Menda 6 oz Blue durAstatic ESD-Safe Flux Remover Bottle with One-Touch Pump – 35594
Keep flux remover readily accessible at your electronics workstation with this 6 oz blue durAstatic dispensing bottle from Menda. Featuring a stainless steel One-Touch pump and a static-dissipative HDPE bottle, this dispenser provides convenient, controlled application of compatible flux-removing solutions while helping protect static-sensitive electronic components.
The bottle is clearly printed with "Flux Remover" for easy identification. Its blue color makes it simple to distinguish from other chemical dispensers, helping keep workstations organized during electronics assembly, printed circuit board cleaning, soldering, and repair.
Menda's durAstatic technology incorporates long-lasting static-dissipative properties into the bottle material. Unlike containers that rely on topical antistatic treatments, durAstatic bottles contain no migratory additives that could leave unwanted residue or contaminate work surfaces.
The stainless steel One-Touch pump dispenses approximately 0.2 cc of liquid with each press. Its dish-shaped dispensing reservoir makes it easy to moisten cotton swabs, cleaning pads, and other compatible applicators without pouring directly from the bottle.
A return-flow opening in the center of the dispensing dish allows excess liquid to drain back into the bottle. This convenient design helps minimize liquid remaining in the pump reservoir between uses.
The pump also features a spring-loaded hinged lid that stays open during dispensing and closed when not in use, helping reduce evaporation and odors.
Manufactured in the United States, this complete Menda dispenser combines ESD protection, controlled liquid application, and clearly identified chemical storage in a compact, refillable design.
Features & Benefits
-
6 oz Capacity: Holds approximately 177 mL of compatible flux remover or other suitable liquids.
-
Blue durAstatic Bottle: Static-dissipative HDPE construction for ESD-controlled workstations.
-
Preprinted "Flux Remover" Label: Clearly identifies the bottle's intended contents.
-
Stainless Steel One-Touch Pump: Provides convenient, controlled liquid dispensing.
-
Approximately 0.2 cc Per Press: Dispenses small amounts of liquid to the pump reservoir.
-
Return-Flow Design: Allows excess liquid to drain back into the bottle.
-
One-Handed Operation: Convenient for moistening swabs and cleaning applicators.
-
Spring-Loaded Hinged Lid: Stays open or closed and helps minimize evaporation and odors.
-
Built-In Static Dissipation: Provides long-lasting ESD properties without topical treatments.
-
No Migratory Additives: Helps reduce the potential for unwanted surface residue.
-
Embossed ESD Protective Symbol: Clearly identifies the container for static-control environments.
-
Square Bottle Design: Provides a stable footprint on workbenches.
-
Refillable Construction: Suitable for repeated use with compatible liquids.
-
Made in the USA: Genuine Menda dispenser manufactured in the United States.
Specifications
-
Brand: Menda
-
Manufacturer Part Number: 35594
-
SKU: 35594
-
Product Type: ESD-Safe Liquid Dispensing Bottle
-
Series: durAstatic One-Touch
-
Capacity: 6 oz (Approximately 177 mL)
-
Bottle Material: High-Density Polyethylene (HDPE)
-
Bottle Color: Blue
-
Bottle Shape: Square
-
Bottle Printing: Flux Remover
-
Bottle ESD Property: Static Dissipative
-
Pump Type: One-Touch
-
Pump Material: Stainless Steel
-
Pump Operation: Manual, One-Handed
-
Dispensing Volume: Approximately 0.2 cc (0.2 mL) Per Press
-
Dispensing Surface: Dish-Shaped Reservoir
-
Liquid Return: Yes — Return-Flow Design
-
Pump Lid: Spring-Loaded Hinged Lid
-
Resistance (Rtt): 1 × 10⁴ to less than 1 × 10¹¹ ohms
-
Resistance Test Standard: ANSI/ESD STM11.12
-
Charge Decay: Less Than 2 Seconds
-
Charge Decay Test Standard: IEC 61340-2-3:2016
-
Migratory Antistatic Additives: None
-
ESD Protective Symbol: Embossed on Bottle
-
Bottle Height: Approximately 4.2" (107 mm)
-
Package Quantity: 1 Complete Dispenser
-
Country of Origin: United States
Ideal For
-
Electronics assembly and manufacturing
-
Printed circuit board (PCB) cleaning
-
Flux residue removal after soldering
-
Electronics repair and rework
-
ESD-controlled production areas
-
Cleaning around static-sensitive components
-
Precision maintenance workstations
-
Moistening cotton swabs and cleaning pads
-
Dispensing compatible flux-removing solutions
-
Technical laboratories and service departments
-
Workstations requiring clearly identified chemical dispensers
durAstatic ESD Protection
Menda's durAstatic technology provides static-dissipative performance through the material used to manufacture the bottle.
