Menda 6" Fiberglass-Filled Nylon Point-Blade Spudger & Probe, Black – 35622

Open electronic housings, position small components, and guide wires with precision using this versatile nylon point-blade probe from Menda. Commonly known as a black stick or spudger, this 6-inch double-ended tool combines a pointed probe, a flat blade, and a convenient wire-handling notch in one lightweight design.

Manufactured from 15% glass-filled supertough nylon, the probe offers the strength and rigidity needed for everyday electronics assembly, repair, and maintenance. Its nonmetallic construction provides a gentler alternative to metal picks and screwdrivers when working around delicate plastic housings, connectors, and electronic components.

The pointed end is useful for positioning small parts, guiding component leads, and holding objects during soldering preparation. The flat blade end helps separate plastic housings, lift small components, and press wire leads into position on circuit boards.

A molded notch provides an additional way to hook and pull wires or small components, making the tool especially convenient for detailed work in confined spaces.

The nylon material is temperature-resistant and may be suitable for use in ESD-protected areas when properly conditioned. Because nylon's electrical properties depend on moisture content and handling conditions, appropriate ESD procedures should always be followed when working around static-sensitive components.

Made in the United States, this versatile Menda probe is an essential addition to electronics repair benches, assembly stations, and precision toolkits.

Features & Benefits

• 6-Inch Point-Blade Probe: Versatile double-ended design for electronics assembly and repair.

• Pointed Probe Tip: Useful for positioning components, guiding leads, and reaching confined areas.

• Flat Blade Tip: Helps open plastic housings, separate small parts, and position wires.

• Built-In Wire Notch: Provides a convenient feature for hooking and pulling wires or components.

• 15% Glass-Filled Nylon: Reinforced construction provides strength and rigidity.

• Nonmetallic Material: A practical alternative to metal picks and screwdrivers.

• Non-Marring Nylon Finish: Helps reduce the risk of marking delicate surfaces during careful use.

• Temperature-Resistant Construction: Suitable for appropriate soldering-related handling tasks.

• Compact Double-Ended Design: Combines multiple useful functions in one tool.

• Lightweight and Reusable: Convenient for repeated assembly and repair work.

• Suitable for Certain ESD-Protected Applications: Nylon's moisture-absorbing properties can support use around sensitive electronics when properly conditioned.

• Made in the USA: Manufactured by Menda in the United States.

Specifications

• Brand: Menda

• Manufacturer Part Number: 35622

• SKU: 35622

• Product Type: Nylon Point-Blade Probe / Spudger

• Material: 15% Glass-Filled Supertough Nylon

• Color: Black

• Overall Length: Approximately 6" (154.7 mm)

• Tool Design: Double-Ended

• First Tip: Pointed Probe

• Second Tip: Flat Blade

• Additional Feature: Molded Wire-Hooking Notch

• Construction: Nonmetallic

• Temperature Resistance: Temperature-Resistant Nylon

• Material Melting Point: Approximately 450°F (232°C)

• ESD Suitability: Conditional; Depends on Moisture Content and Treatment

• Power Required: No

• Package Quantity: 1 Probe

• Country of Origin: United States

Ideal For

• Opening plastic electronic housings

• Smartphone and tablet repair

• Laptop and computer maintenance

• Electronics assembly and rework

• Printed circuit board (PCB) handling

• Guiding wires and component leads

• Positioning small electronic components

• Removing accessible batteries

• Separating plastic covers and clips

• Soldering preparation

• Connector and cable maintenance

• Precision mechanical work

• Electronics technicians and hobbyists

Double-Ended Point-Blade Design

The combination of a pointed probe and flat blade makes this tool useful for a wide range of detailed tasks.

Pointed Probe End

The tapered point provides precise access to small spaces and components.

It is useful for guiding wires, positioning component leads, manipulating small parts, and holding objects in place during soldering preparation.

The pointed design allows more precise positioning than a broad pry tool.

Flat Blade End

The flat blade provides a wider contact surface for gently separating plastic parts, pressing wire leads into position, and lifting components where appropriate.

It can also assist with opening snap-fit plastic housings when used carefully.

The blade should be used with controlled pressure to avoid damaging clips, circuit boards, or delicate finishes.

Built-In Wire-Hooking Notch

A molded notch provides an additional feature for handling wires and small components.

The notch can be used to hook and pull accessible wires or component leads during assembly and maintenance.

This is particularly convenient when working inside compact electronic housings or around crowded circuit boards.

The combination of pointed, flat, and notched working surfaces reduces the need to switch between several small hand tools.

15% Glass-Filled Supertough Nylon

The probe is manufactured from nylon reinforced with 15% glass fibers.

This construction provides additional rigidity and durability compared with ordinary unfilled nylon.

The nonmetallic working surfaces make the probe useful for handling components and plastic housings where metal tools may be undesirable.

Menda describes the nylon finish as non-marring, making it a practical choice for careful work around delicate surfaces.

However, any hand tool can cause damage if excessive force is applied or abrasive debris becomes trapped between the tool and the workpiece.

Opening Plastic Electronic Housings

Many electronic devices use plastic housings secured with clips or snap-fit connections.

The flat blade can help separate accessible housing edges without relying on a metal screwdriver.

The pointed end is useful for positioning small internal parts after the housing has been opened.

Applications include smartphones, laptops, portable electronics, and other devices with suitable plastic enclosures.

Always follow the equipment manufacturer's disassembly instructions, disconnect power, and avoid excessive prying force.

Useful for PCB Assembly and Soldering Preparation

The probe is useful for guiding component leads and positioning small parts on printed circuit boards.

The flat blade can help press suitable wire leads into position, while the pointed tip provides more precise control around closely spaced components.

