|
|
SPECIAL OFFER - Save 10% on all
|
orders over € 50 | Soldering/Desoldering SuppliesMicro-Tools EuropeYour Audio-Visual, Photographic and Video Repair, Tool Source. | ||||||||
| Picture | Add To Basket | Part # | Description | Price Includes MwSt. ( VAT ) | |||||
|---|---|---|---|---|---|---|---|---|---|
| Show Me! |  | 599 | Tip Cleaner,No Water Required,All Tip Ty
No water required. Cleans better than wet sponges and won't reduce tip temperature. May also be used as a portable tool holder and cleaner. | € 17.64 | |||||
| Show Me! | | 599-029 | Repl. Wire ForP599 Tip Cleaner,Waterless
Replacement wire for 599 Tip Waterless Cleaner | € 7.89 | |||||
| Show Me! | | 1814-25F | Desoldering Wick, 25' Thin .03 No Clean
Made from 100% copper and coated with type R flux, these desoldering wicks meet todays high standards demanded in the industry for no-clean enviroments. The minimum residue left after desoldering is inert and non-conductive; as a result, board rinsing is unnecessary. | € 12.07 | |||||
| Show Me! | | 1814-5F | Desoldering Wick, 5' Thin .03 No Clean
Desoldering wicks made from 100% copper and coated with type R flux for highest performance desoldering braid available. | € 2.73 | |||||
| Show Me! | | 1815-25F | Desoldering Wick, 25' Small .06 No Clean
Made from 100% copper and coated with type R flux, these desoldering wicks meet todays high standards demanded in the industry for no-clean enviroments. The minimum residue left after desoldering is inert and non-conductive; as a result, board rinsing is unnecessary. | € 12.07 | |||||
| Show Me! | | 1815-5F | Desoldering Wick, 5' Small .06 No Clean
Desoldering wicks made from 100% copper and coated with type R flux for highest performance desoldering braid available. | € 2.73 | |||||
| Show Me! | | 1816-25F | Desoldering Wick, 25' Med. .085 No Clean
Made from 100% copper and coated with type R flux, these desoldering wicks meet todays high standards demanded in the industry for no-clean enviroments. The minimum residue left after desoldering is inert and non-conductive; as a result, board rinsing is unnecessary. | € 12.13 | |||||
| Show Me! | | 1816-5F | Desoldering Wick, 5' Medium .085 No Clea
Desoldering wicks made from 100% copper and coated with type R flux for highest performance desoldering braid available. | € 2.78 | |||||
| Show Me! | | 1817-25F | Desoldering Wick, 25' Wide .10 No Clean
Made from 100% copper and coated with type R flux, these desoldering wicks meet todays high standards demanded in the industry for no-clean enviroments. The minimum residue left after desoldering is inert and non-conductive; as a result, board rinsing is unnecessary. | € 13.58 | |||||
| Show Me! | | 1817-5F | Desoldering Wick, 5' Wide .10 No Clean
Desoldering wicks made from 100% copper and coated with type R flux for highest performance desoldering braid available. | € 3.01 | |||||
| Show Me! | | 1000-2 | Wickgun W/#2 Desoldering Braid
The desoldering system that fits in the palm of your hand. The simple one handed operation of the XURON Wickgun eliminates the tool swapping, three hands required, process associated with conventional desoldering braid use. Your technicians work quickly and precisely with just their Wickgun and their soldering iron. Productivity is enhanced. | € 54.93 | |||||
| Show Me! | | W4015-1 | Wickgun Cassette 15' #1(0.035") Braid
Wickgun desoldering braid dispensers combine the capabilities of desoldering braid with the convenience of a hand tool. Simple, one handed operation dispenses, positions and cuts off braid, even the smaller, hard to control sizes. The only other tool you need is your soldering iron. Wickgun braid dispensers fit comfortably in your hand; rotate the thumb wheel to advance or retract the braid, squeeze the trigger to cut off the used braid. There are no plungers to push, spring loaded levers to cock or vacuum chambers to empty. You never touch the braid. You don't burn your fingers. You stay clean and solderability is enhanced since the desoldering braid is not contaminated by finger oil or other foreign matter. | € 8.64 | |||||
| Show Me! | | W4015-2 | Wickgun Cassette 15' #2(0.060") Braid
Wickgun desoldering braid dispensers combine the capabilities of desoldering braid with the convenience of a hand tool. Simple, one handed operation dispenses, positions and cuts off braid, even the smaller, hard to control sizes. The only other tool you need is your soldering iron. Wickgun braid dispensers fit comfortably in your hand; rotate the thumb wheel to advance or retract the braid, squeeze the trigger to cut off the used braid. There are no plungers to push, spring loaded levers to cock or vacuum chambers to empty. You never touch the braid. You don't burn your fingers. You stay clean and solderability is enhanced since the desoldering braid is not contaminated by finger oil or other foreign matter. | € 8.64 | |||||
| Show Me! | | W4015-3 | Wickgun Cassette 15' #3(0.075") Braid
Wickgun desoldering braid dispensers combine the capabilities of desoldering braid with the convenience of a hand tool. Simple, one handed operation dispenses, positions and cuts off braid, even the smaller, hard to control sizes. The only other tool you need is your soldering iron. Wickgun braid dispensers fit comfortably in your hand; rotate the thumb wheel to advance or retract the braid, squeeze the trigger to cut off the used braid. There are no plungers to push, spring loaded levers to cock or vacuum chambers to empty. You never touch the braid. You don't burn your fingers. You stay clean and solderability is enhanced since the desoldering braid is not contaminated by finger oil or other foreign matter. | € 8.70 | |||||
| Show Me! | | UNG-7874B | Desoldering Pump
Long life replaceable teflon tip, all aluminum construction. (not affected by heat or solvents like plastic models). | € 34.63 | |||||
| Show Me! | | 10-200 | Solder Flux, (Special For All Metals)
Cleans and prepares all metals for soldering. Contains no rosin. | € 11.48 | |||||
| Show Me! | | 10-1207 | Solder Paste
For use with non-cored solder or to add fluxing power to cored solder. Use on chassis, sheet metal, buss bars , etc. | € 12.76 | |||||
| Show Me! | | SP-1-S | Soldering Iron Sponge, Antex
Antex, Sponge for Iron Stand | € 2.08 | |||||
| Show Me! | | 7978-F | EZ-Torch mini-torch 
Powered by butane cartridge. Temperatures to 2500øF. | € 26.62 | |||||
All price include MwSt. ( VAT )
Micro-Tools Europe GmbH
a division of Micro-Tools
Bergstraße 7
48607 Ochtrup Germany
Telefon: +49 (0)2553 977774
Fax: +49 (0)2553 977775
Your Audio-Visual, Photographic and Video Repair Tool Source.
Copyright Fargo Enterprises, Inc. © 2007
All rights reserved
Would you like a FREE copy of
our Tool Catalog?
Micro-Tools Europe GmbH
a division of Micro-Tools
Bergstraße 7
48607 Ochtrup Germany
Telefon: +49 (0)2553 977774
Fax: +49 (0)2553 977775
Your Audio-Visual, Photographic and Video Repair Tool Source.
Copyright Fargo Enterprises, Inc. © 2007
All rights reserved