Menda 6 oz Blue durAstatic ESD-Safe Dispensing Bottle with Take-Along Locking Pump – 35287

Keep cleaning liquids conveniently accessible at the workstation and securely stored during travel with this 6 oz blue durAstatic dispensing bottle from Menda. Featuring a stainless steel Take-Along locking pump and static-dissipative HDPE construction, this dispenser is designed for electronics workstations, precision cleaning, and field service applications.

The blue square bottle is manufactured from Menda's durAstatic material, which provides long-lasting static-dissipative properties without migratory antistatic additives. This helps control static charge accumulation around sensitive electronic components while reducing the potential for contamination from the bottle material.

The stainless steel Take-Along pump dispenses approximately 0.2 cc of liquid per press into a dish-shaped reservoir. Its convenient one-handed operation makes it easy to moisten cotton swabs, lint-free wipes, and other suitable applicators without pouring directly from the container.

The Take-Along pump includes a locking mechanism designed to prevent leaks when engaged, making it especially useful for field service kits, mobile technicians, and transporting cleaning supplies between workstations.

An opening in the center of the dispensing dish allows excess liquid to drain back into the bottle. This return-flow design reduces the amount of liquid left exposed in the reservoir between uses.

The spring-loaded stainless steel lid stays open or closed as needed and helps minimize evaporation and odors. Graduated markings along one side of the bottle allow you to monitor the approximate amount of liquid remaining.

An embossed ESD protective symbol identifies the bottle for use in static-controlled environments, while the blue color makes it easy to distinguish from other dispensing bottles.

Made in the USA, this reusable dispenser combines convenient liquid dispensing, a travel-friendly locking pump, and static-dissipative protection for electronics assembly, repair, and maintenance.

Features & Benefits

• 6 oz Capacity: Holds approximately 180 mL of compatible cleaning liquid.

• Blue durAstatic HDPE Bottle: Static-dissipative construction designed for use around sensitive electronic components.

• Stainless Steel Take-Along Pump: Locking dispensing pump designed for workstation and mobile service use.

• Locking Pump Design: Helps prevent leaks when engaged during storage and transportation.

• Liquid Return Opening: Allows excess liquid in the dispensing dish to drain back into the bottle.

• Approximately 0.2 cc Per Press: Delivers small quantities of liquid with each pump operation.

• Dish-Shaped Dispensing Reservoir: Convenient for moistening cotton swabs, cleaning wipes, and other suitable applicators.

• One-Handed Operation: Makes dispensing convenient during precision cleaning and repair.

• Long-Lasting ESD Properties: Helps reduce static charge accumulation in ESD-protected work environments.

• No Migratory Antistatic Additives: Helps minimize the potential for contamination from the bottle material.

• Spring-Loaded Lid: Stays open or closed and helps minimize evaporation and odors.

• Graduated Volume Markings: Makes it easy to estimate how much liquid remains.

• Embossed ESD Protective Symbol: Identifies the bottle for static-controlled work areas.

• Square Bottle Design: Convenient shape for electronics benches, tool carts, and service kits.

• Made in the USA: Manufactured in the United States.

Specifications

• Brand: Menda

• Manufacturer Part Number: 35287

• SKU: 35287

• Product Series: durAstatic

• Pump Series: Take-Along

• Product Type: ESD-Safe Liquid Dispensing Bottle

• Bottle Capacity: 6 oz (Approximately 180 mL)

• Bottle Color: Blue

• Bottle Shape: Square

• Bottle Material: Static-Dissipative High-Density Polyethylene (HDPE)

• Pump Material: Stainless Steel

• Pump Type: Take-Along Locking Pump

• Dispensing Volume: Approximately 0.2 cc (0.2 mL) Per Press

• Pump Operation: Manual, One-Handed

• Dispensing Surface: Dish-Shaped Reservoir

• Locking Mechanism: Yes

• Liquid Return Feature: Center Opening Allows Excess Liquid to Drain Back into Bottle