The HDPE container is designed for use around static-sensitive printed circuitry and other electronic components.
Unlike bottles that rely on topical antistatic coatings, durAstatic containers contain no migratory additives that could leave residue on the bottle surface.
The bottle's specified resistance is 1 × 10⁴ to less than 1 × 10¹¹ ohms when tested according to ANSI/ESD STM11.12.
It also provides a charge decay time of less than 2 seconds when tested according to IEC 61340-2-3:2016.
An embossed ESD protective symbol makes the bottle easy to identify at static-control workstations.
Stainless Steel One-Touch Pump
The One-Touch pump is designed to dispense small quantities of liquid with a simple press.
Each press delivers approximately 0.2 cc of liquid into the dish-shaped dispensing reservoir.
This makes it easy to moisten cotton swabs, cleaning pads, or other compatible applicators without pouring liquid directly from the bottle.
One-handed operation leaves your other hand available for holding components, tools, or cleaning materials.
The stainless steel construction provides durability and corrosion resistance when used with compatible liquids.
Convenient Return-Flow Design
The One-Touch pump features a return-flow opening in the center of the dispensing dish.
After liquid has been dispensed, excess fluid can drain back into the bottle through this opening.
This helps prevent unnecessary liquid accumulation in the dispensing reservoir between uses.
Because liquid can return to the bottle, this pump is best suited for applications where return flow is acceptable.
For applications requiring a non-return design to help protect stored liquids from contamination, Menda also offers Pure-Touch dispensing pumps.
Preprinted "Flux Remover" Identification
The bottle is clearly printed with "Flux Remover" to identify its intended contents.
This makes it convenient for electronics workstations where multiple dispensing bottles are used for different cleaning and maintenance tasks.
The blue bottle also provides a visual distinction from other Menda durAstatic colors.
Clear identification helps technicians quickly locate the appropriate dispensing bottle during soldering, PCB cleaning, and repair work.
Always verify the actual contents before use and follow applicable workplace chemical-labeling requirements.
Spring-Loaded Hinged Lid
The stainless steel pump includes a spring-loaded hinged lid designed to stay open during dispensing and closed between uses.
Closing the lid helps reduce exposure to dust and airborne contaminants.
It also helps minimize evaporation and odors compared with leaving the dispensing reservoir uncovered.
This makes the dispenser convenient for workstations where cleaning liquids are used repeatedly throughout the day.
Durable 6 oz HDPE Bottle
The blue bottle is manufactured from high-density polyethylene (HDPE), providing a lightweight and durable alternative to glass.
Its square design offers a stable base for use on workbenches and laboratory counters.
The 6 oz capacity provides a practical supply of cleaning liquid without requiring a large container at the workstation.
The bottle can be refilled with compatible liquids when properly cleaned and maintained.
Chemical Compatibility and Safe Use
This dispenser is intended for compatible flux-removing solutions and other suitable liquids.
Chemical compatibility depends on the complete assembly, including the HDPE bottle, stainless steel pump, internal components, and seals.
Always verify compatibility with the specific chemical before filling the bottle.
For flammable cleaning solvents, follow the manufacturer's handling instructions, provide appropriate ventilation, and keep the dispenser away from heat, sparks, and other ignition sources.
