particles clinging to the sensor is by discharging both the sensor and the particles. Then, and only then, can you be certain of having a clean sensor that electronically wants to remain clean. BRUSHOFF's unique blend of extremely fine fibers, softer than a lady's blush brush, provides not only a conductive path, but includes fibers with characteristics that make the debris want to mechanically cling to them. The debris is removed from the camera with the brush. BRUSHOFF utilizes an especially designed micro-scopically fine special filament. This fiber acts as the "vacuum" to pick up negatively charged dust from the positively charged sensor. Another feature found only on BRUSHOFF is the grounding plug which works because it provides a path to ground for the charges on both the debris and the sensor. While normally a human can briefly serve as a ground for small charges, in fact, if the human is ungrounded, the body electronically acts like a capacitor, not a ground. The human body can also be a lightening bolt to the sensor if it has a static charge. Just walking across the carpet on a dry day, a person can generate a 30,000v charge [that is what causes the spark between your finger and the doorknob]. The grounding plug insures that, regardless of any charges around it, the brush is grounded and electronically neutral. The plastic handle itself is a non-conductor which isolates the human from the brush. This allows the brush to be used in the field, away from any grounding source until one can locate a ground and discharge the BRUSHOFF. Cleaning it is also quite simple. Use a clean PEC*PAD & EclipseT to wipe the bristles before your first use. A moistened towelette is provided with each BRUSHOFF. Be sure your fingers do not touch any of the PAD that will come in contact with the unique and patented fibre materials. If brush should become contaminated, simple saturate a PEC*PAD with ECLIPSE Optic Cleaner and gently wipe bristles. Air dry for a few seconds and replace protective cap being sure cap itself has not become contaminated. To further protect the BRUSHOFF fibres, they are fully retractable into the handle when not in use and a protective cap is also supplied. Here's a great way to test the BRUSHOFF : on your TV screen or monitor, which is probably covered with dust . First, turn off the screen so you have a dark background against which to see. Then, carefully blow on a corner of the screen (using your breath rather than canned air) ..... the dust seems glued in place. Now use the Brush Off in that same corner ..... Dust is easily removed but a few bits will likely remain. Now carefully blow on those few bits. The dust is easily blown away !!!! BRUSHOFF has removed the static charge and the dust practically falls off. Imagine this effect on your CCD !!!!! Summary : designed in conjunction with and engineered to NASA specs unique blend of fibers designed to neutralize charged dust particles AND to neutralize the sensor surface to prevent further dust attraction detachable grounding cable retractable shaft to protect brush when not in use protective cap insulated handle the brush barrel is its own solid carrying case very competitively priced not just a high-priced artist brush and most importantly : backed by the company that invented sensor cleaning in 1998 - Photographic Solutions, Inc. Expertise you can count on. Remember no other company has any sensor cleaning product which is officially recommended by any camera manufacturer. We have over half a dozen, and counting ! IMPORTANT : In some cameras, the baffle is covered by a fine oily residue which is used as a lubricant. If any of the BRUSHOFF bristles come in contact with this residue, it will cause smearing on your sensor. Avoiding the baffle altogether is next to impossible. Thorough cleaning of the brush will be needed using Eclipse and Pec* Pad. If oil transfers to the sensor, from the brush, use the correct size Sensor SwabT and Eclipse to clean.

€ 52.21

Show Me!

SK1

Sensor Klear, by Lens Pen

SensorKlear uses the LensPen brush and the patented cleaning compound to safely and effectively clean the sensors on digital cameras. The product is environmentally friendly and the compound will not spill or dry out.

INSTRUCTIONS FOR CLEANING DIGITAL CAMERA SENSORS

Raise the mirror so that you can access the sensor. Be sure to use a fresh battery and to follow the directions in the camera body manual carefully.
Hold the camera firmly in your non-dominant hand and point it so that the opening on the front of the camera faces down about 15-30 degrees.
Use a large rocket blower to thoroughly blow loose dust off of the sensor. Do not insert the tip of the blower past the front of the camera. Continue to hold the camera firmly as you work. Be careful not to jab the inside of the camera with the tip of the blower brush.
Hold the camera, again in your non-dominant hand, about a foot (30cm) away from your body at about chest height. The opening on the front of the camera should be facing you. Do not hold the camera close to you and look down into it.
Insert the tip of the SensorKlear into the chamber and place it in the center of the sensor. Begin to rub the tip of the SensorKlear back and forth on the sensor. Work from the center to the edges and then finish up by going around the edges.
Repeat Step 3.
If the sensor is still dirty or very dirty after your first pass with the SensorKlear, or if you have one or two stubborn dust spots that resist your best efforts, it is most likely because you have neglected cleaning your sensor for too long and the dust has become stuck to the sensor. Use approved wet cleaning method or send to manufacturer fo cleaning.
IMPORTANT: Follow instructions carefully. Cleaning CCD sensors is recommended to be performed by the service centers of camera manufacturers and dealers who have skilled technicians. Many service centers have been using our LensPen products for years to clean CCD sensors. SensorKlear is a highly recommended tool for cleaning CCD sensors but Parkside Optical assumes no responsibility for any damage to the sensor during the cleaning process.

