Menda 6 oz Blue durAstatic ESD-Safe Isopropanol (IPA) Dispensing Bottle with One-Touch Pump – 35299
Keep isopropyl alcohol clearly identified and conveniently accessible with this 6 oz blue durAstatic dispensing bottle from Menda. Designed for ESD-protected workstations, this dispenser combines a static-dissipative HDPE bottle with a stainless steel One-Touch pump for convenient, controlled dispensing during electronics cleaning, assembly, and precision maintenance.
The bottle is printed with “Isopropanol” to help distinguish its intended contents from other cleaning liquids used at the workstation. Its blue color provides additional visual identification when multiple dispensing bottles are used in the same work area.
Manufactured from Menda's durAstatic HDPE material, the bottle provides long-lasting static-dissipative properties without migratory antistatic additives. This helps reduce static charge accumulation around sensitive electronic components while minimizing the potential for contamination from the bottle material.
The stainless steel One-Touch pump dispenses approximately 0.2 cc of liquid per press into a dish-shaped reservoir. This makes it easy to moisten cotton swabs, lint-free wipes, and other suitable cleaning applicators without pouring liquid directly from the bottle.
An opening in the center of the dispensing dish allows excess liquid to drain back into the container. This return-flow design is convenient for routine cleaning applications where separation between dispensed and unused liquid is not required.
The spring-loaded stainless steel lid stays open or closed as needed, helping minimize evaporation and odors between uses. Graduated markings along one side of the bottle allow you to estimate the remaining liquid level.
An embossed ESD protective symbol identifies the bottle for static-controlled environments, while its compact square design provides a convenient footprint for electronics benches and assembly stations.
Made in the USA, this reusable dispenser is a practical choice for electronics repair, circuit board cleaning, precision maintenance, and other applications requiring clearly identified isopropanol dispensing.
Features & Benefits
-
6 oz Capacity: Holds approximately 180 mL of compatible cleaning liquid.
-
Printed “Isopropanol” Identification: Clearly identifies the bottle's intended contents.
-
Blue durAstatic HDPE Bottle: Static-dissipative construction designed for use around sensitive electronic components.
-
Stainless Steel One-Touch Pump: Durable dispensing mechanism for repeated workstation use.
-
Approximately 0.2 cc Per Press: Delivers small quantities of liquid with each pump operation.
-
Dish-Shaped Dispensing Reservoir: Convenient for moistening cotton swabs, lint-free wipes, and other suitable applicators.
-
Liquid Return Opening: Allows excess liquid in the dispensing dish to drain back into the bottle.
-
One-Handed Operation: Makes dispensing convenient during precision cleaning and repair.
-
Long-Lasting ESD Properties: Helps control static charge accumulation in ESD-protected work environments.
-
No Migratory Antistatic Additives: Helps minimize the potential for contamination from the bottle material.
-
Spring-Loaded Lid: Stays open or closed and helps minimize evaporation and odors.
-
Graduated Volume Markings: Allows easy monitoring of the approximate remaining liquid.
-
Embossed ESD Protective Symbol: Identifies the bottle for use in static-controlled work areas.
-
Square Bottle Design: Convenient shape for electronics benches and assembly stations.
-
Made in the USA: Manufactured in the United States.
