Menda 6 oz Blue durAstatic ESD-Safe Toluene Dispenser with One-Touch Pump – 35760
Keep toluene conveniently accessible at designated cleaning and manufacturing workstations with this 6 oz blue durAstatic ESD-safe dispenser. Featuring a stainless steel One-Touch pump and preprinted TOLUENE chemical identification, this refillable dispenser combines controlled liquid application with static-dissipative bottle construction for appropriate electronics manufacturing and industrial environments.
The One-Touch pump provides convenient one-handed dispensing, allowing compatible liquid to be applied directly to cotton swabs, cleaning pads, wipes, and other suitable applicators. Its push-down design eliminates the need to pour directly from an open bottle during routine cleaning tasks.
Manufactured from Menda's durAstatic high-density polyethylene (HDPE), the blue bottle features long-lasting static-dissipative properties designed to help control electrostatic charge near sensitive electronic assemblies.
The bottle is preprinted with TOLUENE identification and Globally Harmonized System (GHS) hazard communication information, including chemical hazard pictograms and the Danger signal word. This helps employees identify the intended contents and recognize associated hazards.
The durAstatic material contains no migratory antistatic additives, helping reduce contamination concerns associated with additives that can transfer to surrounding surfaces. An embossed ESD protective symbol further identifies the container as suitable for appropriate static-control applications.
The stainless steel One-Touch pump uses a return-flow dispensing mechanism. Liquid remaining in the pump well can drain back into the bottle, providing convenient dispensing for applications where return flow is acceptable.
With its compact 6 oz capacity, refillable construction, and clearly printed chemical identification, this dispenser is a practical choice for controlled liquid application at appropriately equipped electronics, laboratory, and industrial workstations.
The dispenser is supplied empty and includes one blue durAstatic bottle with its stainless steel One-Touch pump.
Features & Benefits
-
6 oz Capacity: Holds approximately 177 mL of compatible liquid.
-
Blue durAstatic HDPE Bottle: Static-dissipative construction designed for ESD-controlled work areas.
-
Stainless Steel One-Touch Pump: Provides convenient manual dispensing without pouring from the bottle.
-
One-Handed Operation: Allows liquid to be applied directly to compatible swabs, wipes, and cleaning pads.
-
Return-Flow Pump Design: Unused liquid in the dispensing well can drain back into the bottle.
-
Preprinted TOLUENE Identification: Clearly identifies the intended chemical contents.
-
GHS Hazard Communication Label: Includes chemical hazard pictograms and the Danger signal word.
-
ESD Protective Symbol: Embossed marking identifies the bottle as an ESD-protective container.
-
Static-Dissipative Properties: Helps control electrostatic charge in appropriate work environments.
-
No Migratory Antistatic Additives: Helps reduce contamination associated with migrating surface treatments.
-
Durable HDPE Construction: Suitable for repeated use with compatible liquids.
-
Compact Workstation Size: Convenient for designated electronics and industrial cleaning stations.
-
Refillable Bottle: Can be reused when maintained according to chemical handling procedures.
-
Complete Dispenser: Includes the bottle and stainless steel One-Touch pump.
-
Made in the USA: Genuine Menda dispenser manufactured in the United States.
Specifications
-
Brand: Menda
-
Manufacturer Part Number: 35760
-
SKU: 35760
-
Product Type: ESD-Safe Liquid Dispenser
-
Product Series: durAstatic
-
Pump Type: One-Touch
-
Pump Material: Stainless Steel
-
Pump Operation: Manual Push-Down
-
Pump Design: Return-Flow
-
Pump Locking Feature: No
-
Bottle Capacity: 6 fl oz (Approximately 177 mL)
-
Bottle Material: High-Density Polyethylene (HDPE)
-
Bottle Color: Blue
-
Electrical Classification: Static-Dissipative
-
Resistance, RTT: 1 × 10⁴ to Less Than 1 × 10¹¹ Ohms
-
Resistance Test Method: ANSI/ESD STM11.12
-
Charge Decay: Less Than 2 Seconds
-
Charge Decay Test Reference: IEC 61340-2-3:2016
-
Chemical Identification: TOLUENE
-
Label Type: Preprinted GHS / Right-to-Know Hazard Communication Label
-
Signal Word: Danger
-
ESD Marking: Embossed ESD Protective Symbol
-
Antistatic Additives: No Migratory Additives
-
Refillable: Yes
-
Supplied Contents: Empty Bottle with Stainless Steel One-Touch Pump
-
Package Quantity: 1 Complete Dispenser
-
Country of Origin: United States
Ideal For
-
Designated toluene dispensing stations
-
Electronics manufacturing facilities
-
ESD-protected work areas
-
Industrial precision cleaning
-
Laboratory liquid dispensing
-
Applying compatible solvents to cleaning swabs
-
Moistening appropriate cleaning wipes and pads
-
Technical maintenance departments
-
Electronics repair and rework
-
Manufacturing workstations requiring chemical identification
-
Facilities using GHS-labeled chemical containers
-
Static-sensitive production environments
-
Refillable solvent dispensing systems
-
Workstations with established solvent safety procedures
Blue durAstatic ESD-Safe Bottle
The blue bottle is manufactured from Menda's durAstatic HDPE material.