€ 9.94

Show Me!

VD-1K

Sensor Brush Kit 1.6 + 1.5 Sensors w/Spinning Device
A New design 16mm Sensor BrushT and a 16mm SBF brush for 1.5x and 1.6x field-of-view magnification cameras, including all of Nikon's digital SLR cameras and Canon's EOS D30, D60, 10D, 20D and Digital Rebel/300D. The brush is roughly the vertical width of the sensor in these models.

Sensor BrushT lifts and removes the dust particles away from the surface eliminating the risk of scratches. The Sensor BrushT also works like a vacuum cleaner by lifting the dust instead of misplacing it.

SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations:

When there are one or two spots on the sensor (used as Touch Up brush) or
when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or
more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specks in these areas do not show in the final image, but cleaning will make the sensor stay clean longer.

View on-line instructions at http://www.sensor-brush.com/instructions.html

€ 147.32

Show Me!

VD-1

Sensor Brush Kit 1.6 + 1.5 Sensors
A New design 16mm Sensor BrushT and a 16mm SBF brush for 1.5x and 1.6x field-of-view magnification cameras, including all of Nikon's digital SLR cameras and Canon's EOS D30, D60, 10D, 20D and Digital EOS 300D, EOS 350D. The brush is roughly the vertical width of the sensor in these models.

SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations:

When there are one or two spots on the sensor (used as Touch Up brush) or
when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or
more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specks in these areas do not show in the final image, but cleaning will make the sensor stay clean longer.

View on-line instructions at http://www.sensor-brush.com/instructions.html

€ 98.31

Show Me!

VD-2K

Sensor Brush Kit 1.3 Sensors w/Spinning Device
A New design 20mm Sensor BrushT and a 20mm SBF brush for 1.3x field-of-view magnification cameras, including the Canon EOS-1D and EOS-1D Mark II. The brush is roughly the vertical width of the sensor in these models.

SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations:

When there are one or two spots on the sensor (used as Touch Up brush) or
when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or
more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specks in these areas do not show in the final image, but cleaning will make the sensor stay clean longer.

Pro 1.3X Kit

A New design 20mm Sensor BrushT and a 20mm SBF brush (Why do I need the SBF?)

View on-line instructions at http://www.sensor-brush.com/instructions.html

Cleaning the mirror chamber first with Chamber Clean before using a brush for the first time is MANDATORY on the Canon 1D, 1Ds, 1D Mark II and 1Ds Mark II cameras.

€ 147.32

Show Me!

VD-2

Sensor Brush Kit 1.3 Sensors
A New design 20mm Sensor BrushT and a 20mm SBF brush for 1.3x field-of-view magnification cameras, including the Canon EOS-1D and EOS-1D Mark II. The brush is roughly the vertical width of the sensor in these models.

SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations:

When there are one or two spots on the sensor (used as Touch Up brush) or
when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or
more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specks in these areas do not show in the final image, but cleaning will make the sensor stay clean longer.

Pro 1.3X Kit

A New design 20mm Sensor BrushT and a 20mm SBF brush (Why do I need the SBF?)

View on-line instructions at http://www.sensor-brush.com/instructions.html

Cleaning the mirror chamber first with Chamber Clean before using a brush for the first time is MANDATORY on the Canon 1D, 1Ds, 1D Mark II and 1Ds Mark II cameras.

€ 108.60

Show Me!

VD-3K

Sensor Brush Kit 1.0 Sensors w/Spinning
A New design 24mm Sensor BrushT and a 24mm SBF brush for digital SLR cameras whose sensors are about the same size as a 35mm film frame, including the Canon EOS-1Ds and EOS-1Ds Mark II, as well as the Kodak DCS Pro 14n, SLR/n and SLR/c. The brush is roughly the vertical width of the sensor in these models.

