Menda 6" Nylon Point-Blade Spudger & Probe, Black – 10 Pack (35622-10)

Equip your electronics repair bench or assembly workstation with this 10-pack of Menda 6-inch nylon point-blade spudgers. Commonly known as black sticks, these versatile double-ended tools feature a pointed probe tip, a flat blade, and a convenient notch for manipulating wires and small components.

Manufactured from fiberglass-filled nylon, each probe combines lightweight handling with the rigidity needed for detailed electronics assembly, repair, and maintenance. The nonmetallic construction makes these tools a practical alternative to metal picks and screwdrivers when working around delicate plastic housings, connectors, and electronic components.

The pointed end provides precise access to confined areas, making it useful for guiding wires, positioning component leads, and manipulating small parts. The flat blade end helps separate plastic housings, lift accessible components, and press wires into position. A molded notch adds versatility for hooking and moving wires during assembly or repair.

The nylon working surfaces are designed to help minimize marks on delicate surfaces during careful use. Fiberglass reinforcement adds strength and durability for repeated workbench tasks.

With 10 individual probes included, this package is convenient for outfitting multiple technicians, maintaining supplies at assembly stations, or keeping replacement tools available.

Made in the United States, these Menda probes are suitable for electronics technicians, service departments, production facilities, and hobbyists who need dependable nonmetallic tools for precision work.

Features & Benefits

• Package of 10: Includes ten individual nylon point-blade probes.

• 6-Inch Length: Compact size provides control during detailed electronics work.

• Double-Ended Design: Combines a pointed probe and flat blade in one tool.

• Pointed Probe Tip: Useful for guiding wires and positioning small components.

• Flat Blade Tip: Helps separate plastic housings and manipulate parts.

• Built-In Wire Notch: Provides an additional feature for hooking and moving wires.

• Fiberglass-Filled Nylon: Reinforced construction adds rigidity and durability.

• Nonmetallic Working Surfaces: Useful where a metal tool may be undesirable.

• Non-Marring Design: Helps reduce the risk of marking delicate surfaces during careful handling.

• Temperature-Resistant Material: Suitable for appropriate electronics assembly and soldering preparation tasks.

• Lightweight Construction: Convenient for repetitive precision work.

• Reusable Tools: Designed for repeated use when properly maintained.

• Made in the USA: Genuine Menda probes manufactured in the United States.

Specifications

• Brand: Menda

• Manufacturer Part Number: 35622-10

• SKU: 35622-10

• Product Type: Nylon Point-Blade Probe / Spudger

• Individual Probe Model: Menda 35622

• Package Quantity: 10 Probes

• Material: Glass-Filled Nylon

• Color: Black

• Overall Length: Approximately 6" (154.7 mm)

• Tool Design: Double-Ended

• First Tip: Pointed Probe

• Second Tip: Flat Blade

• Additional Feature: Molded Wire-Handling Notch

• Construction: Nonmetallic

• Material Property: Temperature-Resistant

• ESD Suitability: Conditional; Depends on Moisture Content or Appropriate Antistatic Treatment

• Power Required: No

• Country of Origin: United States

Ideal For

• Electronics assembly and manufacturing

• Smartphone and tablet repair

• Laptop and computer maintenance

• Opening compatible plastic electronic housings

• Printed circuit board (PCB) assembly and repair

• Guiding wires and component leads

• Positioning small electronic components

• Separating plastic covers and clips

• Removing accessible batteries when appropriate

• Soldering preparation and electronics rework

• Equipping multiple technician workstations

• Repair shops and technical service departments

• Electronics training programs and laboratories

• Keeping spare spudgers available for regular use

Double-Ended Point-Blade Design

Each probe features two working ends designed for different precision tasks.

Pointed Probe End

The pointed tip allows controlled access to small or confined areas.

It is useful for guiding wires, positioning component leads, moving small parts, and performing delicate assembly tasks.

The tapered design makes it easier to reach areas where fingers or larger tools cannot fit.

Flat Blade End

The flat blade provides a broader working surface for separating plastic housings, pressing wires into position, and manipulating accessible components.

It can assist with opening suitable snap-fit enclosures and gently lifting small parts.

Use controlled pressure to avoid damaging plastic clips, circuit boards, or delicate finishes.

Built-In Wire-Handling Notch

A molded notch adds another useful function to each probe.

The notch can help hook, guide, or pull accessible wires during electronics assembly and maintenance.

This feature is particularly useful when working inside compact housings or around crowded circuit boards.

The combination of pointed, flat, and notched working surfaces makes the probe a versatile addition to any precision repair toolkit.

Fiberglass-Filled Nylon Construction

The probes are manufactured from glass-filled nylon, providing added strength and rigidity compared with ordinary unfilled nylon.

This reinforcement makes them useful for repeated component positioning and light-duty separation tasks.

Their nonmetallic working surfaces provide an alternative to steel picks and screwdrivers when handling delicate plastic parts.

The nylon finish is designed to help minimize marking, although excessive force or trapped debris can still damage sensitive surfaces.

Useful for Opening Electronic Housings

Many portable electronic devices use plastic housings secured with clips or snap-fit connections.

The flat blade can help separate accessible housing edges without relying on a metal screwdriver.

These probes are useful for appropriate repair tasks involving smartphones, tablets, laptops, and other electronic devices.

Always follow the equipment manufacturer's disassembly instructions and avoid excessive prying force.

Electronics Assembly and PCB Work

The pointed and flat ends make these probes useful for positioning wires, leads, and small components during electronics assembly.