Unlike conventional plastic bottles, durAstatic material is designed to provide static-dissipative properties for appropriate electronics manufacturing and repair environments.
Ordinary plastic containers may accumulate electrostatic charge through handling, friction, and contact with other materials.
The dissipative properties of this bottle help reduce unwanted charge accumulation when used as part of an established ESD-control program.
Menda specifies an RTT resistance range of 1 × 10⁴ to less than 1 × 10¹¹ ohms, tested according to ANSI/ESD STM11.12.
The material also provides charge decay of less than two seconds under the manufacturer's specified test conditions.
These characteristics make the bottle useful at workstations where static-sensitive electronic assemblies are handled.
Stainless Steel One-Touch Pump
The dispenser includes Menda's stainless steel One-Touch pump.
This manually operated pump allows liquid to be dispensed with a simple downward press.
Place a compatible cotton swab, wipe, or cleaning pad against the pump surface and press to dispense liquid into the top well.
This arrangement provides convenient access to small working quantities of solvent without pouring from the bottle.
The pump is designed for repeated use in professional liquid dispensing applications.
It is not a locking pump and should be kept upright during use and storage.
Return-Flow Dispensing Design
The One-Touch pump uses a return-flow mechanism.
After liquid is dispensed into the pump well, unused liquid can drain back into the bottle.
This is convenient for applications where return flow is acceptable.
For processes where preventing dispensed liquid from returning to the container is important, Menda offers non-return pump designs such as Pure-Touch.
Select the dispensing system that meets the contamination-control requirements of your application.
Convenient One-Handed Liquid Application
The push-down pump allows technicians to dispense liquid without lifting or tipping the bottle.
This can be useful when cleaning small components or performing repetitive maintenance tasks.
A compatible cleaning swab or pad can be pressed against the pump top to obtain a working quantity of liquid.
The pump design helps reduce the need to handle an open container during application.
Always use the dispenser in an appropriately ventilated area and follow the chemical manufacturer's safety instructions.
Preprinted TOLUENE Identification
The bottle is preprinted with TOLUENE identification.
This helps employees recognize the intended chemical contents and distinguish the dispenser from bottles used for acetone, isopropanol, or other cleaning liquids.
Clear identification is particularly important at facilities where multiple solvents are used.
The bottle should be filled only with a compatible toluene formulation that matches its printed identification and hazard information.
Do not fill it with another chemical while leaving misleading labeling in place.
GHS Hazard Communication Label
The bottle includes preprinted GHS hazard communication information.
The label features chemical hazard pictograms and the Danger signal word.
These markings help communicate hazards associated with the intended chemical contents.
The preprinted labeling is designed to support workplace hazard communication practices.
Facilities must verify that the printed information is appropriate for the exact chemical formulation being used.
The label does not replace the chemical manufacturer's Safety Data Sheet or other applicable safety requirements.
No Migratory Antistatic Additives
Menda's durAstatic material is formulated without migratory antistatic additives.
Some antistatic plastics rely on additives that migrate to the material's surface.
These migrating substances may create contamination concerns in sensitive manufacturing environments.
The durAstatic formulation helps reduce the potential for contamination associated with this type of antistatic treatment.
This makes the bottle useful for appropriate electronics manufacturing and precision cleaning processes.
Embossed ESD Protective Symbol
The bottle features an embossed ESD protective symbol.
This marking helps employees recognize the container as a product intended for static-control applications.
It also distinguishes the dispenser from ordinary plastic bottles.
The ESD symbol does not replace personnel grounding, grounded work surfaces, or other established ESD-control procedures.
Toluene Dispensing Applications
Toluene is an industrial solvent used in certain cleaning, manufacturing, and maintenance processes.
This dispenser provides a convenient way to apply compatible toluene formulations to appropriate cleaning applicators.
Before use, verify that the solvent is compatible with the complete dispenser and the materials being cleaned.
Toluene can damage certain plastics, coatings, adhesives, and other materials.
Always test or confirm material compatibility before applying it to sensitive assemblies.
Use the dispenser only in work areas equipped for safe handling of the chemical.
Toluene Safety and Handling
Toluene is a highly flammable liquid with significant health hazards.
Use the dispenser only with appropriate ventilation and workplace chemical controls.
Keep the filled container away from heat, sparks, flames, and other ignition sources.
Avoid breathing vapors and prevent unnecessary skin or eye contact.
Follow the chemical manufacturer's Safety Data Sheet and use appropriate personal protective equipment.
The static-dissipative bottle helps address electrostatic concerns but does not eliminate the flammability or health hazards associated with toluene.