If you own the Canon 1Ds or the Canon 1Ds Mark II it is very-highly recommended that you clean your chamber (with Chamber CleanT) before using the Sensor BrushT to avoid contaminating the brush and your sensor!!!!

SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations:

When there are one or two spots on the sensor (used as Touch Up brush) or
when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or
more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specs in these areas do not show in the final image, but cleaning will make the sensor stay clean longer.

View on-line instructions at http://www.sensor-brush.com/instructions.html

Cleaning the mirror chamber first with Chamber Clean before using a brush for the first time is MANDATORY on the Canon 1D, 1Ds, 1D Mark II and 1Ds Mark II cameras.

€ 158.92

Show Me!

VD-3

Sensor Brush Kit 1.0/Full Frame Sensors
A New design 24mm Sensor BrushT and a 24mm SBF brush for digital SLR cameras whose sensors are about the same size as a 35mm film frame, including the Canon EOS-1Ds and EOS-1Ds Mark II, as well as the Kodak DCS Pro 14n, SLR/n and SLR/c. The brush is roughly the vertical width of the sensor in these models.

SBF or (sensor brush fan style) has a single row of filament that is thinner and lighter than regular Sensor Brush". It is used in the following situations:

When there are one or two spots on the sensor (used as Touch Up brush) or
when the canned air is not accessible, so the SBF can be charged with a simple bulb blower or
more importantly, is used on the Mirror and Focusing optics. As it is easier and has thinner handle to safely remove all the specs from these areas. Although the specs in these areas do not show in the final image, but cleaning will make the sensor stay clean longer.

View on-line instructions at http://www.sensor-brush.com/instructions.html

Cleaning the mirror chamber first with Chamber Clean before using a brush for the first time is MANDATORY on the Canon 1D, 1Ds, 1D Mark II and 1Ds Mark II cameras.

€ 120.04

Show Me!

VD-36

Sensor Brush 36mm (digital back)
A 36mm brush for use on 16 megapixel cameras with a 36x36mm capture area. This brush can also be used for cleaning negatives.

View on-line instructions at http://www.sensor-brush.com/instructions.html

€ 123.24

Show Me!

VD-40

Sensor Brush 40mm (digital back)
A 40mm brush for use with 22 megapixel cameras with a 40x50mm capture area. This brush can also be used for cleaning negatives.

View on-line instructions at http://www.sensor-brush.com/instructions.html

€ 134.91

Show Me!

VD-SD-1

Sensor Brush Spinning Device

Self-Cleaning & Self-Charging Spinning Device (SD) For Sensor Brush VD-1
Due to problems related to liquid in canned air and flight restrictions we have developed a spinning device for the different Sensor Brush™ sizes which eliminates the requirement for canned air.
Colors may vary at time of shipment
Brush easily inserted into adapter and removed from adapter for swift cleaning (brush sold separately)
Requires 2 "AAA" batteries (not included)
WARNING: do not spin while on sensor

€ 38.85

Show Me!

VD-SD-3

Sensor Brush Spinning Device for VD-3

Self-Cleaning & Self-Charging Spinning Device (SD) For Sensor Brush VD-3
Due to problems related to liquid in canned air and flight restrictions we have developed a spinning device for the different Sensor Brush™ sizes which eliminates the requirement for canned air.
Colors may vary at time of shipment
Brush easily inserted into adapter and removed from adapter for swift cleaning (brush sold separately)
Requires 2 "AAA" batteries (not included)
WARNING: do not spin while on sensor

€ 38.85

Show Me!

VD-SD-3N

Sensor Brush Spinning Device for VD-3 (New Style)

Self-Cleaning & Self-Charging Spinning Device (SD) For Sensor Brush
Due to problems related to liquid in canned air and flight restrictions we have developed a spinning device for the different Sensor Brush™ sizes which eliminates the requirement for canned air.
Colors may vary at time of shipment
Brush easily inserted into adapter and removed from adapter for swift cleaning (brush sold separately)
Requires 2 "AAA" batteries (not included)
WARNING: do not spin while on sensor

€ 38.85

Show Me!

VD-SD-P

Sensor Brush Spinning Device Adapter
Sensor Brush Spinning Device Adapter for VD-1 1.6x Sensor Brush.
Purple Adapter for Visible Dust VD-2 1.3x Sensor Brush .

€ 14.96

Show Me!

VD-SD-B

Sensor Brush Spinning Device Adapter
Sensor Brush Spinning Device Adapter for VD-2 1.3x Sensor Brush.
Blue Adapter for Visible Dust VD-2 1.3x Sensor Brush .

€ 14.96

Show Me!