They can assist with component placement, cable routing, and other mechanical handling tasks on printed circuit boards.

The nonmetallic construction is particularly useful when direct contact with a metal tool is undesirable.

These probes are not certified insulated electrical safety tools. Disconnect power before servicing equipment.

ESD-Protected Workstation Considerations

Menda notes that nylon probes may be suitable for use in ESD-protected areas under appropriate conditions.

Nylon absorbs moisture from its surroundings, which can affect its electrical resistance and electrostatic behavior.

Handling the probe with bare hands for several minutes may allow it to absorb sufficient moisture for certain ESD-sensitive applications.

However, dry nylon can remain electrically insulative and retain electrostatic charge.

Where gloves are worn or moisture exposure is limited, appropriate antistatic treatment may be required.

Always follow your facility's ESD-control procedures and verify tool suitability before use around static-sensitive components.

Temperature-Resistant Nylon

The nylon construction provides temperature resistance for suitable electronics handling and soldering preparation tasks.

However, the probes should not be placed in direct contact with soldering iron tips, molten solder, or other high-temperature surfaces.

Use them for positioning and mechanical handling rather than as substitutes for specialized heat-rated soldering tools.

Convenient 10-Pack for Multiple Workstations

This package contains 10 individual Menda 35622 probes.

The quantity makes it convenient to supply several technicians or maintain multiple electronics assembly stations.

It is also useful for repair departments where spudgers are frequently used and spare tools help keep work moving.

Each probe can be used independently, allowing tools to be distributed among workstations as needed.

Care and Maintenance

Keep the probes clean and free from adhesive, flux residue, and abrasive debris.

Inspect the pointed tips, flat blades, and wire notches periodically for wear or damage.

Replace probes that develop cracks, chips, or significant deformation.

Avoid excessive prying force and do not use the tools as heavy-duty levers.

Disconnect power before working on electronic equipment and follow appropriate ESD-control procedures.

Frequently Asked Questions

What is Menda 35622-10?

It is a package of 10 black nylon point-blade spudgers designed for electronics assembly and repair.

How many probes are included?

The package contains 10 individual probes.

Are these the same probes as Menda 35622?

Yes. The 35622-10 package contains ten of the individual Menda 35622 point-blade probes.

How long is each probe?

Each probe is approximately 6 inches long.

What material are the probes made from?

They are manufactured from fiberglass-filled nylon.

What color are the probes?

All 10 probes are black.

What is a black stick?

A black stick is a nonmetallic spudger or probe commonly used for opening electronic housings and manipulating small parts.

Do the probes have two working ends?

Yes. Each tool has a pointed probe tip and a flat blade tip.

What is the pointed end used for?

It is useful for guiding wires, positioning components, and reaching confined areas.

What is the flat blade used for?

It helps separate plastic housings, manipulate small parts, and position wires.

Do the probes have a wire notch?

Yes. Each probe includes a molded notch for handling wires and small components.

Can these probes be used for smartphone repair?

Yes. They are useful for appropriate plastic housing separation and component-handling tasks.

Can they be used for laptop repair?

Yes. They can assist with opening compatible housings and positioning internal parts.

Can they be used on printed circuit boards?

Yes, for suitable mechanical positioning and handling tasks while following appropriate ESD precautions.

Can the probes be used for soldering?

They are useful for soldering preparation and component positioning, but direct contact with molten solder or hot soldering iron tips should be avoided.

Are the probes temperature-resistant?

Yes. Menda describes the nylon material as temperature-resistant.

Can they touch a hot soldering iron?

No. Direct contact with a hot soldering iron tip is not recommended.

Will the nylon scratch plastic surfaces?

The nylon finish is designed to help minimize marking, but scratching can still occur if excessive force is used or abrasive debris is present.

Are these tools made from metal?

No. The probes are made from glass-filled nylon.

What is the benefit of glass-filled nylon?

Glass-fiber reinforcement adds rigidity and strength compared with ordinary unfilled nylon.

Are the probes ESD-safe?

Menda states that they may be suitable for ESD-protected areas under appropriate conditions. Dry, untreated nylon can be electrically insulative.

Why does moisture affect ESD suitability?

Nylon absorbs moisture, which can change its electrical resistance and charge behavior.

Can these probes be used around static-sensitive components?

Yes, when their suitability has been established and appropriate ESD-control procedures are followed.

Do they require antistatic treatment?

In some environments, particularly where gloves are worn and moisture exposure is limited, antistatic treatment may be necessary.

Are the probes electrically insulated for live work?

No. They are not certified insulated electrical safety tools.

Can they be used to remove batteries?

They can assist with removing accessible batteries when appropriate for the device and battery design.

Can they be used to open plastic clips?

Yes, for suitable light-duty separation tasks using controlled pressure.

Are the probes reusable?

Yes. They are designed for repeated use when properly maintained.

Can they be cleaned?

Yes. Remove debris using methods compatible with nylon and the contaminants involved.

Is this package suitable for professional repair shops?

Yes. The 10-pack is convenient for repair departments, assembly facilities, and multiple technician workstations.

Can hobbyists use these tools?

Yes. They are suitable for hobby electronics and appropriate small-part handling tasks.

Is this a single probe or a multipack?

It is a multipack containing 10 probes.

Where are the probes manufactured?

They are made in the United States.

Micro-Tools makes every attempt to provide accurate information for each item. Actual packaging and/or specifications may be slightly different from the information and picture provided.