Keep the pump clean and free from dried residue to maintain consistent operation.
Although the bottle is printed "Flux Remover," it is supplied empty and does not include cleaning liquid.
Frequently Asked Questions
What is the Menda 35594 used for?
It is an ESD-safe dispensing bottle designed for controlled application of compatible flux-removing solutions and other suitable liquids during electronics cleaning and maintenance.
How much liquid does the bottle hold?
The bottle has a 6 oz capacity, approximately 177 mL.
What color is the bottle?
The bottle is blue.
What material is the bottle made from?
It is manufactured from high-density polyethylene (HDPE).
What is printed on the bottle?
The bottle is preprinted with "Flux Remover."
Does the bottle come filled with flux remover?
No. It is supplied empty.
What is durAstatic?
durAstatic is Menda's static-dissipative bottle technology, designed for use around static-sensitive electronic components.
Is this dispenser ESD-safe?
Yes. The durAstatic bottle is designed for use in ESD-controlled environments.
Are the static-dissipative properties built into the bottle?
Yes. The bottle provides long-lasting dissipative properties without relying on topical antistatic treatments.
Does the bottle contain migratory antistatic additives?
No. Menda specifies that durAstatic bottles contain no migratory additives.
What is the bottle's resistance rating?
The specified resistance is 1 × 10⁴ to less than 1 × 10¹¹ ohms, tested according to ANSI/ESD STM11.12.
What is the charge decay time?
Menda specifies a charge decay time of less than 2 seconds, tested according to IEC 61340-2-3:2016.
Does the bottle have an ESD protective symbol?
Yes. The ESD protective symbol is embossed on the bottle.
What type of pump does the dispenser use?
It features a stainless steel Menda One-Touch pump.
How much liquid does each pump press dispense?
Approximately 0.2 cc, equivalent to 0.2 mL, per press.
Can the pump be operated with one hand?
Yes. The One-Touch pump is designed for convenient one-handed operation.
Does the pump have a dispensing reservoir?
Yes. The dish-shaped reservoir is designed for moistening compatible cleaning applicators.
Does excess liquid return to the bottle?
Yes. An opening in the center of the dispensing dish allows excess liquid to drain back into the container.
What is the difference between One-Touch and Pure-Touch pumps?
One-Touch pumps allow excess liquid to return to the bottle. Pure-Touch pumps prevent return flow to help protect the stored liquid from contamination.
Does the pump have a lid?
Yes. The stainless steel pump includes a spring-loaded hinged lid.
Does the lid help reduce evaporation?
Yes. Closing the lid helps minimize evaporation and odors when the dispenser is not in use.
Can I use cotton swabs with this dispenser?
Yes. The dispensing reservoir is suitable for moistening cotton swabs and other compatible cleaning applicators.
Can this bottle be used for PCB cleaning?
Yes. It is suitable for dispensing compatible flux-removing solutions during printed circuit board cleaning and repair.
Can it be used around static-sensitive components?
Yes. The durAstatic bottle is designed for use in ESD-controlled electronics environments.
Can it be used with isopropyl alcohol?
It may be used with compatible isopropyl alcohol formulations when the complete dispensing assembly is suitable for the liquid.
Can it be used with other cleaning solvents?
Yes, provided the chemical is compatible with the HDPE bottle and all pump components.
Is the bottle reusable?
Yes. It can be refilled and reused with compatible liquids when properly cleaned and maintained.
What shape is the bottle?
It has a square design that provides a stable footprint on work surfaces.
How tall is the bottle?
The bottle is approximately 4.2 inches (107 mm) tall.
Is the pump included?
Yes. The product includes the blue durAstatic bottle and stainless steel One-Touch pump assembly.
How many dispensers are included?
One complete dispensing bottle with pump is included.
Where is the Menda 35594 manufactured?
It is made in the United States.
| SKU: | 35594 |
| UPC: | 363674132522 |
| Brand: | Menda |
| MPN: | 35594 |
| Made In: | United States |