VD-SD-O

Sensor Brush Spinning Device Adapter
Sensor Brush Spinning Device Adapter for SBF ( touch up brush ) .
Orange Adapter for Visible Dust SBF.

€ 14.96

Show Me!

VD-SD-Y

Sensor Brush Spinning Device Adapter
Sensor Brush Spinning Device Adapter for Full Format Brush.
Yellow Adapter for Visible Dust VD-3 Full Format Brush . This Adapter is for the new style VD-3 with silver coloured metall holding the brush.

€ 14.96

Show Me!

VD-SD-G

Sensor Brush Spinning Device Adapter
Sensor Brush Spinning Device Adapter for 8mm Brush.
Green Adapter for Visible Dust VD-8 8mm Chamber Brush .

€ 14.96

Show Me!

VD-SD-2

Sensor Brush Spinning Device for VD-2

Self-Cleaning & Self-Charging Spinning Device (SD) For Sensor Brush VD-2
Due to problems related to liquid in canned air and flight restrictions we have developed a spinning device for the different Sensor Brush™ sizes which eliminates the requirement for canned air.
Colors may vary at time of shipment
Brush easily inserted into adapter and removed from adapter for swift cleaning (brush sold separately)
Requires 2 "AAA" batteries (not included)
WARNING: do not spin while on sensor

€ 38.85

Show Me!

VD-SC

Sensor Clean Kit
Some dust may not be removable with Sensor BrushT and is probably a liquid spot. In this case you should remove the spot using the wet cleaning method (Sensor CleanT). You may also use Chamber CleanT for better preventive maintenance. Based on our research cleaning your chamber will prolong the cleanliness of the sensor by up to 90%.

Sensor Clean™ is specifically formulated to have the following advantages over Methanol and Alcohol.

To prevent dust build up
To have strong cleaning property
To remove static and static build up
To be compatible with other applicators
To leave no organic residue or film
Non-alcoholic
Non-Hygroscopic
Non-flammable
Non-toxic
Non-corrosive to the sensor
Streak Free
Travel Safe

View on-line instructions at http://www.sensor-brush.com/instructions.html

€ 33.94

Show Me!

VD-CC

Chamber Clean Kit
Some dust may not be removable with Sensor BrushT and is probably a liquid spot. In this case you should remove the spot using the wet cleaning method (Sensor CleanT). You may also use Chamber CleanT for better preventive maintenance. Based on our research cleaning your chamber will prolong the cleanliness of the sensor by up to 90%.

Chamber Clean™ is specifically formulated to have the following properties:

Antistatic - to prevent dust accumulation
Coating - to act as a barrier
Cleaning - to remove stubborn flecks, mirror dust and fabrics
Lubricant - to reduce flecks by reducing friction

Chamber Clean™ solution is filtered to less than 0.2 micron, 40 times smaller than an 8 micron pixel size. Visible Dust does not recommend using other cleaning solutions, which may contaminate the sensor.

View on-line instructions at http://www.sensor-brush.com/instructions.html

€ 26.25

Show Me!

VD-SC-CC

Sensor Clean & Chamber Clean Kit
Save by ordering both of these products together.

Some dust may not be removable with Sensor BrushT and is probably a liquid spot. In this case you should remove the spot using the wet cleaning method (Sensor CleanT). You may also use Chamber CleanT for better preventive maintenance. Based on our research cleaning your chamber will prolong the cleanliness of the sensor by up to 90%. NEVER ATTEMPT TO CLEAN YOUR CHAMBER WITH MICROFIBRE CLOTH OR COTTON SWABS. These materials will tear and leave more behind.

€ 48.90

Show Me!

53108

Anti Static Gloves (Size LG)
PowerCleanT Anti-Static Gloves
Breathable Polyester with conductive Carbon fibers woven in. Available in sizes: L, XL

Safely handle film, cameras, electronics
Added protection when cleaning the sensor on DSLR's
Clean Room and Assembly area ready
Charge Decay: <0.1 Seconds
Surface Resistivity: <108
Reuseable - washable

Sensitive electronics are easily ruined by static discharge. Can you risk loosing data and your equipment to a stray charge when handling film and plastics? Probably not, so slip on these comfortable and reliable static dissipation gloves and work effortlessly. Keep an extra pair in your gadget bag and one set in with your test equipment. Effectiveness is observed through 10-12 washings.

€ 9.35

Show Me!

