Menda 8 oz Blue durAstatic ESD-Safe Dispensing Bottle with One-Touch Pump – 35284
Keep cleaning liquids conveniently accessible while supporting electrostatic discharge protection with this 8 oz blue durAstatic dispensing bottle from Menda. Designed for static-sensitive work environments, this dispenser combines a static-dissipative HDPE bottle with a stainless steel One-Touch pump for convenient, one-handed liquid dispensing.
The blue square bottle is manufactured from Menda's durAstatic material, which provides long-lasting static-dissipative properties without migratory antistatic additives. This helps reduce static charge accumulation while minimizing the potential for contamination from the bottle material.
The stainless steel One-Touch pump dispenses approximately 0.2 cc of liquid per press into a dish-shaped reservoir. This makes it easy to moisten cotton swabs, cleaning wipes, and other suitable applicators without pouring directly from the bottle.
An opening in the center of the dispensing dish allows excess liquid to drain back into the container. This return-flow design is convenient for routine cleaning applications where small amounts of liquid are accessed repeatedly.
The spring-loaded stainless steel lid stays open or closed as needed, helping minimize evaporation and odors between uses. An embossed ESD protective symbol identifies the bottle for use in static-controlled work areas.
With its 8 oz capacity, this dispenser provides additional liquid storage compared with smaller 4 oz and 6 oz models. The square bottle measures approximately 5 inches tall and 2-1/4 inches wide and deep, making it a practical choice for electronics assembly benches, precision repair stations, and laboratory workstations.
Made in the USA, this reusable dispenser provides a convenient solution for applying compatible cleaning liquids during electronics manufacturing, maintenance, and precision cleaning.
Features & Benefits
-
8 oz Capacity: Holds approximately 240 mL of compatible cleaning liquid.
-
Blue durAstatic HDPE Bottle: Static-dissipative construction designed for use around sensitive electronic components.
-
Long-Lasting ESD Properties: Helps reduce static charge accumulation in ESD-protected work environments.
-
No Migratory Antistatic Additives: Helps minimize the potential for contamination from the bottle material.
-
Stainless Steel One-Touch Pump: Durable dispensing mechanism designed for repeated use.
-
Approximately 0.2 cc Per Press: Dispenses small quantities of liquid with each pump operation.
-
Liquid Return Opening: Allows excess liquid in the dispensing dish to drain back into the bottle.
-
Dish-Shaped Dispensing Reservoir: Convenient for applying liquid to swabs, wipes, and other suitable applicators.
-
One-Handed Operation: Makes dispensing convenient during precision work.
-
Spring-Loaded Lid: Stays open or closed and helps minimize evaporation and odors.
-
Embossed ESD Protective Symbol: Identifies the bottle for use in static-controlled work areas.
-
Square Bottle Design: Provides a stable shape for electronics benches and assembly stations.
-
5" Overall Height: Convenient size for workstation use.
-
Made in the USA: Manufactured in the United States.
Specifications
-
Brand: Menda
-
Manufacturer Part Number: 35284
-
SKU: 35284
-
Product Series: durAstatic
-
Pump Series: One-Touch
-
Product Type: ESD-Safe Liquid Dispensing Bottle
-
Bottle Capacity: 8 oz (Approximately 240 mL)
-
Bottle Color: Blue
-
Bottle Shape: Square
-
Bottle Material: Static-Dissipative High-Density Polyethylene (HDPE)
-
Pump Material: Stainless Steel
-
Pump Type: One-Touch
-
Dispensing Volume: Approximately 0.2 cc (0.2 mL) Per Press
-
Pump Operation: Manual, One-Handed
-
Dispensing Surface: Dish-Shaped Reservoir
-
Liquid Return Feature: Center Opening Allows Excess Liquid to Drain Back into Bottle
-
Pump Lid: Spring-Loaded, Stays Open or Closed
-
Bottle Neck / Closure Size: 38-400
-
Overall Height: 5" (127 mm)
-
Width: 2-1/4" (57.2 mm)
-
Depth: 2-1/4" (57.2 mm)
-
ESD Identification: Embossed ESD Protective Symbol
-
Surface Resistance (Rtt): 1 × 10⁴ to Less Than 1 × 10¹¹ Ohms
-
Surface Resistance Test Standard: ANSI/ESD STM11.12
-
Charge Decay: Less Than 2 Seconds
-
Charge Decay Test Standard: IEC 61340-2-3:2016
-
Package Quantity: 1 Complete Bottle with Pump
-
Country of Origin: United States
Ideal For
-
ESD-protected electronics workstations
-
Printed circuit board assembly and repair
-
Electronics manufacturing and inspection
-
Precision electronics maintenance
-
Semiconductor handling environments
-
Dispensing compatible cleaning liquids
-
Applying liquids to cotton swabs
-
Moistening lint-free cleaning wipes
-
Laboratory and technical workstations
-
Equipment maintenance
-
Workstations requiring larger liquid capacity
-
General precision cleaning applications
Larger 8 oz Capacity
The 8 oz capacity provides additional liquid storage for workstations where cleaning fluids are used frequently.
Compared with the smaller 4 oz and 6 oz models, this bottle can hold more liquid between refills.
Its square shape provides a stable base and makes it convenient to position alongside tools, cleaning supplies, and inspection equipment.
The bottle measures approximately 5 inches tall and 2-1/4 inches wide and deep.
