Tronex 50 Degree Long Oval Flush Cutters - 5072 and 7072

Reach wires and component leads in crowded work areas with a 50-degree angled cutting head and a robust long oval profile. These cutters provide an alternative approach when surrounding components make it difficult to position a conventional cutter.

Flush cutting edges feature a very small bevel that leaves only a slight pinch on the cut end, balancing close-cutting performance with edge durability. The relieved head profile provides additional clearance for detailed electronics assembly and soft copper wire trimming.

Choose standard handles for a compact tool or long ergonomic handles for a larger gripping area. Both models are manufactured in the USA from hardened carbon steel and feature double-sheathed, ESD-safe cushioned grips.

Features and Benefits

• 50-Degree Angled Head: Helps reach cutting points in crowded assemblies and restricted work areas.

• Large Long Oval Head: Provides a robust cutting profile for trimming soft copper wire and component leads.

• Flush Cutting Edges: Produce close cuts with only a small pinch remaining on the wire end.

• Relieved Head Profile: Provides additional clearance around nearby components.

• ESD-Safe Cushion Grips: Double-sheathed grips provide cushioned handling for static-sensitive work.

• Two Handle Options: Choose standard or long ergonomic handles to suit your grip preference.

Available Variants

Tronex 5072 - Standard Handles

Measures 4.8 inches overall and features standard-length handles. This is the more compact option for users who prefer a shorter tool.

Tronex 7072 - Long Ergonomic Handles

Measures 5.8 inches overall and features longer ergonomic handles. The extended handles provide a larger gripping area without changing the cutting head or wire capacity.

Both models have the same 50-degree long oval head, Flush cutting edges, and soft copper wire capacity. Select your preferred handle style from the available options.

Specifications

• Brand: Tronex

• Models: 5072 and 7072

• Tool Type: Angulated Long Oval Cutter

• Head Angle: 50 Degrees

• Head Shape: Large Long Oval

• Head Profile: Relief

• Cutting Edge: Flush

• Material: Hardened Carbon Steel

• Material Hardness: 62 to 63 HRC

• Tip Length: 0.69 inch or 17.5mm

• Soft Copper Wire Capacity: 0.008 to 0.039 inch

• Metric Cutting Capacity: 0.2 to 1.0mm

• Specified Wire Gauge Range: 32 to 18 AWG

• 5072 Overall Length: 4.8 inches

• 7072 Overall Length: 5.8 inches

• Grip Type: Double-Sheathed ESD-Safe Cushion Grips

• Country of Manufacture: USA

Applications

Suitable for electronics assembly, component lead trimming, and precision soft copper wire cutting. The angled head is especially useful when surrounding components limit access to the cutting point.

All cutting capacities apply to soft copper wire. Stay within the specified capacity and use a cutter specifically rated for harder materials.

Frequently Asked Questions

What is the difference between the 5072 and 7072?

The 5072 has standard handles and measures 4.8 inches overall. The 7072 has long ergonomic handles and measures 5.8 inches overall. Both models have the same cutting head, Flush edges, and soft copper wire capacity.

What is the advantage of the 50-degree angled head?

The angled head provides a different approach to the cutting point, helping you reach wires and leads when nearby components restrict access.

What wire sizes can these cutters handle?

Both models are rated for soft copper wire from 0.008 to 0.039 inch in diameter, approximately 0.2 to 1.0mm. The specified wire gauge range is 32 to 18 AWG. This rating does not establish suitability for steel, memory wire, or other harder materials.

Are these Flush or Razor Flush cutters?

Both models have Flush cutting edges. Flush edges have a very small bevel that leaves a slight pinch on the cut end. Razor Flush edges have no bevel and leave virtually no raised material.

Does the longer handle increase cutting capacity?

No. The 7072 provides longer ergonomic handles, but its rated cutting capacity is the same as the 5072.

Are both handle options ESD safe?

Yes. Both models have double-sheathed, ESD-safe cushioned grips.

Where are these cutters manufactured?

Both the Tronex 5072 and 7072 are manufactured in the USA.

Please visit our "Selecting a Cutter" guide to help in the selection of the right cutter.

All Cutting Capacity Ratings are for soft copper wire.