53116

Anti Static Gloves (size XL)
PowerCleanT Anti-Static Gloves
Breathable Polyester with conductive Carbon fibers woven in. Available in sizes: L, XL

Safely handle film, cameras, electronics
Added protection when cleaning the sensor on DSLR's
Clean Room and Assembly area ready
Charge Decay: <0.1 Seconds
Surface Resistivity: <108
Reuseable - washable

€ 9.35

Show Me!

3862E

Gepe Extreeme Card Safe
Extreme Memory Card Protector

Holds 4 Memory Cards

Holds CompactFlash, MMC/SD, MemoryStick & SmartMedia

Crushproof Case

Shock Resistant

Waterproof

Antistatic

Viewing Window

Floats

€ 24.16

Show Me!

36876-10

Low Lint Cotton Tip Applicator, 6" 10/2
Low Lint Cotton Tip Applicator, 6 inch.
10 Packs of 2 Pieces.
For larger quantities order part no 36876 .

€ 1.45

Show Me!

36815-10

Polyester Tipped Applicator, 6" 10/2
Polyester Tipped Applicator, 6" Sterile.
10 Packs of 2 Pieces.
For larger quantities order part no 36815 .

€ 2.26

Show Me!

36815

Polyester Tipped Applicator, 6" 100/2
Polyester Tipped Applicator, 6" Sterile.
100 Packs of 2 Pieces.
For smaller quantities order part no 36815-10 .

€ 15.02

Show Me!

LW2000W

Flashlight, LED 3 "AA" cell White
14 DAYS+ CONTINUOUS LIGHT -- That's all day..all night..all day....On 3 plain alkaline AA batteries (That's 336 Hours!)

. Visible for over a mile.
. Easy Twist head for on and off.
. Comes with wrist strap.
. Dimensions: 7 inches by 1 inch. 1.25 inch at head.

€ 42.98

Show Me!

LP-77

DigiKlear Cleaning System for Digital Cameras (LensPen)
DigiKlearT Cleaning system for digital camera lenses & LCD's. Also used by many including Canon to "Polish Off" the low pass filters. Designed for Digital and Video camera lenses and LCD screens. Uses a non-liquid cleaning compound. Safe for all lenses and screens

€ 11.77

Show Me!

MP1

Lens Pen, Mini-Pro
Lens Pen, Mini-Pro High-Tech Cleaning For Camera, Camcorder & Binocular Lenses! LensPen Mini-Pro's all natural chamois tip is impregnated with a revolutionary non-liquid cleaning compound that absorbs oily residues and contaminants safer, easier and more-effectively than by any other method.

€ 12.29

Show Me!

ELP-505-00

Optivisor 2.5X at 8"
OptiVisor is a precision binocular headband magnifier which permits unrestricted user efficiency while reducing eye strain - leaves both hands free and allows three dimensional vision - Used by anyone whose profession or craft requires close accurate work - Can be worn over prescription or safety eyeglasses.

Optivisor is equipped with these unique features

Optical Glass Prismatic Lenses - Ground and polished to precision optical standards - bevel edged and mounted in interchangeable plastic frame.

It tilts - Adjustable pivots allow the visor to be tilted out of the way when not needed and at your fingertips when you need magnification.

Adjustable Headband - Conforms to fit all head sizes - fabricated from a special blend of lightweight material - comfortable when worn for long periods of time.

High Impact visor - Provides a tough, durable, always new appearance.

Genuine Leather Comfort Band - Padded with orthopedic felt adds to comfort.

Special Optiloupe attachment also available for extra power. Other magnifications and replacement lenses available by special order.

€ 45.65

Show Me!

PAN-350

PanaVise, Multi-Purpose Work Center
This is one of our most versatile combinations, perfect for holding a camera or hobby needs. We start with a PAN-376 Self-Centering Extra-Wide Opening Head which is recommended for holding heavier objects but which can be used to hold delicate ones, too. We include the PAN-300 Standard Base with its single knob for "tilt, turn and rotate control," and finish off with the PAN-312 Parts Tray Base Mount. This is an economical and convenient combination - you'll find a million and one uses for it! The PAN-350 Multi-Purpose Work Center stands 7 7/8" (20cm) tall and weighs 5 lbs. (2.3kg). For electronics buffs, a PAN-371 Solder Station can be added for increased versatility.

€ 122.90

All price include MwSt. ( VAT )

Would you like a FREE copy of our Tool Catalog?

Micro-Tools Europe GmbH

a division of Micro-Tools
Bergstraße 7
48607 Ochtrup Germany
Telefon: +49 (0)2553 977774
Fax: +49 (0)2553 977775
Your Audio-Visual, Photographic and Video Repair Tool Source.