Menda 6 oz Blue durAstatic ESD-Safe Dispensing Bottle with Pure-Touch Pump – 35285

Protect sensitive electronics while keeping cleaning liquids conveniently accessible with this 6 oz blue durAstatic dispensing bottle from Menda. Designed for ESD-protected workstations, this dispenser combines a static-dissipative HDPE bottle with a stainless steel Pure-Touch pump that helps prevent contamination of the unused liquid.

The blue square bottle is manufactured from Menda's durAstatic material, which provides long-lasting static-dissipative properties without migratory antistatic additives. This construction helps control static charge accumulation while reducing the potential for contamination from the bottle material.

The stainless steel Pure-Touch pump dispenses approximately 0.2 cc of liquid per press into a dish-shaped reservoir. Its one-handed operation makes it easy to moisten cotton swabs, cleaning wipes, and other suitable applicators without pouring directly from the bottle.

Unlike standard One-Touch pumps, the Pure-Touch pump features a purity protector that prevents dispensed liquid from flowing back into the container. This helps preserve the cleanliness of the unused liquid, making it particularly useful for precision cleaning and applications where contamination control is important.

A spring-loaded stainless steel lid stays open or closed as needed and helps minimize evaporation and odors between uses. Graduated markings along one side of the bottle make it easy to monitor the approximate amount of liquid remaining.

The bottle also features an embossed ESD protective symbol for easy identification in static-controlled work environments.

Made in the USA, this reusable dispenser provides a convenient solution for electronics assembly, circuit board cleaning, precision repair, and other applications requiring controlled dispensing of compatible liquids.

Features & Benefits

• 6 oz Capacity: Holds approximately 180 mL of compatible cleaning liquids.

• Blue durAstatic HDPE Bottle: Static-dissipative construction designed for use around sensitive electronic components.

• Stainless Steel Pure-Touch Pump: Durable dispensing mechanism designed for repeated workstation use.

• Non-Return Purity Protector: Prevents dispensed liquid from flowing back into the bottle, helping protect unused contents from contamination.

• Approximately 0.2 cc Per Press: Delivers small quantities of liquid with each pump operation.

• Dish-Shaped Dispensing Reservoir: Convenient for moistening cotton swabs, cleaning wipes, and other suitable applicators.

• One-Handed Operation: Makes dispensing convenient during precision cleaning and repair.

• Long-Lasting ESD Properties: Helps control static charge accumulation in ESD-protected work environments.

• No Migratory Antistatic Additives: Helps reduce the potential for contamination from the bottle material.

• Spring-Loaded Lid: Stays open or closed and helps minimize evaporation and odors.

• Graduated Volume Markings: Makes it easy to estimate how much liquid remains.

• Embossed ESD Protective Symbol: Identifies the bottle for static-controlled work areas.

• Square Bottle Design: Convenient shape for electronics benches and assembly stations.

• Made in the USA: Genuine Menda dispensing bottle and pump.

Specifications

• Brand: Menda

• Manufacturer Part Number: 35285

• SKU: 35285

• Product Series: durAstatic

• Pump Series: Pure-Touch

• Product Type: ESD-Safe Liquid Dispensing Bottle

• Bottle Capacity: 6 oz (Approximately 180 mL)

• Bottle Color: Blue

• Bottle Shape: Square

• Bottle Material: Static-Dissipative High-Density Polyethylene (HDPE)

• Pump Material: Stainless Steel

• Pump Type: Pure-Touch

• Dispensing Volume: Approximately 0.2 cc (0.2 mL) Per Press

• Pump Operation: Manual, One-Handed

• Dispensing Surface: Dish-Shaped Reservoir

• Liquid Return Protection: Pure-Touch Purity Protector Prevents Dispensed Liquid from Re-Entering Bottle

• Pump Lid: Spring-Loaded, Stays Open or Closed

• Volume Markings: Graduated Markings on One Side

• ESD Identification: Embossed ESD Protective Symbol

• Surface Resistance (Rtt): 1 × 10⁴ to Less Than 1 × 10¹¹ Ohms

• Surface Resistance Test Standard: ANSI/ESD STM11.12

• Charge Decay: Less Than 2 Seconds

• Charge Decay Test Standard: IEC 61340-2-3:2016

• Package Quantity: 1 Complete Bottle with Pump

• Country of Origin: United States

Ideal For

• ESD-protected electronics workstations

• Printed circuit board assembly and repair

• Precision electronics cleaning

• Electronics manufacturing and inspection

• Semiconductor handling environments

• Dispensing compatible cleaning liquids

• Applications requiring protection against liquid return

• Moistening cotton swabs and lint-free cleaning wipes

• Laboratory and technical workstations

• Precision equipment maintenance

• Workstations where contamination control is important

Pure-Touch Pump Helps Prevent Contamination

The stainless steel Pure-Touch pump features a purity protector designed to prevent dispensed liquid from returning to the bottle.

When the pump is pressed, approximately 0.2 cc of liquid is delivered into the dish-shaped reservoir.

The purity protector prevents liquid in the dispensing dish from flowing back into the container, helping maintain the cleanliness of the unused contents.

This is particularly useful when applying cleaning fluids with cotton swabs, wipes, or other applicators that may introduce contaminants to the dispensing surface.

The non-return design makes the Pure-Touch pump a practical choice for precision cleaning and applications where liquid purity is important.

durAstatic Protection for Sensitive Electronics

The blue durAstatic bottle provides long-lasting static-dissipative properties designed to help control electrostatic discharge around sensitive electronic components.