• Pump Lid: Spring-Loaded, Stays Open or Closed

• Volume Markings: Graduated Markings on One Side

• ESD Identification: Embossed ESD Protective Symbol

• Surface Resistance (Rtt): 1 × 10⁴ to Less Than 1 × 10¹¹ Ohms

• Surface Resistance Test Standard: ANSI/ESD STM11.12

• Charge Decay: Less Than 2 Seconds

• Charge Decay Test Standard: IEC 61340-2-3:2016

• Bottle Neck / Closure Size: 38-400

• Overall Height: Approximately 4.2" (106.7 mm)

• Width: Approximately 2-1/8" (54 mm)

• Depth: Approximately 2-1/8" (54 mm)

• Package Quantity: 1 Complete Bottle with Pump

• Country of Origin: United States

Ideal For

• ESD-protected electronics workstations

• Printed circuit board assembly and repair

• Precision electronics cleaning

• Electronics manufacturing and inspection

• Field service technicians

• Mobile electronics repair kits

• Transporting compatible cleaning liquids between workstations

• Semiconductor handling environments

• Moistening cotton swabs and lint-free cleaning wipes

• Laboratory and technical workstations

• Precision equipment maintenance

• Applications where a locking pump and liquid-return design are preferred

Take-Along Locking Pump for Travel and Storage

The stainless steel Take-Along pump combines convenient dispensing with a locking mechanism designed to help prevent leaks when engaged.

This makes it a practical choice for field service technicians who carry cleaning liquids in service kits or move between work locations.

The locking design also provides additional security when storing the bottle between uses.

Unlike the non-locking One-Touch pump, the Take-Along model is specifically designed for applications where portability and secure storage are important.

Liquid Return Design

The Take-Along pump features an opening in the center of its dispensing dish that allows excess liquid to drain back into the bottle.

Each press delivers approximately 0.2 cc of liquid into the reservoir, where it can be applied to a suitable swab, wipe, or other applicator.

Liquid remaining in the dish can return to the container, reducing the amount left exposed at the dispensing surface.

Because liquid can flow back into the bottle, this design is best suited to applications where return flow is acceptable.

For applications where unused liquid must remain separated from the dispensing surface, Menda's Pure-Take pump offers a locking design with non-return protection.

durAstatic Protection for Sensitive Electronics

The blue durAstatic bottle provides long-lasting static-dissipative properties designed to help control electrostatic discharge around sensitive electronic components.

Its specified surface resistance range is 1 × 10⁴ to less than 1 × 10¹¹ ohms, tested according to ANSI/ESD STM11.12.

The bottle also has a charge decay time of less than two seconds, tested according to IEC 61340-2-3:2016.

These properties help reduce static charge accumulation in properly managed ESD-protected work environments.

The durAstatic material contains no migratory antistatic additives, helping minimize the potential for contamination from the bottle.

Convenient One-Handed Dispensing

The Take-Along pump allows you to dispense small quantities of liquid using one hand.

Each press delivers approximately 0.2 cc into the dish-shaped reservoir, making it easy to moisten a suitable applicator without pouring directly from the bottle.

This is particularly convenient when working with delicate electronic assemblies or performing detailed cleaning tasks.

Spring-Loaded Lid Helps Reduce Evaporation

The stainless steel pump includes a spring-loaded lid that can remain open or closed.

Keeping the lid closed between uses helps minimize evaporation and odors from compatible cleaning liquids.

The lid also covers the dispensing reservoir when the bottle is not in use.

Graduated Markings for Easy Monitoring

The 6 oz bottle features graduated markings along one side, allowing you to estimate the amount of liquid remaining without opening the container.

These markings are useful for monitoring cleaning fluid supplies at workstations or in field service kits.

The embossed ESD protective symbol provides additional identification for static-controlled environments.

Compact Square Bottle Design

The square HDPE bottle provides a convenient shape for electronics benches, work carts, and service kits.

