Menda Circuitracer Continuity Tester – 0–10 Ohms, 35130

Quickly check electrical continuity, identify open connections, and troubleshoot wiring with the Menda Circuitracer Continuity Tester. Designed for electronics repair, electrical maintenance, and precision assembly work, this compact handheld tester provides a convenient way to verify electrical connections in unpowered circuits.

The Circuitracer features an illuminated probe that provides an easy-to-see visual indication when continuity is detected. Instead of repeatedly looking away at a separate meter display, you can observe the indicator directly on the tool while checking connections.

With a specified testing range of 0–10 ohms, the Circuitracer is useful for identifying complete electrical paths, checking wiring connections, and locating possible shorts or grounding faults. The tester operates using a 3-volt probe circuit with a maximum current of 270 mA.

Two AAA batteries are included, allowing you to begin testing without purchasing a separate power source. Replacement probe tips are also available, making the Circuitracer a practical tool for routine electronics servicing and maintenance.

Made in the USA, this continuity tester offers a straightforward solution for technicians who need a quick visual indication of electrical continuity.

Features & Benefits

• 0–10 Ohm Testing Range: Designed to check continuity in low-resistance electrical paths.

• Illuminated Probe Indicator: Provides a visible signal when continuity is detected.

• Convenient Handheld Design: Allows quick testing of wiring, connections, and electrical components.

• Battery-Powered Operation: Tests unpowered circuits using its internal power source.

• Two AAA Batteries Included: Provides the batteries required for operation.

• 3-Volt Probe Circuit: Operates at the manufacturer's specified probe voltage.

• 270 mA Maximum Probe Current: Defined operating specification for the continuity testing circuit.

• Useful for Troubleshooting: Helps identify open circuits, unintended shorts, and grounding connections.

• Replacement Tips Available: Supports continued use with compatible replacement probe tips.

• Easy Visual Confirmation: Eliminates the need to interpret a numerical display for basic continuity checks.

• Made in the USA: Manufactured in the United States.

Specifications

• Brand: Menda

• Product Line: Circuitracer

• Manufacturer Part Number: 35130

• SKU: 35130

• Product Type: Electrical Continuity Tester

• Testing Range: 0–10 Ohms

• Probe Voltage: 3V

• Maximum Probe Current: 270 mA

• Indicator Type: Illuminated Lamp

• Power Source: 2 AAA Batteries

• Batteries Included: Yes

• Replacement Probe Tips: Available Separately

• Primary Application: Continuity Testing of Unpowered Circuits

• UPC: 196943988045

• Country of Origin: United States

Ideal For

• Electronics repair and troubleshooting

• Electrical continuity checks

• Checking wiring connections

• Identifying open circuits

• Locating possible short circuits

• Ground connection testing

• Electronics assembly and inspection

• Instrument maintenance

• Small appliance servicing

• Repair shops and technical workstations

• General electrical maintenance

Quick Continuity Testing

The Circuitracer is designed to determine whether an electrical path has continuity.

When the probe and test connection complete a circuit within the tester's operating range, the indicator lamp illuminates.

This makes it useful for checking connections without needing to read resistance values from a separate display.

The tester is particularly convenient when performing repeated checks during assembly, repair, or maintenance.

Illuminated Probe for Easy Visual Confirmation

The illuminated indicator provides immediate visual feedback during testing.

By placing the indication close to the test point, the Circuitracer allows you to concentrate on positioning the probe and making reliable contact.

This design is useful when working with small electronic assemblies, connectors, and closely spaced wiring.

The lamp indicates continuity rather than displaying an exact resistance measurement.

0–10 Ohm Testing Range

The Circuitracer is specified for continuity testing over a 0–10 ohm range.

This makes it suitable for checking low-resistance electrical connections, including wires, switches, and conductive paths.

It can also help identify unintended connections or shorts when troubleshooting unpowered equipment.

For precise resistance measurements or applications outside this range, use an appropriately rated multimeter.

Battery-Powered Testing of Unpowered Circuits

The tester uses two AAA batteries to supply its continuity testing circuit.

Because the Circuitracer provides its own test voltage, the circuit being checked does not need an external power source.

The probe operates at 3 volts with a maximum current of 270 mA.

Always disconnect electrical power and discharge stored energy before performing continuity tests. Verify that the circuit and components can safely tolerate the tester's applied voltage and current.

Useful for Locating Electrical Faults

A continuity tester can help identify several common electrical problems.

Open Circuits

Check whether a wire or connection has an uninterrupted electrical path.

Short Circuits

Test for unintended electrical connections between conductors that should remain isolated.

Ground Connections

Check for continuity between a conductor and an intended grounding point.

These functions make the Circuitracer a useful supplemental tool for diagnosing wiring and connection problems.

Replacement Probe Tips Available

The Circuitracer supports compatible replacement probe tips.

This allows worn or damaged tips to be replaced without purchasing another complete tester.

Replacement tips are sold separately.

Ready to Use with Included Batteries

Two AAA batteries are included with the tester.

This makes it convenient to add the Circuitracer to an electronics repair kit or maintenance workstation.

Its straightforward illuminated indication is particularly useful for technicians who need to perform frequent continuity checks.

Frequently Asked Questions

What is the Menda 35130 used for?

It is used to check electrical continuity, identify open circuits, and investigate possible shorts or grounding connections in unpowered electrical systems.

What is the testing range?

The specified continuity testing range is 0–10 ohms.

Does the tester have a digital display?

No. It uses an illuminated lamp to provide a visual continuity indication.

How does the continuity indicator work?

The lamp illuminates when the tester detects an electrical path within its specified operating range.

Can it detect an open circuit?

Yes. It can help identify a broken or disconnected electrical path by checking for continuity.

Can it help locate short circuits?

Yes. It can be used to check for unintended low-resistance connections in unpowered circuits.

Can it be used to check ground connections?

Yes. It can help verify continuity to an intended grounding point.

What voltage does the probe use?

The probe circuit operates at 3 volts.

What is the maximum probe current?

The manufacturer specifies a maximum probe current of 270 mA.

Does it require batteries?

Yes. It operates using two AAA batteries.

Are batteries included?

Yes. Two AAA batteries are included.

Can I use this tester on a live electrical circuit?

No. Continuity testing must be performed on unpowered circuits. Disconnect power and discharge stored energy before testing.

Can I use it to measure voltage?

This model is intended for continuity testing. Use an appropriately rated voltage tester or multimeter when checking for voltage.

Does it measure exact resistance values?

No. The lamp provides a visual indication of continuity within the specified range. It does not display a numerical resistance reading.

Can I use it to test switches?

Yes, provided the switch is disconnected from power and the test conditions are suitable for the tester.

Can I use it for electronics repair?

Yes. It is useful for checking wiring, connections, and appropriate components during electronics repair.

Are replacement probe tips available?

Yes. Compatible replacement tips are available separately.

Is this the same as the Menda 35100?

No. Model 35130 is specified as a 0–10 ohm continuity tester. Model 35100 is a different Circuitracer configuration with additional voltage-testing functions.

Is it suitable for sensitive electronic components?

The tester applies 3 volts with a maximum current of 270 mA. Verify that the components being tested can tolerate these conditions before use.

Where is the tester manufactured?

It is made in the United States.

Micro-Tools makes every attempt to provide accurate information for each item. Actual packaging and/or specifications may be slightly different from the information and picture provided.