The blue color also makes it easy to distinguish from other dispensing bottles when multiple cleaning fluids are used at the same workstation.
durAstatic Protection for Sensitive Electronics
The blue durAstatic bottle provides long-lasting static-dissipative properties designed to help control electrostatic discharge around sensitive electronic components.
Static electricity can damage delicate electronic assemblies during cleaning, handling, and maintenance. Using suitable ESD-control materials helps support a properly managed electrostatic discharge protection program.
The bottle has a specified surface resistance range of 1 × 10⁴ to less than 1 × 10¹¹ ohms, tested according to ANSI/ESD STM11.12.
Its charge decay time is less than two seconds, tested according to IEC 61340-2-3:2016.
These properties help reduce static charge accumulation around sensitive electronics.
The durAstatic material also contains no migratory antistatic additives, helping minimize the potential for contamination from the bottle.
Stainless Steel One-Touch Pump
The stainless steel One-Touch pump provides convenient access to small quantities of liquid.
Each press dispenses approximately 0.2 cc into the dish-shaped reservoir at the top of the pump.
This makes it easy to moisten a suitable applicator without pouring liquid directly from the container.
The one-handed design is particularly convenient when working with delicate electronic assemblies or performing precision cleaning tasks.
Liquid Return Opening
The One-Touch pump features an opening in the center of the dispensing dish that allows excess liquid to drain back into the bottle.
This design is convenient for routine cleaning applications where the dispensing surface is used repeatedly.
Because liquid can return to the container, the One-Touch pump is best suited to applications where return flow is acceptable.
For applications requiring separation between dispensed liquid and unused contents, Menda's non-return Pure-Touch or Pure-Take pump designs may be more suitable.
Spring-Loaded Lid Helps Reduce Evaporation
The stainless steel pump includes a spring-loaded lid that can remain open or closed.
Keeping the lid closed between uses helps minimize evaporation and odors from compatible liquids.
The lid also covers the dispensing reservoir when the bottle is not in use.
This feature is convenient for workstations where cleaning fluids are accessed frequently throughout the day.
Chemical Compatibility
The dispenser is intended for use with compatible cleaning fluids and other liquids.
Chemical compatibility depends on the specific formulation and all components of the dispensing assembly.
Verify compatibility before filling the bottle with alcohol, solvents, or other chemicals.
The bottle is supplied empty and does not include cleaning liquid.
Frequently Asked Questions
What is the Menda 35284 used for?
It is an ESD-safe liquid dispensing bottle designed for applying compatible cleaning fluids and other liquids at static-sensitive workstations.
How much liquid does the bottle hold?
The bottle has an 8 oz capacity, approximately 240 mL.
What color is the bottle?
The bottle is blue.
What is the difference between Menda 35282, 35283, and 35284?
All three are blue durAstatic bottles with stainless steel One-Touch pumps. Model 35282 holds 4 oz, 35283 holds 6 oz, and 35284 holds 8 oz.
What is the bottle made from?
It is made from Menda's static-dissipative durAstatic HDPE material.
What makes this bottle ESD-safe?
The durAstatic material provides static-dissipative electrical properties designed to help control static buildup around sensitive electronics.
What is the bottle's surface resistance?
The specified resistance range is 1 × 10⁴ to less than 1 × 10¹¹ ohms.
Does the bottle contain migratory antistatic additives?
No. Menda's durAstatic material is designed without migratory antistatic additives.
What type of pump does it use?
It features a stainless steel Menda One-Touch pump.
How much liquid does each pump press dispense?
Approximately 0.2 cc, equivalent to 0.2 mL, per press.
Does the One-Touch pump allow liquid to return to the bottle?
Yes. An opening in the center of the dispensing dish allows excess liquid to drain back into the container.
Does this pump prevent liquid from returning to the bottle?
No. The One-Touch pump is designed to allow excess liquid to return. Menda's Pure-Touch and Pure-Take pumps feature non-return designs.
Does the pump lock?
No. This model uses the One-Touch pump rather than a locking Pure-Take pump.
Can I operate the pump with one hand?
Yes. The pump is designed for convenient one-handed operation.
Does the pump have a dispensing dish?
Yes. It features a dish-shaped reservoir for applying liquid to suitable applicators.
Does the lid stay open?
Yes. The spring-loaded lid can remain open or closed.
Does the lid help reduce evaporation?
Yes. Closing the lid helps minimize evaporation and odors between uses.
How tall is the bottle?
The overall height is approximately 5 inches (127 mm).
What are the bottle's width and depth?
The bottle measures approximately 2-1/4 inches wide and 2-1/4 inches deep.
Does the bottle have graduated measurement markings?
Menda specifies graduated markings for the 6 oz bottles in this series, but does not specify them for this 8 oz model.
Is the bottle marked with an ESD symbol?
Yes. It features an embossed ESD protective symbol.
Can I use it with isopropyl alcohol?
It may be used with compatible alcohol formulations. Verify compatibility with the complete bottle and pump assembly before use.
Can it be used for electronics cleaning?
Yes. It is designed for use in electronics work environments where ESD control is important.
Can the bottle be refilled?
Yes. It can be reused with compatible liquids when properly cleaned and maintained.
Does the bottle come filled with liquid?
No. This listing is for the empty dispensing bottle with its pump.
How many bottles are included?
One complete bottle with stainless steel One-Touch pump is included.
Where is this product manufactured?
It is made in the United States.
| SKU: | 35284 |
| UPC: | 196943988144 |
| BRAND: | Menda |
| MPN: | 35284 |
| Made In: | United States |