Its compact design makes it easy to position alongside tools, cleaning supplies, and inspection equipment.

The blue color also makes it easy to distinguish from other dispensing bottles when multiple cleaning fluids are used.

Chemical Compatibility

The dispenser is intended for use with compatible cleaning fluids and other liquids.

Chemical compatibility depends on the specific formulation and all components of the dispensing assembly.

Verify compatibility before filling the bottle with alcohol, solvents, or other chemicals.

The bottle is supplied empty and does not include cleaning liquid.

Frequently Asked Questions

What is the Menda 35287 used for?

It is an ESD-safe dispensing bottle designed for applying compatible cleaning fluids at static-sensitive workstations and for transporting liquids in field service applications.

How much liquid does the bottle hold?

The bottle has a 6 oz capacity, approximately 180 mL.

What color is the bottle?

The bottle is blue.

What type of pump does it use?

It features a stainless steel Menda Take-Along locking pump.

Does the pump lock?

Yes. The Take-Along pump includes a locking mechanism designed to prevent leaks when engaged.

Is the bottle suitable for field service kits?

Yes. Its locking pump makes it particularly useful for field service kits and transporting compatible cleaning liquids.

What is the difference between Menda 35286 and 35287?

Both are blue 6 oz durAstatic bottles with locking pumps. Model 35286 uses a Pure-Take pump that prevents dispensed liquid from returning to the container. Model 35287 uses a Take-Along pump that allows excess liquid to drain back into the bottle.

What is the difference between Take-Along and One-Touch pumps?

Both allow excess liquid to return to the bottle. The Take-Along pump also includes a locking mechanism for travel and storage.

What is the difference between Take-Along and Pure-Take pumps?

Both feature locking mechanisms. The Take-Along pump allows excess liquid to return to the bottle, while the Pure-Take pump includes a purity protector that prevents return flow.

Does the Take-Along pump prevent liquid from returning to the bottle?

No. An opening in the center of the dispensing dish allows excess liquid to drain back into the container.

How much liquid does each pump press dispense?

Approximately 0.2 cc, equivalent to 0.2 mL, per press.

Can I operate the pump with one hand?

Yes. The pump is designed for convenient one-handed operation.

Does the pump have a dispensing dish?

Yes. It features a dish-shaped reservoir for applying liquid to suitable applicators.

What is the bottle made from?

It is made from Menda's static-dissipative durAstatic HDPE material.

What makes this bottle ESD-safe?

The durAstatic material provides static-dissipative properties designed to help control static buildup around sensitive electronic components.

What is the bottle's surface resistance?

The specified resistance range is 1 × 10⁴ to less than 1 × 10¹¹ ohms.

Does the bottle contain migratory antistatic additives?

No. Menda's durAstatic material is designed without migratory antistatic additives.

Does the lid stay open?

Yes. The spring-loaded lid can remain open or closed.

Does the lid help reduce evaporation?

Yes. Closing the lid helps minimize evaporation and odors between uses.

Does the bottle have measurement markings?

Yes. Graduated markings along one side allow you to estimate the remaining liquid volume.

How tall is the bottle?

The overall height is approximately 4.2 inches (106.7 mm).

Is the bottle marked with an ESD symbol?

Yes. It features an embossed ESD protective symbol.

Can I use it with isopropyl alcohol?

It may be used with compatible alcohol formulations. Verify compatibility with the complete bottle and pump assembly before use.

Can it be used for electronics cleaning?

Yes. It is designed for use in electronics work environments where ESD control is important.

Can the bottle be refilled?

Yes. It can be reused with compatible liquids when properly cleaned and maintained.

Does the bottle come filled with liquid?

No. This listing is for the empty dispensing bottle with its pump.

How many bottles are included?

One complete bottle with stainless steel Take-Along pump is included.

Where is this product manufactured?

It is made in the United States.

Micro-Tools makes every attempt to provide accurate information for each item. Actual packaging and/or specifications may be slightly different from the information and picture provided.