The One-Touch pump is not a sealed transport closure. Store and handle filled dispensers according to applicable chemical safety requirements.
Care and Maintenance
Keep the pump and bottle clean to maintain reliable operation.
Inspect the bottle regularly for cracks, deformation, leaks, or other signs of chemical incompatibility.
Check that the stainless steel pump operates smoothly and dispenses liquid correctly.
Avoid mixing chemicals or introducing contaminants into the bottle.
Keep the printed TOLUENE identification visible and ensure the contents match the labeling.
Store the filled dispenser according to the chemical manufacturer's requirements.
Replace the dispenser if damaged or no longer functioning correctly.
Frequently Asked Questions
What is Menda 35760?
It is a 6 oz blue durAstatic ESD-safe liquid dispenser with a stainless steel One-Touch pump and preprinted TOLUENE identification.
What is the bottle capacity?
The bottle holds 6 fl oz, approximately 177 mL.
Is this a complete dispenser?
Yes. It includes the bottle and stainless steel One-Touch pump.
Is the dispenser supplied filled with toluene?
No. The dispenser is supplied empty.
What chemical is printed on the bottle?
The bottle is preprinted with TOLUENE.
What color is the bottle?
The bottle is blue.
What material is the bottle made from?
It is manufactured from high-density polyethylene (HDPE).
Is the bottle ESD-safe?
It is made from static-dissipative durAstatic material designed for appropriate ESD-controlled applications.
What is the bottle's resistance range?
Menda specifies RTT resistance from 1 × 10⁴ to less than 1 × 10¹¹ ohms.
What is the charge decay time?
The manufacturer specifies less than two seconds under the stated test conditions.
Does the bottle have an ESD symbol?
Yes. It features an embossed ESD protective symbol.
Does the bottle contain migratory antistatic additives?
No. Menda specifies that durAstatic bottles contain no migratory antistatic additives.
What is a One-Touch pump?
It is a push-down dispensing pump that brings liquid into a top well with a simple press.
Can the pump be operated with one hand?
Yes. It is designed for convenient one-handed dispensing.
Does unused liquid return to the bottle?
Yes. The One-Touch pump uses a return-flow design.
Does the pump have a locking mechanism?
No. This model uses a standard nonlocking One-Touch pump.
What material is the pump made from?
The pump is manufactured from stainless steel.
Can it dispense liquid onto cotton swabs?
Yes. The pump is convenient for moistening compatible cotton swabs.
Can it be used with cleaning pads and wipes?
Yes. Suitable cleaning pads and wipes can be pressed against the pump top.
Is the dispenser intended for toluene?
Yes. It is specifically printed and identified for toluene.
Can it be used with isopropyl alcohol?
This model is labeled TOLUENE. For isopropyl alcohol, select a dispenser with appropriate chemical identification.
Can it be used with acetone?
This model is labeled TOLUENE. For acetone, select an appropriately labeled dispenser and verify chemical compatibility.
Does the bottle include GHS hazard labeling?
Yes. It includes GHS chemical hazard communication information.
What signal word is printed on the bottle?
The manufacturer specifies the Danger signal word.
Does the printed label replace all workplace labeling requirements?
No. Facilities must still follow applicable chemical labeling and hazard communication requirements.
Can it be used in electronics manufacturing?
Yes. It is designed for appropriate electronics manufacturing and ESD-controlled workstations.
Can it be used for printed circuit board cleaning?
It may be used to dispense a compatible solvent for appropriate cleaning applications. Always verify that toluene is suitable for the specific assembly and materials.
Is the bottle refillable?
Yes. It is designed for repeated use with compatible liquids.
Can it be used around energized equipment?
No. Disconnect electrical power before cleaning equipment and follow applicable chemical safety procedures.
Does the ESD-safe bottle make toluene nonflammable?
No. Toluene remains highly flammable and requires appropriate handling and storage.
Does the dispenser prevent exposure to toluene vapors?
No. The pump does not eliminate vapor exposure. Use appropriate ventilation and chemical safety controls.
What is the difference between Menda 35735 and 35760?
Both use blue 6 oz durAstatic bottles and One-Touch pumps. Model 35735 is printed ISOPROPANOL, while model 35760 is printed TOLUENE.
What is the difference between Menda 35730 and 35760?
Both use blue 6 oz durAstatic bottles and One-Touch pumps. Model 35730 is printed ACETONE, while model 35760 is printed TOLUENE.
Is a bottle-only replacement available?
Yes. Menda 35761 is the blue 6 oz TOLUENE-labeled replacement bottle without a pump.
Are other bottle colors available?
Yes. Menda offers related TOLUENE-labeled replacement bottles in yellow, orange, and green.
Is this a single dispenser or a multipack?
The package contains one complete dispenser.
Where is Menda 35760 manufactured?
It is made in the United States.
| SKU: | 35760 |
| UPC: | 363674122769 |
| Brand: | Menda |
| MPN: | 35760 |
| Made In: | United States |