Its nylon construction provides a nonmetallic alternative to conventional steel picks.

The tool is temperature-resistant, but it should not be used in direct contact with molten solder or a soldering iron tip.

The material's approximate 450°F melting point is not a recommended operating temperature.

ESD-Protected Workstation Considerations

Menda identifies this nylon probe as potentially suitable for use in ESD-protected areas under appropriate conditions.

Nylon is hygroscopic, meaning it absorbs moisture from its surroundings.

According to Menda, handling the tool with bare hands for several minutes can allow it to absorb sufficient moisture to become suitable for certain applications around ESD-sensitive components.

Without moisture exposure or antistatic treatment, nylon can remain in the electrically insulative resistance range and may retain electrostatic charge.

In clean environments where gloves are worn, Menda specifies that topical antistatic treatment is required before use around sensitive components.

Always follow your facility's ESD-control procedures and verify the tool's suitability for the specific work environment.

Temperature-Resistant Construction

The fiberglass-filled nylon material is designed to tolerate elevated temperatures encountered during suitable electronics handling tasks.

The manufacturer identifies an approximate material melting point of 450°F (232°C).

This does not mean the probe can safely withstand continuous exposure to that temperature or direct contact with soldering equipment.

For best results, use the tool for positioning and handling rather than direct contact with hot soldering iron tips or molten solder.

Care and Maintenance

Keep the probe clean and free from adhesive, flux residue, and abrasive particles that could transfer to electronic components.

Inspect the pointed tip, blade, and notch periodically for wear, cracks, or deformation.

Avoid excessive prying force, especially when opening tightly secured plastic housings.

Do not use the probe as a substitute for a certified insulated electrical tool.

Disconnect power before servicing equipment and follow appropriate precautions for batteries, capacitors, and static-sensitive components.

Frequently Asked Questions

What is Menda 35622?

It is a 6-inch black nylon point-blade probe designed for electronics assembly, repair, and precision component handling.

What is a black stick?

A black stick is a nonmetallic probe or spudger commonly used for opening electronic housings and manipulating small components.

How long is the probe?

It is approximately 6 inches long, with a detailed listed length of 6.09 inches (154.7 mm).

What material is the probe made from?

It is manufactured from 15% glass-filled supertough nylon.

Why is the nylon reinforced with glass fibers?

Glass-fiber reinforcement increases rigidity and strength compared with ordinary unfilled nylon.

What color is the tool?

The probe is black.

Does the probe have two working ends?

Yes. It features a pointed probe at one end and a flat blade at the other.

What is the pointed end used for?

The pointed end is useful for guiding wires, positioning components, and manipulating small parts.

What is the flat blade used for?

The flat blade helps separate plastic housings, position wire leads, and perform suitable light-duty prying tasks.

Does the tool have a wire hook?

Yes. A molded notch can be used to hook and pull wires or small components.

Can it be used to open smartphones?

Yes. It is useful for opening suitable plastic electronic housings when used carefully.

Can it be used for laptop repair?

Yes. The probe can help open compatible plastic housings and position internal components.

Can it be used to remove batteries?

Yes. It can assist with removing accessible batteries when appropriate for the device and battery design.

Will the nylon scratch plastic surfaces?

Menda describes the nylon finish as non-marring. However, delicate finishes can still be damaged by excessive force or trapped debris.

Is the tool made from metal?

No. The probe is made from fiberglass-filled nylon.

Is it suitable for PCB work?

Yes. It is useful for appropriate component positioning and wire-handling tasks on printed circuit boards.

Can it be used during soldering?

It is suitable for certain soldering preparation and positioning tasks, but direct contact with hot soldering iron tips or molten solder should be avoided.

Is the tool temperature-resistant?

Yes. Menda identifies the nylon material as temperature-resistant.

What is the melting point of the material?

The manufacturer specifies an approximate melting point of 450°F (232°C).

Can it touch a soldering iron tip?

No. Direct contact with a hot soldering iron tip is not recommended.

Is the probe ESD-safe?

Menda states that it may be suitable for use in ESD-protected areas when properly conditioned. Untreated dry nylon can be electrically insulative.

Why does moisture affect the probe's ESD properties?

Nylon absorbs moisture, which can influence its electrical resistance and charge behavior.

Can it be used around static-sensitive components?

Yes, under appropriate conditions and in accordance with established ESD-control procedures.

Does the probe require antistatic treatment?

In certain clean or glove-handling environments, Menda specifies topical antistatic treatment before use around ESD-sensitive components.

Is it electrically insulated for live electrical work?

No. It is not a certified insulated electrical safety tool and should not be relied upon for protection from electric shock.

Can it be used to pry open plastic clips?

Yes, for suitable light-duty applications. Use controlled pressure to avoid breaking clips or damaging surrounding parts.

Is it reusable?

Yes. The probe is designed for repeated use when properly maintained.

Can the probe be cleaned?

Yes. Remove debris using a cleaning method compatible with nylon and the contaminants involved.

Is it suitable for professional electronics repair?

Yes. It is a practical tool for technicians, electronics assemblers, and service departments.

Can hobbyists use it?

Yes. It is suitable for hobby electronics and appropriate small-component handling tasks.

What is the difference between Menda 35621 and 35622?

Model 35621 is a 5-1/2-inch heavy-duty nylon spudger, while model 35622 is a 6-inch point-blade probe with pointed, flat, and notched working features.

How many probes are included?

One probe is included.

Where is Menda 35622 manufactured?

It is made in the United States.

Micro-Tools makes every attempt to provide accurate information for each item. Actual packaging and/or specifications may be slightly different from the information and picture provided.