Its specified surface resistance range is 1 × 10⁴ to less than 1 × 10¹¹ ohms, tested according to ANSI/ESD STM11.12.

The bottle also has a charge decay time of less than two seconds, tested according to IEC 61340-2-3:2016.

These properties help reduce static charge accumulation in properly managed ESD-protected work environments.

The durAstatic material contains no migratory antistatic additives, helping minimize the potential for contamination from the bottle.

Convenient One-Handed Dispensing

The Pure-Touch pump allows you to dispense small quantities of liquid with one hand.

Each press delivers approximately 0.2 cc into the dish-shaped reservoir, making it easy to moisten a suitable applicator without pouring directly from the container.

This is especially convenient when working with delicate electronic assemblies or performing detailed cleaning tasks.

Spring-Loaded Lid Helps Reduce Evaporation

The stainless steel pump includes a spring-loaded lid that can remain open or closed.

Keeping the lid closed between uses helps minimize evaporation and odors from compatible liquids.

The lid also covers the dispensing reservoir when the bottle is not in use, making it convenient for workstations where cleaning fluids are accessed frequently.

Graduated Markings for Easy Monitoring

The 6 oz bottle features graduated markings along one side, allowing you to estimate the remaining liquid without opening the container.

These markings are useful for monitoring frequently used cleaning solutions and maintaining supplies at multiple workstations.

The embossed ESD protective symbol provides additional identification for static-controlled work areas.

Compact Square Bottle Design

The square HDPE bottle provides a convenient shape for electronics benches and other work surfaces.

Its compact design makes it easy to position alongside tools, cleaning supplies, and inspection equipment.

The blue color also makes it easy to distinguish from other dispensing bottles when multiple cleaning fluids are used at the same workstation.

Chemical Compatibility

The dispenser is intended for use with compatible cleaning fluids and other liquids.

Chemical compatibility depends on the specific formulation and all components of the dispensing assembly.

Verify compatibility before filling the bottle with alcohol, solvents, or other chemicals.

The bottle is supplied empty and does not include cleaning liquid.

Frequently Asked Questions

What is the Menda 35285 used for?

It is an ESD-safe liquid dispensing bottle designed for applying compatible cleaning fluids and other liquids at static-sensitive workstations.

How much liquid does the bottle hold?

The bottle has a 6 oz capacity, approximately 180 mL.

What color is the bottle?

The bottle is blue.

What is the difference between Menda 35283 and 35285?

Both are blue 6 oz durAstatic bottles. Model 35283 features a One-Touch pump that allows excess liquid to return to the bottle, while model 35285 uses a Pure-Touch pump that prevents dispensed liquid from flowing back into the container.

What is the bottle made from?

It is made from Menda's static-dissipative durAstatic HDPE material.

What makes this bottle ESD-safe?

The durAstatic material provides static-dissipative electrical properties designed to help control static buildup around sensitive electronics.

What is the bottle's surface resistance?

The specified resistance range is 1 × 10⁴ to less than 1 × 10¹¹ ohms.

Does the bottle contain migratory antistatic additives?

No. Menda's durAstatic material is designed without migratory antistatic additives.

What type of pump does it use?

It features a stainless steel Menda Pure-Touch pump.

How much liquid does each pump press dispense?

Approximately 0.2 cc, equivalent to 0.2 mL, per press.

Does the Pure-Touch pump prevent liquid from returning to the bottle?

Yes. Its purity protector prevents dispensed liquid from re-entering the container.

Why is the non-return feature useful?

It helps protect unused liquid from contamination that could be introduced through the dispensing dish during normal use.

What is the difference between Pure-Touch and One-Touch pumps?

The Pure-Touch pump prevents dispensed liquid from returning to the bottle. The One-Touch pump has an opening that allows excess liquid to drain back into the container.

What is the difference between Pure-Touch and Pure-Take pumps?

Both feature non-return protection. The Pure-Take pump also includes a locking mechanism.

Does the Pure-Touch pump lock?

No. This model uses the Pure-Touch pump rather than the locking Pure-Take pump.

Can I operate the pump with one hand?

Yes. The pump is designed for convenient one-handed operation.

Does the pump have a dispensing dish?

Yes. It features a dish-shaped reservoir for applying liquid to suitable applicators.

Does the lid stay open?

Yes. The spring-loaded lid can remain open or closed.

Does the lid help reduce evaporation?

Yes. Closing the lid helps minimize evaporation and odors between uses.

Does the bottle have measurement markings?

Yes. Graduated markings along one side allow you to estimate the remaining liquid volume.

Is the bottle marked with an ESD symbol?

Yes. It features an embossed ESD protective symbol.

Can I use it with isopropyl alcohol?

It may be used with compatible alcohol formulations. Verify compatibility with the complete bottle and pump assembly before use.

Can it be used for electronics cleaning?

Yes. It is designed for use in electronics work environments where ESD control is important.

Can the bottle be refilled?

Yes. It can be reused with compatible liquids when properly cleaned and maintained.

Does the bottle come filled with liquid?

No. This listing is for the empty dispensing bottle with its pump.

How many bottles are included?

One complete bottle with stainless steel Pure-Touch pump is included.

Where is this product manufactured?

It is made in the United States.

Micro-Tools makes every attempt to provide accurate information for each item. Actual packaging and/or specifications may be slightly different from the information and picture provided.