Wiha T5 Torx L-Key, 36mm, Hardened CVM Steel – 36305
Work with small Torx fasteners using this precision-machined T5 L-key, designed for controlled fastening and adjustment in compact assemblies. Manufactured from Wiha's high-performance chrome-vanadium-molybdenum (CVM) tool steel, it combines a precisely formed Torx tip with a hardened steel construction for dependable performance.
The L-shaped design provides two working arms, allowing the tool to be positioned according to the available clearance and the amount of turning leverage needed. Its compact size is especially convenient when working with small fasteners in equipment housings, precision mechanisms, and other assemblies where a full-size screwdriver may be difficult to use.
Wiha precision-machines the Torx profile for accurate engagement with properly sized fasteners. The six-lobe design helps distribute turning force across the fastener recess, reducing the tendency of the tool to slip when compared with conventional straight-slot drives.
The steel is through-hardened for durability and finished with a black oxide coating. This combination provides a practical tool for repeated fastening operations while helping protect the steel surface during normal use.
Made in Germany, this T5 Torx L-key is a useful addition to precision repair kits, electronics service benches, and professional maintenance tool collections.
Features & Benefits
-
T5 Torx Drive: Designed for fasteners with a standard T5 internal Torx recess.
-
Precision-Machined Tip: Provides accurate engagement with correctly sized fasteners.
-
36 mm Nominal Length: Compact configuration for small-scale fastening applications.
-
L-Shaped Design: Provides two working arms for access and leverage.
-
Wiha CVM Tool Steel: Manufactured from high-performance chrome-vanadium-molybdenum steel.
-
Through-Hardened Construction: Designed for durability and wear resistance.
-
Black Oxide Finish: Helps protect the steel surface against corrosion.
-
Six-Lobe Torx Profile: Supports efficient transfer of turning force.
-
Compact Tool Size: Convenient for precision mechanisms and small equipment assemblies.
-
Manual Operation: Provides direct control when installing or removing small fasteners.
-
Reusable Professional Tool: Suitable for routine assembly and maintenance.
-
Made in Germany: Manufactured by Wiha.
Specifications
-
Brand: Wiha
-
Manufacturer Part Number: 36305
-
SKU: 36305
-
UPC: 084705363059
-
Product Type: Torx L-Key
-
Drive Profile: Standard Internal Torx
-
Drive Size: T5
-
Nominal Length: 36 mm (Approximately 1.42")
-
Tool Configuration: L-Shaped
-
Material: Chrome-Vanadium-Molybdenum Tool Steel
-
Hardening: Through-Hardened
-
Finish: Black Oxide
-
Operation: Manual
-
Package Quantity: 1 L-Key
-
Country of Origin: Germany
Ideal For
-
Installing and removing T5 Torx screws
-
Electronics equipment servicing
-
Precision mechanical assembly
-
Small equipment repairs
-
Instrument maintenance
-
Compact fastening applications
-
Hobby and model-building projects
-
Technical repair benches
-
Professional maintenance tool kits
-
Recessed fasteners where the tool dimensions permit access
Precision T5 Torx Drive
The T5 Torx profile features six rounded lobes designed to engage the corresponding fastener recess.
This geometry helps distribute turning force across multiple contact surfaces rather than concentrating pressure at two opposing points.
Wiha's precision-machined tip is designed to fit correctly sized T5 fasteners accurately.
Proper engagement helps reduce slipping and unnecessary wear on both the tool and fastener.
Always verify the fastener's drive size before use. A T5 tool should not be substituted for a larger or smaller Torx size.
Compact L-Shaped Configuration
The L-key design offers flexibility when working in restricted spaces.
One arm can be inserted into the fastener while the other provides a gripping surface for turning.
Depending on the available clearance, the tool can be repositioned to improve access or leverage.
The compact configuration makes it useful for small assemblies where a conventional screwdriver handle may interfere with surrounding components.
Because T5 fasteners are relatively small, apply turning force carefully to avoid damaging the screw or surrounding equipment.
Wiha CVM Tool Steel
The tool is manufactured from Wiha's high-performance chrome-vanadium-molybdenum steel.
This alloy is selected for its strength and durability in precision hand tools.
The steel is through-hardened to provide resistance to wear during repeated fastening operations.
A correctly sized, hardened tool helps maintain reliable engagement with the fastener over time.
Avoid using the L-key as a pry bar or applying excessive force that could bend or damage it.
Black Oxide Finish
The black oxide surface provides a protective finish while retaining the tool's compact dimensions.
It also gives the L-key its characteristic dark appearance.
Black oxide offers some corrosion protection, but it does not make the tool rustproof.
Keep the L-key clean and dry after use, particularly when it has been exposed to moisture or contaminants.
Torx vs. Torx Plus
This tool is designed for standard T5 Torx fasteners.
Torx Plus uses a different drive profile and is identified by sizes such as IP5 rather than T5.
Although the two systems look similar, they are not the same specification.
Use the correct drive profile to achieve proper engagement and reduce the risk of fastener damage.
Professional Repair and Assembly Applications
Small Torx fasteners are commonly found in compact mechanical and electronic equipment.
This L-key provides a convenient manual tool for assembly, adjustment, and service work involving T5 screws.
Its small size makes it easy to include in precision tool kits and workstation storage.
For sensitive electronic equipment, follow appropriate power-disconnection and ESD-control procedures before beginning service.
Care and Maintenance
Keep the Torx tip free from debris that could interfere with fastener engagement.
Inspect the tool periodically for twisting, rounding, or other damage.
Use the correct drive size and maintain alignment with the fastener during turning.
Avoid extensions or improvised leverage that could overload the tool or damage small screws.
After use, wipe the L-key clean and store it in a dry location.
This is a non-insulated hand tool and should not be used on energized electrical equipment.
Frequently Asked Questions
What is Wiha 36305?
It is a precision-machined T5 Torx L-key made from hardened CVM tool steel.
What size fastener does it fit?
It is designed for standard T5 Torx fasteners.
What is the nominal length?
The listed length is 36 mm, approximately 1.42 inches.
Is this a screwdriver or an L-key?
It is an L-shaped hand key rather than a screwdriver with a separate handle.
What material is it made from?
Wiha high-performance chrome-vanadium-molybdenum tool steel.
Is the steel hardened?
Yes. The tool is through-hardened.
What finish does it have?
It has a black oxide finish.
What is the advantage of the L-shaped design?
It provides two working arms that can be used for access and turning leverage.
Can it be used for electronics repair?
Yes, when the equipment uses standard T5 Torx fasteners.
Can it be used on larger Torx screws?
No. Select the correct Torx size for the fastener.
Is T5 the same as IP5 Torx Plus?
No. Standard Torx and Torx Plus are different drive profiles.
Does it have a ball end?
A ball-end configuration is not specified for this tool.
Can it be used with a power driver?
No. It is a manually operated L-key.
Is it insulated for electrical work?
No electrical insulation rating is specified. Do not use it on energized equipment.
Is it suitable for repeated professional use?
Yes. Its hardened tool steel construction is designed for regular fastening applications.
Does it include a complete Torx key set?
No. This listing is for one T5 L-key.
How should it be stored?
Store it in a clean, dry location to help protect the tip and finish.
Where is it made?
It is manufactured in Germany.
| SKU: | 36305 |
| UPC: | 084705363059 |
Sales are limited to stock on hand only as this is a Clearance Sale Item.
,