Specifications
-
Brand: Menda
-
Manufacturer Part Number: 35299
-
SKU: 35299
-
Product Series: durAstatic
-
Pump Series: One-Touch
-
Product Type: ESD-Safe Liquid Dispensing Bottle
-
Bottle Capacity: 6 oz (Approximately 180 mL)
-
Bottle Color: Blue
-
Bottle Shape: Square
-
Bottle Material: Static-Dissipative High-Density Polyethylene (HDPE)
-
Printed Identification: Isopropanol (IPA)
-
Pump Material: Stainless Steel
-
Pump Type: One-Touch
-
Dispensing Volume: Approximately 0.2 cc (0.2 mL) Per Press
-
Pump Operation: Manual, One-Handed
-
Dispensing Surface: Dish-Shaped Reservoir
-
Liquid Return Feature: Center Opening Allows Excess Liquid to Drain Back into Bottle
-
Pump Lid: Spring-Loaded, Stays Open or Closed
-
Volume Markings: Graduated Markings on One Side
-
ESD Identification: Embossed ESD Protective Symbol
-
Surface Resistance (Rtt): 1 × 10⁴ to Less Than 1 × 10¹¹ Ohms
-
Surface Resistance Test Standard: ANSI/ESD STM11.12
-
Charge Decay: Less Than 2 Seconds
-
Charge Decay Test Standard: IEC 61340-2-3:2016
-
Overall Height: Approximately 4.2" (106.7 mm)
-
Package Quantity: 1 Complete Bottle with Pump
-
Country of Origin: United States
Ideal For
-
ESD-protected electronics workstations
-
Printed circuit board assembly and repair
-
Precision electronics cleaning
-
Electronics manufacturing and inspection
-
Clearly identified isopropyl alcohol dispensing
-
Moistening compatible cleaning swabs and wipes
-
Laboratory and technical workstations
-
Precision equipment maintenance
-
Workstations using multiple cleaning solvents
-
Applications requiring controlled dispensing of small liquid quantities
Printed Isopropanol Identification
The bottle is clearly printed with “Isopropanol,” making it easy to distinguish from acetone and other cleaning solvents at the workstation.
This is especially useful in electronics repair and manufacturing environments where several cleaning liquids are used side by side.
The printed identification helps reduce the chance of selecting the wrong dispensing bottle during routine cleaning and maintenance.
The blue bottle color provides additional visual distinction, while the embossed ESD protective symbol identifies its static-dissipative construction.
Stainless Steel One-Touch Pump
The stainless steel One-Touch pump provides convenient access to small quantities of liquid without pouring directly from the container.
Each press dispenses approximately 0.2 cc into the dish-shaped reservoir.
This makes it easy to moisten a suitable cotton swab, cleaning wipe, or other applicator while keeping the bottle positioned on the work surface.
The pump is designed for one-handed operation, making it convenient for detailed cleaning and precision maintenance.
Liquid Return Opening
The One-Touch pump features an opening in the center of its dispensing dish that allows excess liquid to drain back into the bottle.
This design reduces the amount of liquid remaining exposed in the dispensing reservoir.
Because liquid can return to the container, this pump is best suited to applications where return flow is acceptable.
For applications where dispensed liquid must remain separated from unused contents, Menda's Pure-Touch or Pure-Take non-return pump designs may be more suitable.
durAstatic Protection for Sensitive Electronics
The blue durAstatic bottle provides long-lasting static-dissipative properties designed to help control electrostatic discharge around sensitive electronic components.
Its specified surface resistance range is 1 × 10⁴ to less than 1 × 10¹¹ ohms, tested according to ANSI/ESD STM11.12.
The bottle also has a charge decay time of less than two seconds, tested according to IEC 61340-2-3:2016.
These properties help reduce static charge accumulation in properly managed ESD-protected work environments.
The durAstatic material contains no migratory antistatic additives, helping minimize the potential for contamination from the bottle.
Spring-Loaded Lid Helps Reduce Evaporation
The stainless steel pump includes a spring-loaded lid that can remain open or closed.
Keeping the lid closed between uses helps minimize evaporation and odors from the liquid inside.
The lid also covers the dispensing reservoir when the bottle is not in use, making it convenient for workstations where cleaning fluids are accessed frequently.
Graduated Markings for Easy Monitoring
The 6 oz bottle features graduated markings along one side, allowing you to estimate the amount of liquid remaining without opening the container.
These markings are useful for monitoring cleaning fluid supplies at frequently used workstations.
Chemical Compatibility and Safe Use
This dispenser is intended for compatible cleaning liquids, including isopropyl alcohol formulations suitable for the complete bottle and pump assembly.
Isopropyl alcohol is flammable and should be used with appropriate ventilation, away from heat, sparks, and ignition sources.
Always confirm that the cleaning liquid is compatible with the materials being cleaned and follow the chemical manufacturer's safety instructions.
The bottle is supplied empty and does not include isopropyl alcohol or any other cleaning liquid.
Frequently Asked Questions
What is the Menda 35299 used for?
It is an ESD-safe dispensing bottle printed “Isopropanol,” designed for controlled dispensing of compatible cleaning liquids at electronics workstations and other technical work areas.
How much liquid does the bottle hold?
The bottle has a 6 oz capacity, approximately 180 mL.
What color is the bottle?
The bottle is blue.
Is the bottle printed with a chemical name?
Yes. It is printed with “Isopropanol.”
What does IPA stand for?
IPA stands for isopropyl alcohol, also known as isopropanol.
Does the bottle come filled with isopropyl alcohol?
No. The bottle is supplied empty with its stainless steel dispensing pump.
What is the difference between Menda 35298 and 35299?
Both are blue 6 oz durAstatic bottles with One-Touch pumps. Model 35298 is printed “Acetone,” while model 35299 is printed “Isopropanol.”
What type of pump does it use?
It features a stainless steel Menda One-Touch pump.
How much liquid does each pump press dispense?
Approximately 0.2 cc, equivalent to 0.2 mL, per press.
Does the pump allow excess liquid to return to the bottle?
Yes. An opening in the center of the dispensing dish allows excess liquid to drain back into the container.
Does the pump prevent liquid from returning to the bottle?
No. This One-Touch pump allows return flow. Menda's Pure-Touch and Pure-Take pumps feature non-return protection.
Does the pump lock?
No. This model uses a standard One-Touch pump rather than a locking Take-Along or Pure-Take pump.
Can the pump be operated with one hand?
Yes. It is designed for convenient one-handed dispensing.
Does the pump have a dispensing dish?
Yes. The dish-shaped reservoir allows liquid to be applied to suitable cleaning swabs and wipes.
What is the bottle made from?
It is made from Menda's static-dissipative durAstatic HDPE material.
What makes the bottle ESD-safe?
The durAstatic material provides static-dissipative properties designed to help control static charge accumulation around sensitive electronic components.
What is the bottle's surface resistance?
The specified resistance range is 1 × 10⁴ to less than 1 × 10¹¹ ohms.
Does the bottle contain migratory antistatic additives?
No. Menda's durAstatic material is designed without migratory antistatic additives.
Does the lid stay open?
Yes. The spring-loaded lid can remain open or closed.
Does the lid help reduce evaporation?
Yes. Keeping the lid closed helps minimize evaporation and odors between uses.
Does the bottle have graduated markings?
Yes. Graduated markings along one side allow you to estimate the remaining liquid volume.
How tall is the bottle?
The overall height is approximately 4.2 inches (106.7 mm).
Is the bottle marked with an ESD symbol?
Yes. It features an embossed ESD protective symbol.
Can the bottle be used for electronics cleaning?
Yes. It is designed for ESD-protected work environments. Always confirm that the cleaning liquid is compatible with the components and materials being cleaned.
Can the bottle be refilled?
Yes. It can be reused with compatible liquids when properly cleaned and maintained.
Can I use other solvents in this bottle?
The bottle is printed for isopropanol identification. Chemical compatibility should be verified before use, and the bottle should always be accurately labeled for its actual contents.
How many bottles are included?
One complete bottle with stainless steel One-Touch pump is included.
Where is this product manufactured?
It is made in the United States.
| SKU: | 35299 |
| UPC: | 196943988168 |
| BRAND: | Menda |
| MPN: | 35299 |
| Made In: | United States |
